Annual Plan-ANNUAL PLAN KUMBALA GP 2025-26 PR NO 67/26 BAJPE KODUVA ROAD IMPROVEMENT-IN WARD 6-General Civil Work

Amount

CONCRETE ROAD

3.15.2:Compacting Original Ground<br> (ii) Compacting original ground supporting subgrade<br> Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.

4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. <br>(ii) Using Gravel mix soil.

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

3.4:Construction of Embankment with Material Obtained from Borrow Pits <br> Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

OD183968/2025-2026:Engraving letters in hard stone.

OD199825/2025-2026:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished granite less than 0.5 sqm area, at road sides, walls etc. locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch tips, including rubbing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.

HASSAN BASHEER (BID ID -2315976)

Bidder Name

Mohammed Nuhman

HASSAN BASHEER