Construction of ITI Building at Sandhole District Mandi (H.P.)

Amount

Cutting work in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of serviceable material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-serviceable material to racquired width of the road or on approved dumping sites by Engineer -In- Charge through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incedintals. A recovery of useful stone for 391.76 cum (Three hundred ninty one decimal seven six ) cubic metre @ Rs. 170/- (Rupees one hundred seventy only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in all kind of classification of soil such as pick work, jumper work, pick jumper blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth and disposal all surplus excavated as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete in all floors in all heights including entire carriage of material with in all leads and lifts including other incidentals as per drawings and technical specifications and the direction of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying brick bat filling in foundation , plinth including carriage of material upto all leads and lifts and as per direction by the Engineer incharge including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etectera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and as per direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

In foundation,footings bases of columns etctera and mass concrete

In flat surfaces such as soffits of suspended floors,roofs,landing and the like .

Vertical surfaces such as walls (any thickness) partition and the like including attached pilasters, buttresses plinth and string courses and the like .

In columns, pillars posts and struts square rectangular or polygonal in plan.

Stair Case with sloping or stepped soffits excluding landing beams, cantilivers, girders and lintels.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching below supporting cantilevers girders breasumers and lintels upto any depth /height

In edges of slabs and breaks in floors and walls in any floors width/ height.

Providing and laying mechanically mixed cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification including curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying mechnical mixed and and vibrated design mix cement concrete of grade M20 ( M- Twenty) to obtained minium crushing strength 20 of N/mm2 (Twenty) Newton per millimetres Square using graded crushed stone aggregate 20mm (twenty ) millimetres nominal size with minium cement contents 340 (Three hundred forty Killogramme) per Cubic metres in wall (any thickness but not less than 0.10 metre (Zero point one) metre attached pilasters, buttresses, plinth and string courses etc. curing complete excluding the cost of form work and reinforcement for RCC work upto all floor levels all heights/ depth including entire carriage of material with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying mechnical mixed and vibrated design mix cement concrete of grade M25 ( M- Twenty five) to obtained minium crushing strength 25 Nmm2 (Twenty five) Newton per millimetres Square with minium cement contents of 400 Kg (Four hundred Killogramme) per Cubic metres curing complete excluding the cost of form work and reinforced concrete for RCC work upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

In foundations and footings, bases of columns and the like and mass concrete etcetra.

In suspended floor, roofs landing and shelves and their support, balconies, beams, girders, bressumers and cantilivers .

In columns pillars, posts and struts.

In stair cases(except spiral stair cases) excluding landing but including preparing of top the surface and finishing of nosing .

In wall (any thickness but not less than 0.10 Zero point one zero thickness) attached plasters, buttresses, plinth and string courses etcertera.

Providing and laying tor steel made of TATA reinforcement for reinforcemed cement concrete work including bending, binding straightning and placing in position complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing in RCC work Smooth finishing of the exposed surface with cement mortar 1:3 ( one cement :three Sand) including carriage of material up to all leads and lifts and as per direction of Engineer in charge The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75kg (Two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including entire carriage of material with in all leads and lifts and as per direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Brick work Second class using common burnt clay building bricks in Super structure above plinth level in cement mortar 1:6 (one cement : six coarse sand) curing complete upto all floor levels /heights including entire carriage of material with in all leads and lifts as per the direction by the Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Brick work ( Second class) using common burent clay building bricks in foundation and plinth in cement mortar 1:6 (one cement : six coarse sand) curing complete in all heights including entire carriage of material with in all leads and lifts and the direction by the Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Half brick masonry in common burnt clay building bricks in Cement Mortar 1:3 (one cement: three sand) Ist Class Bricks with hoop iron curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lifts as per the direction by the Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (1cement: 4 sand) Second Class Bricks with hoop iron curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction by the Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Stone /Boulder filling under floors dry hand packed including entire carriage of material with in all leads and lifts as per the direction by the Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 35(Thirty five) millimetres thick flush door shutters core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains of cross band and face vaneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters including black enamelled M.S. butt hinges including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction by the Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Factory made flush door shutters made of Action Tisa of green ply covered with 3 (Three) millimetres Plastic/ Aluminiun sheet upto 90(Ninety) Centimetres height from inside only including black enamelled M.S. butt hinges including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing 40x3 (Forty into three millimetres) flat iron hold fast 40(Forty) centrimetres Long including fixing to frame with 10(Ten) millimetres diameter bolts and nuts with wooden plugs and embeding in cement concrete block 30x10x15 ( Thirty into ten into fifteen) centimetres. 1:3:6 ( one cement : three sand: six graded/crushed stone aggregate 20(twenty millimetres) nominal size including entire carriage of material with in all leads and lifts and the direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetera complete including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

250×16mm (Two hundred fifty into sixteen millimetre) nominal size.

300×16mm (Three hundred into sixteen millimetre) nominal size.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra. complete. etcetra complete including entire carriage of material with in all leads and lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

200x10mm (Two hundred into ten millimetres) nominal size.

150x10mm( One hundred fifty into ten millimetres) nominal size

Providing and fixing 100( One hundred) millimetres bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete, including entire carriage of material with in all leads , lifts and technical specifications as per the direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 150(One hundred fifty) millimetres bright finsihed hard drawn hooks eyes brass including entire carriage of material with in all leads, lifts and technical specifications as per the direction bythe Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 25 twenty five) millimetres diameter curtain rods with brackets, plugs etcetra. where ever required in first class deodar wood including entire carriage of material with in all leads, lifts and technical specifications as per the direction bythe Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing to position eaves board 200 into 25( Two hundred into twenty five) millimetres thick including fixing in position First class deodar wood made to design including entire carriage of material with in all leads and lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Mild Steel grills made of SAIL, TISCO, JINDAK make steel of required pattern on wooden / steel frames of windows etcetera with mild steel flats square or round bars with round headed bolts and nuts or by screws/welding in plain grill as per the directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 12 (Twelve)millimetres thick prelaminated board both side bwp phenol bonded made of Novapan, Kitply, Action Tesa, Green.exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40mm (Forty)millimetres thick frame as per the directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Garsa stone 12 (Twelve)millimetres thick. cladding on R.C.C. surface side as on faces of Arch masonry walls etcetra on 12(Twelve) millimetres thick with cement plaster 1:3(one cement: Three sand) and jointed with cement slurry including scaffolding etcetra, curing complete as per the directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Automatic Hydraulically compressed and polished Terrazzo Tiles 300 X 300 X 25 (Three hundred into three hundred into twenty five) made of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnson in floors, treads of steps and landings. In 70%(seventy percent) white & 30% ( Thirty percent) grey cement the ratio of chips shall be 55% white chips, 15%( Fifteen percent) each maroon, yellow and dark green having chips sizes O,B, 2B; on a bed of 25( Twenty five) Millimetres average thickness of cement mortar 1:6 ( One cement :six sand) jointed with neat cement slurry with pigment to make the shade of tiles and curing complete including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Automatic Hydraulically compressed and polished Terrazzo Tiles 300 X 300 X 225 (Three hundred into three hundred into twenty five) made of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnson in skirting and risers of steps not exceeding 30 cm in height. In 70% (Seventy percent) white & 30% (Thirty percent) grey cement the ratio of chips shall be 55%( fiftyfive percent) white chips, 15%( fifteen percent) each maroon, yellow and dark green having chips sizes O,B, 2B; and bed of 25 mm (Twenty five) millimetres avrege thickness of cement mortor 1:6( One cement: six sand) jointed with neat cement slurry with pigment to make the shade of tiles and curing complete including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying white Glazed tiles 300X 450 (Three hundred into four hundred fifty) millimetres size 6 mm to 8 mm (Six to eight millimetres) thick in skirting risers of steps and dado 12(Twelve)millimetres thick cement mortar 1:3 (One cement :Three sand) and jointed with cement slurry of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnson make curing complete including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetres) thick kota stone 55x55cm (Fifty five into fifty five centimetres) minimum size flooring mirror polished finshed of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 ( One cement : four coarse sand) laid over and joints with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Kota stone slab 25mm (Twenty five millimetres) thick in risers of steps skirting dado and pillars laid on 12mm (Twelve millimetres) ( average ) thick in cement mortar 1:3 (One cement : three coarse sand) and jointed with grey cement slurry mixed with pigment to match of the shade of the slab including rubbing, polishing and mirror finish complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying non slippery ceremic tiles 5.5 (Five point five) millimetres .thick in flooring 300 x300 Three hundred into Three hundred) Millimetres of Kajaria, NITCO, Somany, Orient, RAK, Johnson & Johnson on a bed of 12 (Twelve) millimetres . thick cement mortar 1:3(One cement: Three sand) finished with flush pointing in white cement,upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Baroda green marble work (table rubbed and polished) in flooring 20 (twenty)millimetres. thick base in cement mortar 1:3(one cement: three sand) including jointing with cement mortar 1:2(One white cement: Two marble dust) with an admixure of pigment to match the shade of the marble including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 2(Two) Millimetres thick heavy duty homogeuis PVC antistatic venyle Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying red sand stone slab flooring 40mm average thick on 20( Twenty) Millimetres average thick base of cement mortar 1:4 One cement : Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c rubbing and granite polish finish complete, including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying 80(eighty millimetres) thick heavy duty precast cement concrete inter locking paver blocks made of NTC vibro compacted upto M-50 (fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25 (Twenty) millimetes thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and curring complete polishing complete (Sub base concrete floor to be paid for sepertaly ) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet made of TATA,Durashine in roofing with hot dipped matallic Zinc coated sheet with the top coat of regular modified polyster (RMP) organic coating of of 20 (twenty) microns over 5 (five) microns to primar coating back coat of polister of 5 microns primer coating including fixing with pre painted iron J or L hooks, bolts and nuts 6mm (six milimeters) dia meter with prepainted limpet and rubber washer complete with all accessories as equired as per the direction of Engineer-in Charge in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets made of TATA / Durashine Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required including entire carriage of material with in all leads lifts in all heights and technical specifications and direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 15(Fifteen) millimetres wide 45(forty five) millimetres overall semicircular plain GI sheet gutter with iron brackets 40X 3(forty into three) millimetres size bolts and nutts and washers etcetra including making necessary connections with rain water pipe complete as per design in 0.63 mm ( Zero point six three millilmetres thick sheet ,including entire carriage of material with in all leads lifts in all heights and technical specifications and direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA/Durashine make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction by the Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads lifts in all heights and technical specifications and direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-Plast)Supreme, Deplast, AKG, Finolex, Prince, Kisan, SFMC, rain water pipes of working pressure not less than 4.5(four point five)kilogram per square centimetre including entire carriage of material with in all leads lifts in all heights and technical specifications and direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

150( one hundred fifty) millimetres dia

100( one hundred fifty) millimetres dia

Providing and fixing on wall faces PVC (D-Plast) Finolex, Prince, Kissan, SFMC, Diplast accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 150 (one hundred fifty )millimetres dia including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-Plast) Supreme, AKG, Finolex, Prince, Kissan, SFMC, DIPLAST accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain shoe 150 (One hundred fifty) millimetres dia including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Steel work welded in built up sections, made of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura). trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In trusses and trussed purlins in building complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Steel work welded in built up sections made of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura). trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level heights In grating, framed guard bars ladders, railing brackets and similar works complete in all respect including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing standared steel section made of TATA door, window, clerestory window frame manufactured from ISMC Channel section 75X 40 (Seventy five into forty) Millimetres with MS flat 75x4 (Seventy five into four) Millimetres in combination including hinges Jamb, beed, lungs, with with split end tails to each jambs including steel butt hinges 2.5(Two point five) Millimetres thick with provision for locking arrangement and shock observer as specfied and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing angle iron of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog made cup board frames manufactured from M.S.Angle iron section 35X35X4 (Thirty five into thirty five onto four) Millimetres thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 50 x40 (Fifty into forty )Millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5(two point five) Millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing angle iron of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog made cupboard frames manufactured from M.S.Angle iron section 25X25X5 (Twenty five into twenty five onto five) Millimetres thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 (Twenty five into twenty five )Millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5(two point five) Millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing standared steel sectionof San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog made window, clerestory window frame manufactured from ISMC Channel section 75X 40 (Seventy five into forty) Millimetres with MS flat 75x4(Seventy five into four) Millimetres in combination including hinges Jamb, beed, lungs, with split end tails to each jambs including steel butt hinges 2.5(Two point five) Millimetres thick with provision for locking arrangement and shock observer as specfied and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog made for window made of standerd rolled steel sections ,joints mitred and welded with 16x3.15(Sixteen into three point one five)millimetres lugs 10 (Ten) centimetres .long embedded in cement concrete blocks 15 x10x10(Fifteen into ten into ten)centimetres size of 1:3:6(one cement:three sand: six graded stone aggregate 20 (twenty)millimetres nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, Horzintal and vertical Sash bars of angle iron 25x25x3 ( Twenty five into twenty five into three)millimetres including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing fixed steel shutters for window made of standerd rolled steel sections ,joints mitred and welded with 16x3.15 (sixteen into three point one five) lugs 10 (Ten) centimetres .long embedded in cement concrete blocks 15 cmx10cmx10cm size of (one cement:three sand: six graded stone aggregate 20 (twenty)millimetres nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes 4 (Four)millimetres thick with glazing clips and special metal sesh putty Horzintal and vertical Sash bars of angle iron 25x25x3 ( Twenty five into twenty five into three)millimetres including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing moulded hand rail of M.S. hollow pipe made of TATA, Jindal (Hisar) Parkash steel tubes, Bhushan industries 50 (fifty) millimetres dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying priming coat on new steel and other metal based of ICI, Nerolac, Berger, Asian Paints, Shalimar make surfaces after and including preparing the surface by thoroully cleaning oil grees all dirt, dust and other foreign matter sand papering and knotting ready mixed paint brushing steel primer pant red oxide, xink oxide complete up to all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enemal paint other than white made of (ASAIN/NEROLAC )ICI, Nerolac, Berger, Asian Paints, Shalimar. up to all floor slevels complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces of ICI, Nerolac, Berger, Asian Paints, Shalimar make after and including preparing the surface throughly cleaning oil grease, dirt ,dust and other foreign matter and sand papering and knotting with ready mixed paint brushing primer pink for enemal upto all floor levels make complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying spirit or oil stain and colour of approved colour of ICI, Nerolac, Berger, Asian Paints, Shalimar on wood and wood based surfaces to given an even surfaces including cleaning the surfaces of all dirt, dust and sand papering so as to produce a smooth dry and matt surface up to all floor levels including stopping & knotting, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying one coat of acrylic primer of Nerolac, Berger, Asian Paints, Shalimar on plastered wall surfaces (One coat) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetra including sand paper smooth complete, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying one coat of acrylic washable emulation of Nerolac, Berger, Asian Paints, Shalimar on plastered wall surfaces (Two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying Birla / JK white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drooping, dust, loose materials and other foreign matter sand papered smooth to give fine finish to the surface complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apex Ultima, Asian Paints ICI Dulux Gloss, Nerolac,Burger (Shalimar Apcolite Gloss & Shalimar manufacture) or its equivalents on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying two coats of synthetic enamel paint upto the height of 1.4 (one point four) Metre of approved shade of (Apex Ultima, Asian Paints ICI Dulux Gloss, Nerolac, Burger (luxol High Gloss, Premimum Apcolite Gloss & Shalimar) on plastered wall surfaces to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etcetra including sand paper smooth complete, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and applying of Birla white level plast over prepared surface including grinding, Cheiseling Pre-wetting, cleaning with wire brush to remove dirt,dust , grease, oil etcetra level plast to be mixed thoroughly with mechnical stirrer/ manually by adding 23 to 26% (Twnenty three to twenty six) percent clean portable water and waiting for 5 to 10 (Five to ten) minute before application coat thicknesss to be between 3 to 12(Three to Twelve)millimetres after cleaning the surface patch coat of level plast to be applied to ceiling to fill all pore honey combing are as using hard trowel and finishing the same with alluminium bottom. At the time of application applicator should wear hand gloves while using level plast. Providing and applying two coats of Birla white wall care putty with a maximum thickness of 1 to 1.5 (One to one point five)millimetres over base coat of level plast including pre-wetting, cleaning of blade marks, removal of loose particle etcetra. WCP to be mixed thoroughly with mechanical stirrer/ manually by addding 35 to 40%(Thirty five to forty Percent) of clean potable water and waiting for 5 to 10 (Five to ten)minutes before application. Second coat to be applied after 2 to 3 (Two to three) hours of complete drying of 1st coat and after rubbing with emery paper of size 500 (five hundred) and above to remove the putty blade marks including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level / heights and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor leve/ heights and curing complete ncluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Distempering two coats with oil bound washable distemper of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture of ASAIN/NEROLAC after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level in all heightsncluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Armstrong ceiling tiles 600 x 600 x 70( Six hundered into six hundered into seventy) millimetre thick. Over main beam and T -Section frame work including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Everest Designer Fiber Board ceiling tiles of size 600x600 (Six hundred into six hundred) millimetres over powder coated metal sheet section frame work 600 (six hundred) millimetres centre to centre grid suspended from roof, including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 6 (six)millimetres thick Fibre cement board ceiling of Everest or its equivalent with angle iron 25x25 (twenty five into twenty five) millimeres and T Sections 25x25(twenty five into twenty five) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimeters) nominal size well rammed and consolidated and grouted with fine coarse sand including preparation of ground complete in all respect including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Making plinth protection with flag stone flooring 40mm (Forty millimeters) thick over a bed of 15 ( Fifteen) centimetres rammed earth cement pointing in cement mortor 1:3 (One cement : three sand ) in proper shape including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing Godrej interoi Almirah ( Glossy) Finish, Prince Gray) of size Length (48.6 cm) (forty eight point six) centimeter Width (91.6 cm) ( ninety one point six) centimeters height (198 cm) (one hundred ninety eight) centimeter made in CRCA Steel including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 12 (Twelve) millimetres thick Green Chalk board with superior quality framing specially anodized aluminium profil 20x15 (twenty into fifteen) millimetres with corners of black plastic shall be provided. The board surface shall be non porus cramic particals on the top green surface for smooth writing with chalk over 11 (Eleven) millimetres thick partical board which shall have backing materials of galvanised sheeth 0.28 (Zero point two eight) millimetres thick approx. thick board shall be fixed on the wall with specially designed "J" clump with the help of nylon sleevs and screws as per site requirements including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet squatting pan (Indian Type W.C. pan) size 580 mm (Five hundred eighty millimetres) No 2004 (Earth Work, bed concrete foot rest and trap to be measured and paid for separately) (Orrissa Pattern) in white shade of Hindware/Parryware /CERA Sanitary Neycer ware make including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 10(Ten) litres capacity PTMT Coloured white automatic flushing cisternof Parryware, Hindware Sanitaryware, Neycer, Cera make with fittings with a pair of Mild steel brackets with fittings such as lead valve syphon 15 (Fifteen) millimetres nominal size PVC valve with potythine float, with push butten union and couplings for connection with inlet and outlet, over flow pipe 40mm (forty millimetres) dia CP Flush bend a pair of PVC MS bracket complete including cutting holes in walls and making good the same and connecting the flush bend with cystren and closet (over flow pipe to be measured and paid for separately)including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing vitreous China wash down water closet (European type W.C. pan ) with integral P or S strap including jointing the trap with soil pipe in cement mortar 1:1 ( One cement : One coarse sand) seat and cover to be measured and paid for separately or ordinary closet ( Hindware/Parryware /CERA/ Sanitary ware make ) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing wash basin of Size 550 x 400(Five hundred fifty into four hundred) millimetres including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 15 ( Fifteen) millimetres nominal size Basin Mixer with 450 (Four hundred fifty) millimetres with connection pipe including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing stainless steel sink of size 460X560X229 (Four hundred sixty into five hundred sixty into two hundred twenty nine) (NO 1022-XD made of Prayag Polymer or equivalent) including carriage of materials up to all leads and lifts and as per direction of Engineer including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 15 ( Fifteen) millimetres nominal size Mixer with top/bottom swinging with 450 (Four hundred fifty) millimetres connection pipeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing CP brass chain 50 ( fifty) millimetres long and rubber plug for wash basin and sink 32mm (Thirty two millimetres diaincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing viterious China bowl pattern flat back Urinal with Auto cistern of Parryware, Hindware Sanitaryware, Neycer, Cera (NO. 60001 ) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing division plate for Urinal of Hindware (NO. 61001 ) or equivalent including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing bottel trap for wash Basin and Sink of make Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko.with fully casted body (with integral partition ) 32(Thirty two) millimetres with 190 (One hundred ninety )millimetres and 125( One hundred twenty five) millimetres long connecting pipes and wall flang Cera make Cat. No.F 8060101,150 (One hundred fifty) millimetres including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing C.P.Brass Towell rail of Jaquar, Jal, ESS ESS,Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. make with C.P. Brass brackets fixed to wooden plugs with C.P. Brass 600 x20 ( six hundred into twenty) millimetres including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing CP brass liquid soap dispenser of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. make with CP brass brackets fixed to wooden cleats with CP brass screwsincluding entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 600 x 450 ( Six hundred into four hundred fifty) millimetres Ready made mirror of Atul, Modi Guard, Golden Fish glass mounted on wodden plugs with C.P. brass screw including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing CP brass soap dish ofKingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. make with CP brass brackets fixed to wooden cleats with CP brass screwsincluding entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing C.P. Paper Holder of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko. make including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing CP brass bib tap with capstan head 15(Fifteen) millimetres dia of Zoloto, Sant, L&K, Leader make with wall flange and areator including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing P.V.C. waste pipe of Finolex/ Kitech make for wash basin and sink including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providind and fixing 15(Fifteen) millimetres dia Pillar cock of of Zoloto, Sant, L&K, Leader make make with aerator including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providind and fixing 15(Fifteen) millimetres dia stop cock of of Zoloto, Sant, L&K, Leader make make with aerator including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 100 (one hundred ) millimetres dia C.P. Grating of Kingston, Gem, Parko, Techno, JAL, ESS ESS. JAQUAR, Seiko make including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing PVC connections pipe with brass unions 45 (forty five) centimetres length 15 ( fifteen) millimetres nominal bore of Finolex/ Kitech make including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 15 (Fifteen) millimetres nominal dia M.I. Union (ISI Mark) including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing brass full way valve of Zoloto, Sant, L&K, Leader make with wheel including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15(fifteen) millimetres nominal bore

20 (twenty) millimetres nominal bore

25 (Twenty five ) millimetres nominal bore

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size) inside plastering 15mm (Fifteen millimeters) thick cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimetre nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 500mm (Eight hundred into eight hundred into five hundred)millimeres deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramm) with 200mm (Two hundred millimeters) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three sand) including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size) inside plastering 15mm (Fifteen millimeters) thick cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 1000mm (Eight hundred into eight hundred intoone thousand)millimeres deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramm) with 200mm (Two hundred millimeters) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three sand) including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Constructing masonry Chamber 450 x 610x 450 (four hundredfifty into six hundred ten into four hundred fifty)millimetrers size for under ground U.I inspection chamber and bends with comon burnt clay building bricks in cement mortar 1:5 (One cement : Five sand) for sluice valve, with C.I. cover with frame 355mm x 610( Three hundred fifty five into six hundred ten) millimetres internal dimensions total weight of cover with frame to be not less than 38 (Thirty eight) Killogramme RCC top slab with 1:2:4 (One cement: two sand : four crushed Aggregate ) mix foundtion concrete with 1:5:10(One cement: five sand : ten crushed Aggregate ) inside plaster 15 (Fifteen) millimetres thick with cement mortar 1:3( One cement : Three Sand) finished smooth with floating coat of neat cement onwalls and wet concrete etcetra complete including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium Grade) tube fitting and clamps as per IS code including making good the wall ceiling and floor including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

15mm ( Fifteen) millimetres nominal bore.

20 (twenty) millimetres nominal bore.

25 (Twenty five ) millimetres nominal bore.

Providing and fixing 6.00 (six ) Killograme PVC Poly plast sewerage pipe of Supreme Finolex make of working pressure not less than 4.5 ( Four point five) killog ramme per square centimetre confirming to IS 13592 including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

75( Seventy FIve)Millimetres nominal dia

110( One Hundred Ten)Millimetres nominal dia

150( One Hundred Fifty)Millimetres nominal dia

Providing and fixing high pressure PVC fitting & accessories of Finolex/Kitech make including fixing with approved adhesive etcetra Complete including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Plain bend of

75( Seventy five) millmetres nominal dia

110( One hundred ten)Millimetres nominal dia

150( One hundred fifty) Millimetres nominal dia

Single equal junction of

75( Seventy five) millmetres nominal dia

110( One hundred ten)Millimetres nominal dia

PVC Collar of

75( Seventy five) millmetres nominal dia

110( One hundred ten) Millimetres nominal dia

PVC Clamps of

75( Seventy five) millmetres nominal dia

110( One hundred ten) Millimetres nominal dia

PVC Cowl of

75( Seventy five) millmetres nominal dia

110( One hundred ten)Millimetres nominal dia

Door bend of

75( Seventy five) millmetres nominal dia

110( One hundred ten)Millimetres nominal dia

Door Tee of

75( Seventy five) millmetres nominal dia

110( One hundred ten) Millimetres nominal dia

Providing and fixing 110x90 (One hundred ten into ninty) nominal diameter.PVC floor trap made of finlox/Kitech make of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing, placing and fixing 1000 (One thousand) liter capacity polyethylene water storage tank IS :12701 marked, made of Sintex weight not less than 64 ( sixty four) with cover and suitable locking arrangement, and making necessary holes for inlet, outlet and overflow pipe, and with fitting complete, UV protected, rounded corneer maked with month and year of manufacture extra ribs on top and horizontaly for greater strength) and as per specification, drawings including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 1216 (16 mm O.D.Pipe) Polytheline-Aluminium-Polythelene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black conforming to IS-15450-2004 water supply including clamp at one metre spacing, cutting,fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Supplying and fixing cast iron cover with other frame for Manhole cast iron cover and frame 460x610mm (Four hundred sixty into six hundred ten millimeters) (Light duty single seal pattern-I) internal dimensions total weight of cover and frame to be not less than 23kgs (Twenty three kilogramme) including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 150mm ( One hundred fifty millimetres ) PVC sewerage pipe of Supreme Finolex make of working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 including filling the joints with approved adhesive complete including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing PVC cowl of Finlex made100 mm ( hundred millimetres) dia including entire carriage of material with in all leads lifts and technical specifications as per direction of Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

M/s Bhagwati Construction Co.