WB/37/BDO/MAL/2025-26/05

Earth work in excavation of foundation of structures aber drawing and technical specification including setting out benches levelling dressing and ramming the bottom and backfiling with approved material complete as pendirection of removing spreading or stacking of spots within a lead of 150m as directed and including trimming the sides of the the Engineer-in-Charge a) upto 3 m depth iv) Without pumping out water and shoring a) Depth upto 3m without pumping out water and shoring as required

Earth work in filling in foundation benches with earth in layers not exceeding 15cm including watering and ramming lay by layer complete with earth obtained from excavation of foundation or fresh excavation of land arranged by Departm with in a lead of 50m

Providing and laying Design Mix M-15 concrete for Plain/Reinforced Cement Concrete in any part of foundation of bric Iculvert with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary cost cuning with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in charge, cost of quality control, sampling, testing etc all complete but excluding cost of formwork and reinforcement works A) PCC Grade M-15 With 37.5 mm size well graded shingles using concrete mixer, height upto 5m

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ ply board/ steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross-drain etc. the rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. b) Where staging is not required.

Providing and fiting Concrete Sign Board as per IRC specification of size 900x750x37 mm thick made with RCC with N.B. variety stone chips reinforced with duble layer IRC febric (75x75 mm mesh) and fixed with necessary bolts on two RC precast posts 100mm x150 mm of height 2.65 m of which top 750 mm is of 100 x13 mm and 1. above GL & 0.75 m below GL including digging hole, repacking the same with cement concrete 1:3:6 with local chips etc complete including painting two coats on noth faces lettering sign marks etc. as per direction of Engin

Add:- GST @ 18%

Add:- Labour Welfare Cess @ 1%