REPAIR / REPLACEMENT OF INTERNAL ELECTRIC SUPPLY CEILING FAN EXHAUST FAN WALL FAN AND SOLAR GEYSER AT DARJIPURA AT AF STN BARODA

Amount

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs complete all as specified and directed

Material and labour for point wiring for one light point or one fan point or one fan point controlled by one switch with using 1.5 Sq mm (nominal area) stranded copper conductor single core, PVC insulated & unsheathed cable, 1100 volts grade in existing concealed PVC conduit of 20mm dia/as exist on site all as specified and directed with using new sunken type Pre - coated 120 GSM (Gram Per m²) GI sheet pressed steel box including modular cover plate for mounting modular switch socket etch incl all accessories and using 1.5 Sq mm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable (In green colour) as in earth wire connected to common earth dolly complete all as specified and directed.

Note : (i) The quoted rates shall be deemed to be inclusive of sunction boxes/modular cover plate and cutting chases in brick walls/pillars etc for concealing the depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the portion of point wiring at for covering / fix sunken boards/terminal boxes/junction boxes of any shape and size . (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for seperatly of cencern item of Sch’A’. (iii)The contractor shall be responsible for doing point wiring as per the instruction of concerned JE(E/M) and AGE(E/M). Being maintenance work Contractor shall carry out single point wiring or associated work as per the direction of concerned JE(E/M). Delay in any work more than of 3 days after allocation will invite recovery at the double rate of quoted rate. Contractor shall depute a team of electrician and helper on daily basis at Darjipura Main receiving station to carry out maintenance within stipulated time.without fail

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One bell point controlled by one way switches

One light point controlled by two way switches

All as per item No. 2.00 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board complete all as specified and directed

All as per item No.2.00 above but wiring with 4 sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and directed

S/F switch Modular type single pole one way 6 Amp 240 Volts complete all as specified and directed

S/F switch Modular type single pole one way 16 Amp 240 Volts. complete all as specified and directed

S/F socket only 6 Amps 2 in 1 Socket with Shutter Modular type 240 Voltcomplete all as specified and directed

S/F socket only 6/16 Amps Twin Socket Modular type 240 Volt complete all as specified and directed

S/F in repair Bell push switch Modular type single pole one way 10 Amp 240 Volts. complete all as specified and directed

S/F in repair Fan Regulator 2M FSC Modular type 240 Volts. complete all as specified and directed

Material and labour for point wiring for one light point or one fan point or one fan point controlled by one switch with using 1.5 Sq mm (nominal area) stranded copper conductor single core, PVC insulated & unsheathed cable, 1100 volts grade in existing concealed PVC conduit (medium grade) of 20mm dia/as exist on site all as specified and directed with using new sunken type Pre - coated 120 GSM (Gram Per m²) GI sheet pressed steel box including 3 mm thick plastic laminated sheet top cover with 4 Nos SS screw and washer for mounting of paino type switches, sockets and fan regulators etc incl all accessories and using 1.5 Sq mm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable (In green colour) as in earth wire connected to common earth dolly complete all as specified and directed.

Note : (i) The quoted rates shall be deemed to be inclusive of sunction boxes and cutting chases in brick walls/pillars etc for concealing the depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the portion of point wiring at for covering / fix sunken boards/terminal boxes/junction boxes of any shape and size . (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for seperatly of cencern item of Sch’A’. The contractor shall be responsible for doing point wiring as per the instruction of concerned JE(E/M) and AGE(E/M). Being maintenance work Contractor shall carry out single point wiring or associated work as per the direction of concerned JE(E/M). Delay in any work more than of 3 days after allocation will invite recovery at the double rate of quoted rate. Contractor shall depute a team of electrician and helper on daily basis at Darjipura Main receiving station to carry out maintenance within stipulated time.without fail

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One bell point controlled by one way switches

One light point controlled by two way switches

All as per item No. 11.00 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board complete all as specified and directed

All as per item No.11.00 above but wiring with 4 sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and directed

M&L for point wiring for one light or one fan point controlled by one switch with using 1.5 Sq mm (nominal area) stranded copper conductor single core PVC insulated & unsheathed cable 1100 volts grade in and incl PVC casing and capping of suitable size fixed on surface all as directed with using new sunken type pressed steel box/terminal boxes for mounting fittings/junction boxes not less than 1.6 mm thick duly painted with two coats of black bituminous paint over a coat of red oxide primer with and incl all accessories and using 1.5 Sq mm (nominal area) stranded copper conductor single core conductor PVC insulated & unsheathed cable as in earth wire connected to commen earth dolly complete all as specified and directed

Note : (i) The quoted rates shall be deemed to be inclusive for fixing the PVC casing caping to surface with using PVC of covering sunken boards /terminal boxes/junction boxes of any shape and size with 3 mm thick suitable GI screws and cup washers. (ii) Fititngs like switches, sockets, regulators lamp holders light fittings shall be measured and paid appropriate item of schedule ‘A’ (iii) The contractor shall be responsible for doing point wiring as per the instruction of concerned JE(E/M) and AGE(E/M). Being maintenance work Contractor shall carry out single point wiring or associated work as per the direction of concerned JE(E/M). Delay in any work more than of 3 days after allocation will invite recovery at the double rate of quoted rate. Contractor shall depute a team of electrician and helper on daily basis at Darjipura Main receiving station to carry out maintenance within stipulated time.without fail

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One light point controlled by two way switches

One bell point controlled by one way switches

All as per item No.14.00 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and directed

All as per item No.14.00 above but wiring with 4 sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and directed

S&F for piano switch flush type 5 Amps single pole, one way, 230 volts AC circuit complete all as specified & directed.

S&F for piano switch Swich piano, bell push, 6 Amps, flush type, 230/250 Volts, 50 Hz supply. complete all as specified and directed

S&F for piano switch flush type 15 Amps single pole, one way 230 volts AC circuit complete all as specified and directed

S&F for socket out let 2 in 1, 3 pin 5 Amps flush type, 230 volts Ac circuit complete all as specified and directed

S&F for socket out let 2 in 1 multipurpose three pin, 15 Amps & three pin 5 Amps controlled by one switch, flush type 230 volts AC circuit complete all as specified & directed.

S&F for ceiling rose PVC polycarbonate isolated body 63.5x20 mm three terminal complete all as specified and directed

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

M & L in repair for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Casing Caping/PVC Conduit or in existing concealed conduit(as required & directed by Engr-in-Charge)accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed complete all as specified and directed Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

All as above item No.24.00 but using 4 Sqmm cable for phase and neutral and 4 Sqmm for earth wire complete all as specified and directed Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

Note:(for item 24.00 & 25.00): The contractor shall be responsible for doing point wiring as per the instruction of concerned JE(E/M) and AGE(E/M). Being maintenance work Contractor shall carry out single point wiring or associated work as per the direction of concerned JE(E/M). Delay in any work more than of 3 days after allocation will invite recovery at the double rate of quoted rate. Contractor shall depute a team of electrician and helper on daily basis at Darjipura Main receiving station to carry out maintenance within stipulated time.without fail

Taking out old sunken box of any type and S/F in repair Concealed Galvanised (GI) metal flush Boxes Modular 3 module concealed and making good the disturbed surface by white cement & Existing color of old distamper complete all as specified and directed

Taking out old sunken box of any type and S/F in repair Concealed Galvanised (GI) metal flush Boxes Modular 4 module concealed along with white cover plate and making good the disturbed surfaceby white cement & Existing color of old distamper complete all as specified and directed

Taking out old sunken box of any type and S/F in repair Concealed Galvanised (GI) metal flush Boxes Modular 6 module along with white cover plate concealed and making good the disturbed surfaceby white cement & Existing color of old distamper complete all as specified and directed

Taking out old sunken box of any type and S/F in repair Concealed Galvanised (GI) metal flush Boxes Modular 10 module along with white cover plate concealed and making good the disturbed surfaceby white cement & Existing color of old distamper complete all as specified and directed

Supply and fixing in replacement 5 Amps Socket only 3 Pin flush type complete all as specified and directed

Supply and fixing in replacement 15 Amps Socket only 3 Pin flush typecomplete all as specified and directed

Supply and fixing in replacement 15 Amps Switch only 3 Pin flush type

Supply and fixing in replacement switchsocket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal 240 Volt. complete all as specified and directed

Supply and fixing in replacement switch socket combination 3 pin 16 Amp 2 flush type. Complete all as specified and directed

Supply and fixing in replacement switch piano flush type single pole one way 5 Amp 240 Volts. complete all as specified and directed

Supply and fixing in replacement switch piano flush type single pole two way 5 Amp 240 Volts. complete all as specified and directed

Supply and fixing in replacement switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt. complete all as specified and directed

Supply and fixing in replacement modular switch one way 6 Amps 1 module 240 Volts. complete all as specified and directed

Supply and fixing in replacement modular switch one way 16 Amps 1 module 240 Volts. complete all as specified and directed

Supply and fixing in replacement modular switch two way 6 Amps 1 module 240 Volts. complete all as specified and directed

Supply and fixing in replacement modular bell push way 6 Amps 1 module 240 Volts complete all as specified and directed

Supply and fixing in replacement modular socket outlet 6A 3 pin 2 module 240 Volts. complete all as specified and directed

Supply and fixing in replacement modular socket outlet 6A/16 5 pin 2 module 240 Volts. complete all as specified and directed

Supply and fixing in replacement modular fan regulator 120W-2 module 240 Volts. complete all as specified and directed

S/F Bell push flush type single pole 5 Amp 240 Volts. complete all as specified and directed

Supply and fix in replacement Bell ding dong type, one way, 240 volts, AC, ISI marked. complete all as specified and directed

S/F ceiling rose in replacement surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. complete all as specified and directed

Supply and fixing in repair stright/Angle bulb holder pvc body complete all as specified and directed

Supply and fixing in repair Stepped/socket type electronic fan regulator heavy duty typeA/C 240 V. complete all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S/F in repair TPN DBs Vertical type 4 way DB 415 volt with provision for FP MCCB as incomer and MCB SP as outgoing complete all as specified and directed

S/F in repair VTPN DBs Vertical type 6 way DB 415 volt with d (with provision for MCCB as incomer & MCB as outgoing) as outgoing complete all as specified and directed

S/F in repair sheet metal enclosure for single pole and neutral 12 way DB 240 voilts, 100 Amp rated bus bar. complete all as specified and directed

S/F in repair sheet metal enclosure for single pole and neutral 08 way DB 240 voilts, 100 Amp rated bus bar. complete all as specified and directed

S/F in repair sheet metal enclosure for single pole and neutral 04 way DB 240 voilts, 100 Amp rated bus bar. complete all as specified and directed

S/F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps.complete all as specified and directed

S/F in repair DB's MCB's of MCB SP up to 40 Amp 240 Volts 9 KA rupturing capacity conforming to IS-8828 complete all as specified and directed

S/F in repair MCB SP & N up to 63 Amp 240 Volts complete all as specified and directed

S/F in repair MCB SP & N up to 100 Amp 240 Volts complete all as specified and directed

S/F in repair MCB four pole up to 80 Amp 415 complete all as specified and directed

S/F in repair MCB (Four pole) 100 Amp 415 complete all as specified and directed

S & F in repair MCCB 100 Amp 16 KA complete all as specified and directed

M&L for Earthing complete as per electrical plate NO.3 of MES SSR Part I with galvanised steel plate earth electrode 600 mm x 600mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and incl galvanised iron or steel earth lead wire 4 mm dia by mneans of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia GI medium grade incl excavation and earth work in any type of soil, PCC pit, CI Frame, RCC covers complete all as specified and directed

S&F in replacement PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mm x 100mm x 50 mm complete all as specified and directed.

Do all as per serial item No. 64.00 above but for size 175x100x50 mm deep

Do all as per serial item No. 64.00 above but for size 200x150x50 mm deep

Do all as per serial item No. 64.00 above but for size 250x200x50 mm deep

Do all as per serial item No. 64.00 above but for size 350x200x50 mm deep

Supply and fix in replacement single phase electronic meters temper proof LCD display with polycarbonate cover 230 V,10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH Class 1 complete all as specified and directed.

Supply and fix in repair three phase electronic meters temper proof LCD display with polycarbonate cover 415 V,10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH Class 1 complete all as specified and directed.

S&F LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders connector block,etc complete with LED Lamp of 14W and all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed

Supply and fixing of PVC conduit size 25mm Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories including chase cutting such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including T-8 LED tube light 20W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC LED Batten with Opal Diffuser, IP20, Inbuilt Motion Sensor based Auto Dim/Brightness decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing LED inverter tube light fitting ENERGY Efficient 22 Watt 4 feet with min 4 hours battery back up complete all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

Supply and fixing LED Inverter luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, including 600mm long bracket with fastner bolt nut and washer for fix in wall complete all as specified and directed

Supply and fixing LED light fittings small 6 watt round/square type white/yellow complete with choke/driver complete all as specified nd as directed

Supply and fixing recess mounted down lighter 6 Watts complete all as specified and directed

Supply and fixing LED Inverter Street light fittings 30 watt, 220 V AC complete with driver, holders & LED lamp suitable for wall/roof/ ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix LED bulb Lamp 09/12 Watts Retrofit B22 holder type base wth polycorbonate diffuser and alluminiun heat sink. complete all as specified and directed

Taking down Unserviceable ceiling fan, sealing cable end,dismantling blades and removing fan and blades to E/M store complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic remote regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

Taking down the underviceable storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25 ltrs of any type and make, checking the serviceablity of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and replacing of unserviceable parts and assembly completet (considered as one unit) and and refixing/re-installing the same in position , and testing complete all as specified and directed Note :- replacement of unserviceable part such as heating element, thermostate, flexible pipe indicating lamp etc shall be measured and paid for separately under relavent items given below)

All as per serial item no 88.00 above but for capacity 50 ltrs.

Supply only heating elements, 1.5/2 KW any type any size and shape ISI mark 230 volts complete all as specified and directed

Supply only thermostat immersion point type 15 Amps, 230250 volts/AC ISI marked complete all as specified and directed

Supply only stainless steel flexible conneciton pipe with brass check nuts complete as per site requirement complete all as specified and directed

Supply only indicator lamp assembly for geyser complete all as specified and directed

Supply and fixing 15 Amp plug top Make : Anchor,Havells,colors complete all as specified and directed

Supply and fixing earth industrial plug top for socket for industrial socket metal glad suitable for 20 Amps metal glad MCB DB complete all as specified and directed

Supply and fixing earth industrial socket metal glad suitable for 20 Amps 240 volts metal glad MCB DB complete all as specified and directed

Supply only FR electrical insulation tape nominal size 0.125mm thickness x1.8 cm width x15 mtr length as IS CODE 1728 As per sample complete all as specified and directed

Supply and fix 4 sq mm 3 core flexible copper cable for maintenance of geyser, and cooling appliances complete all as specified and directed

Supply and fixng Hylum sheet Size 7” x 9”x3 mm thick with Brass screw and washers with necessary slots reqired for mounting the fixtures complete all as specified and directed

Supply and fixng Hylum sheet Size 9” x 6”x3 mm thick with Brass screw and washers with necessary slots reqired for mounting the fixtures complete all as specified and directed

Supply and fixng Hylum sheet Size 6” x 6”x3 mm thick with Brass screw and washers with necessary slots reqired for mounting the fixtures complete all as specified and directed

Supply and fixng Hylum sheet Size 9” x 11”x3 mm thick with Brass screw and washers with necessary slots reqired for mounting the fixtures complete all as specified and directed

Supply and fix syphon assembly suitable for 25/50 ltr geyser complete including nuts and washer complete all as specified and directed.

Supply and fix geyser brass tank for 25/50 ltr geyser complete including nuts, washer, glass wool etc complete all as specified and directed.

Supply and fix 23/.0076 sq mm 2 core flexible copper cable for maintenance of light/ fan etc complete all as specified and directed

Dismentling and taking out existing unserviceable geysor and deposited to E/M store yard complete all as specified and directed

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with,900RPM,Air delivery 1950 CuM / Hrs, heavy duty 4 blades, lubricated double ball bearing , frame,mounting accessories kit and louvers including taking out u/s exaust fan from site complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep,900 RPM , Air delivery 4400 CuM per Hour with,Heavy duty frame, blade, 4 blades, double ball bearing, frame,mounting accessories kit and louvers including taking out u/s exaust fan from site complete all as specified and directed

M&L for making hole of dia 300mm/450mm(inner dia) with using 300mm/450mm inner dia hume pipe in existing wall (wall thicknes upto 300mm) for fixing of exhaust fan and making good the existing surface with existing color complete all as specified and directed.

Supply, fixing and fabrication and testing desert cooler in GI body sheet with and including cooler fan motor size/sweep 450mm (fan blade only) 230 Volts, Single phase 50 Hz, 1400 RPM, heavy duty single sheet, totally enclosed. The overall dimesnions of the desert cooler shall not be less than 690mmx690mm x 1020mm with and including following accessories each. (a) Air grill of suitable size made out of 0.5mm PGI sheet including GSS arrangement with a knob for easy and smooth movement. (b) Front & Side panel made out of 1mm thick PGI sheet of suitable size and shape. (c) Water tank height shold not less than 11 inch made out of 2mm thk PGI sheet. (d) Submersible pump electric driven single phase 230 volts, 50 Hz of suitable discharge and head but motor capacity not less than 18 watt. Make : Khaitan/Crompton or equivalent make. (e) Service cord of 3 Core copper wire 1.5 Sqmm with plug top 5 Amp length not less than 2 metres. (f) Electronic fan dimmer 1000 watts AC 230 Volt for controlling the fan speed. (g) Complete electric wiring of desert coolers as required to operate fan and pump along with 5 Amp switches . (h) Make of cooler fan motor: Khaitan/ Havells/Crompton Greaves/Marathon/Almonard (j) Make of PGI sheet. Tata/Jindal/National

M&L painting enamel white paint by spraying on ceiling fans/exhaust fan complete in situ with synthetic enamel paint by sprying including filling cavities withfine finishing surface by filler one coat after removing/cleaning all dust/dert etc including taking down/ refixing complete all as specfied and directed Note marking/numbering with MES No/Qtr no included in item rates, no extra payment shoulld be mai for marking/numbering.

M&L for attending complaint of ceiling fan/exhaust fan/air circulator/ cabin fan such as hanging/dismantling/loose connection etc complete all as specified and directed

Supply and fixing replacement of capacitor 4 MFD suitable for any make, type & sweep ceiling fan, exhaust fan, cabin fan & pedestal fan complete all as specified and directed

Supply and fixing capacitor of 2.5 MFD of ISI marked.complete all as specified and directed

M & L for rewinding of ceiling fans 1200/1400mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc and drying the winding , complete as reassembling taking down and refixing at site and shifting/transporting to wksp including testing complete all as specified and directed Note:-(i) 24 month waranty period shall given by the dealer/contractor after repair . (ii) Contractor shall make the suitable arrangement at Darjipura (MES) premises to replacing of accessories, testing upto the satisfactory level in front of concerned E/M in charge without fail. (iii) Replacement of bearing/bush will be measured and paid separately under respective item of BOQ

M & L for rewinding of Exhaust fan 300 mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of of heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc complete all as specified and directed Note :- (i) 24 month waranty period shall given by the dealer/contractor after repair, complete as reassembling taking down and refixing at site and shifting/transporting to wksp including testing complete. (iii) Replacement of bearing/bush will be measured and paid separately under respective item of BOQ

M & L for rewinding Exhaust fan 450 mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of of heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc 24 month waranty period shall given by the dealer/contractor after repair, complete as reassembling taking down and refixing at site and shifting/transporting to wksp including testing complete all as specified and directed Note:-(i) 24 month waranty period shall given by the dealer/contractor after repair . (ii) Contractor shall make the suitable arrangement at Darjipura (MES) premises to replacing of accessories, testing upto the satisfactory level in front of concerned E/M in charge without fail. (iii) Replacement of bearing/bush will be measured and paid separately under respective item of BOQ

M & L rewinding for Cabin fan/wall mouted 400 mm sweep/PVC Exhaust fan, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of of heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc 24 month waranty period shall given by the dealer/contractor after repair, complete as reassembling taking down and refixing at site and shifting/transporting to wksp including testing complete all as specified and directed Note:-(i) 24 month waranty period shall given by the dealer/contractor after repair . (ii) Contractor shall make the suitable arrangement at Darjipura (MES) premises to replacing of accessories, testing upto the satisfactory level in front of concerned E/M in charge without fail. (iii) Replacement of bearing/bush will be measured and paid separately under respective item of BOQ

M & L for rewinding of air circulator 600 mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size ofof heavy grade (ISI mark ) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc 24month waranty period shall given by the dealer/contractor after repair, complete as reassembling taking down and refixing at site and shifting/transporting to wksp including testing complete all as specified and directed Note:-(i) 24 month waranty period shall given by the dealer/contractor after repair . (ii) Contractor shall make the suitable arrangement at Darjipura (MES) premises to replacing of accessories, testing upto the satisfactory level in front of concerned E/M in charge without fail. (iii) Replacement of bearing/bush will be measured and paid separately under respective item of BOQ

S & F MS clamps (Standard size as per site of DJP) with rubber real with MS nut, bolts, check nut & split pin complete all as specified and directed

Supply and fix anti sucide fan rod (12") with brass clamp including rubber nuts bolt cotter pin white, MS pipe zinc plated, 19 mm OD, 1.8 + /- 0.05 mm spring set grade 3 carbon steel material zinc plated , MSME tested for, performance test and opening at impact load of 22 kgs + and spring 'hidden in the pipe' will expand to about 1 mtr or more, complete all as speified and directed Note :- rate of clamp included in item rate Make :- Gold life or any other equivalent as approved by GE

Supply only of fan bearing 6201/6202/ as required for ceiling fan of any capacity any size complete all as specified and directed Note: Replacement of bearing to be carried out at power house at AFS Darjipura only exceptional case where lathe work is required then only fan to be taken at workshop.

Supply only of bearing/bush of any suitable size for existing exhaust fan/cabin fan/air circulator complete all as specified and directed Note: Replacement of bearing to be carried out at power house at AFS Darjipura only exceptional case where lathe work is required then only fan to be taken at workshop.

Dismentling and taking out ceiling fans (1200/1400mm)/ Exhaust fan (up to 450mm sweep)/wall mount fan any size/ any capacity , washed /cleaned the derts sludge from the surface/inner vessel with suitable clening agent, and serviceing the same by using suitable lubricant such as grease/oil, replacement of u/s beaing/bush etc and reassembled the applices as original , test and refixing at site complete all as specified and directed . Note: (i) U/S parts should be mesured and paid seperately . (ii) Bearing /bush will be measured and paid seperatly.

Supply only 23/.0076 sq mm 2 core flexible copper cable for maintenance of geyser, and cooling appliances complete all as specified and directed

Supply only exahust fan blade 300mm sweep with locking nut complete all as specified and directed

Supply and installation of new collecter including taking down of old collecter of solar water heater complete all as specified and directed

Supply and installation of HDPE Cold water tank of 500 ltr capacity including taking down of old tank complete all as specified and directed

S&F collecter stand front with grouting of solar water heater complete all as specified and directed

S&F collecter stand rear with grouting of solar water heater complete all as specified and directed

S&F hot and cold water structure with grouting of solar water heater complete all as specified and directed

M&L for repairing/ servecing /welding/ brazzing/ reinsulating and cladding of hot water tank complete all as specified and directed

M&L for repairing/ servecing/ welding/ brazzing/ reinsulating/descaling including replacement of flanges of coleecter complete all as specified and directed

Supply and fix collecter glass (toughned) of solar water heater complete all as specified and directed

Supply and lay in repair CPVC pipe 1" dia including elbow, union, socket,bend etc complete all as specified and directed

Supply and lay in repair CPVC pipe 1.5" dia including elbow, union, socket,bend etc complete all as specified and directed

Supply and fix hosepipe (hot water application) between hot water tank and collecters with clamp and end connection complete all as specified and directed

Supply and fix hosepipe (hot water application) between hot water tank and collecters with clamp complete all as specified and directed

Supply and fix in repair NRV 1" dia complete all as specified and directed

Supply and fix in repair NRV 1.5" dia complete all as specified and directed

Supply and fix in repair union 1" dia complete all as specified and directed

Supply and fix in repair union 1.5" dia complete all as specified and directed

Supply, intalltion and testing of Electrical backup with wiring and timer complete all as specified and directed.

Supply& fix ceiling fan blade suitable for 1200mm/1400 mm sweep ceiling fan , heavy duty, metelic, paint finish (white) complete all as specified and directed.

Supply & fix Exhaust fan louvers 300mm/450mm, heavy duty, paint finish complete all as specified and directed.

Labour only for brazing/gas welding with copper welding rod in joint of copper earth strip joint size 20mmx3mm complete all as specified and directed

LAXMI CORPORATION