GE/CHD/T-38/2026-27 PROVISION OF TOILET BLOCK, DRAINAGE SYSTEM AND RAMP AT NAHAN UNDER GE CHANDIGARH

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe 100 mm including disposal of unservicable rubbish outside Cantt area complete all as specified and directed by Engineer in Charge.

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth,1.5 mtr in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 mtr and lift upto 1.5mtr, as directed by Engineer-in charge complete, all as specified.

Excavation in trenches in any type of soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth; for foundation or for shafts, wells, cesspits, manholes, pierholes, etc. not exceeding 10 sq. m on plan and getting out complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each,excavated soil in soft/loose soil, complete, all as specified and directed by Engineer-in-Charge.

Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and directed by Engineer-in-Charge.

M&L for excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified.

Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span bed blocks,coping and the like complete all as specified and directed by Engineer-in-Charge..

Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in foundations including rafts,footings,foundation beams,plinth beams,bases for columns,basement slabs,under reamed piles and mass concrete and the like complete all as specified and directed by Engineer-in-Charge.

Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in Columns, pillars, piers, posts and struts and the like; any thickness; above top of footings; including attached pilasters and buttresses and the like complete all as specified and directed by Engineer-in-Charge.

Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.