MIRPA 2020-21- Expansion of Pipe line to Ayacut area of Peelarmuzhy LIS in Kodassery Panchayath- Phase II

Amount

2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

od16520/2020_2021/IA : Supplying 200 mm dia PVC pipes with working pressure of 6 Kg /cm? with ISI specification including pipes for hydraulic pressure testing at laboratory including specials such as bent, elbow , tees and reducers (6 Kg/ Cm2) as per site condition including cost taxes and conveyance of all marterals , labour charges and all other incidental charges etc. complete as per directed by departmental officers at site ( preliminary pressure test for PVC pipes supplied should be done in the approved laboratory at contractors own expense)

od16524/2020_2021/IA : Supplying 110 mm mm dia PVC pipes with working pressure of 6 Kg /cm? with ISI specification including pipes for hydraulic pressure testing at laboratory including specials such as bent, elbow , tees and reducers (6 Kg/ Cm2) as per site condition including cost taxes and conveyance of all marterals , labour charges and all other incidental charges etc. complete as per directed by departmental officers at site ( preliminary pressure test for PVC pipes supplied should be done in the approved laboratory at contractors own expense)

2.13.3.2 : Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth. including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m:Hard rock (blasting prohibited)Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

od16514/2020_2021/IA : Laying and joining PVC pipes with required specials such as couplings, bends, tee, reducers, etc. with required quantity of cement solvent, including the cost for conveying to trenches, laying, laying, joining, testing, washing etc

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

od16515/2020_2021/IA : supplying and fixing ISI marked best quality 110mm dia PVC ball valve with necessary fittings including cost & conveyanceof all materials and labour charges for fixing and all other incidental charges etc.complete as directed by the departmental officers at site

od16516/2020_2021/IA : supplying and fixing 200 mm cast iron wheel valve including cost taxes and conveyance of all materials, labor charges etc. complete as directed by the departmental officers at site

od16517/2020_2021/IA : MS pipes 110mm- Manufacturing supplying & fitting 110mm Dia MS pipe various length with shell thickness 6mm including painting with two coats of red oxide primer, laying the same to line and levels as directed by the departmental officers at site .

od16518/2020_2021/IA : Supplying, laying, joining ISI marked best quality 110mm dia PVC (6 kg/cm2) tale piece

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

od16519/2020_2021/IA : MS Flange for 110mm pipe - Manufacturing supplying & fitting 110mm dia MS flange having shell thickness 10mm depth 75mm with suitable bolt holes fixing the flange in position with required welding around the flange pipe joint grinding for smoothing the welded portion including painting with red oxide primer etc. complete as per direction of departmental officers at site

od37328/2020_2021/IA : MS bent 110mm - Manufacturing supplying and fitting 110mm dia MS bent with shell thickness 6mm including painting with 2 coats of red oxide primer, laying the same to line and level as directed by departmental officers at site.

REJI JOSEPH

Bidder Name

REJI JOSEPH

Shijo Markose