PETTY REPAIRS AND DAY TO DAY MAINT WORKS OF EXTERNAL WATER SUPPLY AND CONNECTED WORKS AT RANIKHET, CHAUBATTIA, ALMORA AND KAUSANI UNDER GE RANIKHET

Amount

BOQ ( SCH 'A') Attending of day to day complaints, petty repair works of E/M nature pertains to External water supply comprise of checking of existing water supply pipe lines / items i.e. supply and distribution pipelines and Geysers with connected accessories like socket ,union,Tee/elbow, flange,reducers, etc for uninterrupted water supply; checking of pipelines for detection of defects/faults with necessery excavation/ refilling as required, carrying out repairs etc as required to make the lines functional or to restore water supply with and including cleaning , re-threading the old threads, cutting, welding work including supply and replacement of flanged/socket/union /reducer/tee/elbow etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required for pipelines upto any size,taking out and refixing nut bolts/rubber washers, bearings, of motors and alignment of coupling of pumps etc ,refixing of broken connections/ open/underground pipe lines and replacing defective items provided under relevant item(s) here-in-after with and including petty repairs items/materials i.e. nipples, threads,packing, arrangement of welding machine wherever reqd, in Md/OTM Accn and in any location within the area of Ranikhet by deploying sufficient number of qualified pipe fitter & helpers alongwith suitable T&P, safety

Item No 1 ( Contd ...) equipment & other necessary devices, every day including Sunday and Holiday, during time from 7:00 AM to 11:00 PM, complete all as specified and directed. Note for item No 01 : (i) All the complaint(s) received will be lodged & rectified by the contractor rep and will have to maintain a proper record as directed in complain register and in complain slip. Note: (a) Complain slip and complain register will be provided by the contractor without any extra charge. (b) Complain regiter will be produced on daily basis to JE and Engr-in-charge (c) Contractor or his tradesmen fails to attend and rectify the complaint(s), as described earlier, on same day or any stipulated time given by the JE/Engineer-in-charge, the penal recovery / penalty of Rs. 200.00 (Rupees Two Hundred only) per complaint per day for first day and after that Rs. 500.00 (Rupees Five Hundred only) per complaint per day shall be recovered from the contractor’s dues. Contractor shall provide and deploy adequate experienced professional to carry out day to day complaints and tradesman will remain present in Ranikhet area in 2 shifts, shift1 from 0700Hrs to 1500 Hrs from Monday to Sunday and shift 2 from 1500Hrs to

Item No 1 ( Contd ...) 1100Hrs from Monday to Sunday. In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account.Note:whatever be the nature of water supply complaint the wholesole rectification responsibilty lies with the contractor. The quoted rate are deemed to be inclusive of petty repairs items/materials i.e. socket ,union,Tee/elbow, flange,reducers,threading, nipples, lugs, nut bolts, washers, pipeline upto 1m length any size reqd in repairs/welding ,cleaning of water tank surroundings and valve pits, arrangement of welding machine whenever reqd etc as required at site,during execution of petty repair wks or attending complaints. Nothing extra shall be admissible on this account at any stage. Any major items/materials which are required to be replaced with new one i.e. valves, geyser items such as heating element, thermostat, pvc pipes etc shall be either mesaured & paid separately under respective item(s) or issued for "Free for Fixing only".

Item No 1 ( Contd ...) Quoted rate shall deemed to be inclusive of making/cutting threading in pipelines for connecting of new accessories, Excavation,refilling, and removing, welding /brazing work in geysers, refixing of geysers after repairs and making good of disturbed wall surfaces with cement plaster, putty and OBD etc to match with the existing surfaces and nothing extra shall be admissible on this account. The cost of transportation (to and fro) and other necessary T&P (i.e. pipe wrenches,screw driver set each sizes,L keys,Hammer, dia of any size, line tester, combination and cutting pliers, cutting knife, drill machine, hand gloves suitable for available voltages, Test lamp with conductor and holder etc), equipment and safety gear shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.

All as per item No 1 herein before but within the area of Chaubattia Cantt including Nagpani, Bhaludam, Highest point and Chaubattia.

All as per item No 1 herein before but within the area of Kausani Cantt

All as per item No 1 herein before but within the area of Almora Cantt

Taking out old unserviceable gun metal, globe or gate valve and Supply and fixing gun metal, globe or gate valves ISI marked class-I, with iron wheel head, screwed both ends, for iron pipe bore dia of pipe 50mm complete all as specified and directed.

All as per item No 5 here in before but bore dia of pipe 40 mm

All as per item No 5 here in before but bore dia of pipe 25 mm

All as per item No 5 here in before but bore dia of pipe 20 mm

All as per item No 5 here in before but bore dia of pipe 15 mm

Supply & Fixing indicator lamp round/ square type red/green colour suitable for any type of Geyser complete all as specified and directed.

Supply & Fixing Heating Element copper sheathed and nickel plated 1500 Watt traingular/ round type for geysers complete all as specified and directed.

Supply & Fixing Heating Element copper sheathed and nickel plated 2000 Watt traingular/ round type for geysers complete all as specified and directed.

Supply & Fixing Heating Element round type 230 volt , 2 KW for geysers complete all as specified and directed. Make Bajaj, Model NO 1018 or equivalent make as approved by GE

Supply & Fixing PVC Flexi Connection braided with PTMT nut internally threaded suitable for 15 bore of pipe, 450 mm long complete all as specified and directed.

Supply & Fixing Thermostate auto cut ISI marked 7" long suitable for any type and any capacity geyser all as specified and directed.

Supply & Fixing Thermostate auto cut ISI marked 11" long suitable for any type and any capacity geyser all as specified and directed.

Material & Labour for pressure release valve any type any capacity of geyser complete all as specified and directed

Material and Labour for Scraping old paint of geyser cap 25 Ltr ( Approx painting area- 1.5 sqm) making the surface smooth for painting, applying two coats of synthetic enamel paint over a coat of red oxide primer, as approved by Engineer-in-charge including writing MES No. on geyser with black paint of size as ordered and directed

Material and Labour for Scraping old paint of geyser cap 35 Ltr ( Approx painting area- 1.8 sqm) making the surface smooth for painting, applying two coats of synthetic enamel paint over a coat of red oxide primer as approved by Engineerr-in-charge including writing MES No. on geyser with black paint of size as ordered and directed

Material and Labour for Scraping old paint of geyser cap 50 Ltr ( Approx painting area- 2 sqm) making the surface smooth for painting, applying two coats of synthetic enamel paint over a coat of red oxide primer as approved by Engineer-in-charge including writing MES No. on geyser with black paint of size as ordered and directed

Supply & Fixing inner tank of geyser cap 50 Ltr made of MS steel sheet of thickness 20 gauge (Geyser make: Bajaj, Usha, recold, venus,v guard, pearl etc ) complete all as specified and directed

Supply & Fixing inner tank of geyser cap 25 Ltr made of MS steel sheet of thickness 20 gauge (Geyser make: Bajaj, Usha, recold, venus,v guard, pearl etc ) complete all as specified and directed

M/S NAYAL ELECTRICALS