Repair to leakage/seepage, Joinery, flooring, sanitary fitting, plastering, painting, approach path, drain and internal electrification of old MH under AGE B/R-I of GE Dehradun.

Amount

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete.

All as per Item No. 2.00 here in above but except brick complete. Note : Old serviceable brick obtained from demolition shall be reused. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, using water proofing compound surface finished even and fair complete.Note : Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick. (water proofing compound will be measured and paid separately)

M & L 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair including taking down existing cement plaster including racking out joints,hacking for key, scrubbing down with water etc. complete. Note : Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement . WPC will be measured and paid separately.

M & L rendering 10mm thick in patches n exc 3 Sqm in cement mortar 1:3 mixed with water proofing compound of cement finished fair faces of concrete surfaces, chajja/ facia even and fair without using extra cement . WPC will be measured and paid separately.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds, chajjas and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.

M & L 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, surface finished fair and even and applying two coats of white wash complete.

M & L preparing new plastered surfaces of ceiling and applying three coats of white wash complete.

M&L for preparation of wall and applying interior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/ Asian / JK/ Birla

M&L for preparation of wall and applying exterior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger /Asian/ JK/ Birla

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L preparation of old decorated surfaces of ceiling (Plastered) by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.

M&L two coat of white wash on already prepared surfaces of ceiling complete all as specified and directed by Egnr-in-Charge.

M&L one coat of white wash on already prepared surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M&L one coat of oil bound distemper in any tint on already prepared surfaces of walls complete all as specified in SSR Part I and directed by Engr-in-Charge (Note : OBD to be applied from company approved applicator)

M&L one coat of cement base paint on already prepared surfaces of external wall surfaces complete all as specified in SSR Part I and directed by Egnr-in-Charge.

M&L two coat oil bound distemper any tint on already prepared surfaces of walls complete all as specified in SSR Part I and directed by Engr-in-Charge. (Note : OBD to be applied from company approved applicator)

M&L two coat of cement base paint on already prepared surfaces of external walls complete all as specified in SSR Part I and directed Engr-in-Charge.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of PU Paint complete.

M & L preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in eppoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

Removing of bushes upto root level from the wall, roof, parapet upto tripple storey builing and repairing of disturbed surface with appoxy mortar with plaster and making good with existing surface with coloured photograph of before and after.

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premisescomplete.

All as per item No 27.00 here in above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete.

M&L glazed ceramic colour tiles size 375 mm x 250 mm x 6-7 mm thick or 450mm X 350mmX 7mm on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

Demolition of cement concrete ground floor and paving n.exc 15cm thick below or above ground level complete all as specified and directed

M & L PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate 25 mm thick as in leveling course to floors complete.

M&L for 100mm thick PCC flooring in Cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished surface even and smooth without using extra cement complete all as specified.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced)l complete.

M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection or similar work/places, complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) complete.

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete. Make : NTC

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete.

All as per item No 40.00 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete.

S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. Make : ECHON/Kumar Tech/Sintex

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge. Make : ECHON/Kumar Tech/Sintex

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete.

S & F factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded including dismantling old steel window complete.

S & F factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded including dismantling old steel window complete .

Taking down existing projected type hings from the steel window carefully with disturbing frame and fix 50 mm long mild steel box type hinge weld to steel frame and shutter with welding and making good including touch with paint and with existing surfaces including scaffolding all as directed by Engr-in-charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with silicon and oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane upto triple story of Bldg including hacking out complete all as specified and directed. Note : - Cost of scaffolding including.

All as per item No 51.00 here in above but except glass complete all as specified and directed.

S&F 18 mm thick PVC ply of one side prelaminated and other side plain white colour for cubboard shutter and frame including taking down complete as per specifications and as directed by the Engineer - in - charge.Make:-Rajshree, Polyline, ECHON/Kumar Tech

S&F 18 mm thick PVC ply white board to make shelves and partitions for cup boards including taking down complete as per specifications and as directed by the Engineer-in- charge. Make:-Rajshree, Polyline, ECHON/Kumar Tech

S&Fin repair Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

Hasp and staple 100mm safety type, stainless steel 202 grade with hinge pin including bolt to hinge plate and fixed with screws

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge.

S&F in repair magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long

S&F floor door stopper of stainless steel 202 grade bright finish double legged and tongue, with hard drawn steel spring, fixed in floor, overall length of cover plate 50mm.

S & F in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete.

S&F in repair 1mm wall thickness stainless steel 202 grade drapery rod with incl brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete. (Note : Sample/ design approved by Engineer-in-charge)

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

S&F in repairs PVC connection 15 mm dia 450 tm long with bras fly nut at both ends complete.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete.

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest jointed with trap with epoxy mortar (Asian/Berger), set in cement concrete type B-1 (1:2:4) complete (excluding Trap, flushing cistern and flush pipe) complete all as specified and directed by Engr-in-charge

S&F in repair spun cast iron 600 mm long 'P' trap fixed with epoxy mortar (Asian/Berger), set in cement concrete type B-1 (1:2:4) complete complete all as specified and directed by Engr-in-charge

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete. Hindware/Parryware/Jaquar.

S&F in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including pop up brass waste coupling and waste pipe for bottle trap . Make : Cera/Jaquare/Parryware

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Make : Supreme/Finolex

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Make : Supreme/Finolex

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete Make : Supreme/Finolex

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete Make : Supreme/Finolex

S & F in repair UPVC (SWR) bend, 75 mm bore' complete all as specified. Make: Supreme/Finolex

S & F in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 75 mm bore with access door complete all as specified. : Supreme/Finolex

S & F in repair UPVC (SWR) bend, 110 mm bore' complete all as specified. : Supreme/Finolex

S & F in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified. : Supreme/Finolex

S & F in repair UPVC (SWR) cowl, 75 mm bore' complete all as specified. : Supreme/Finolex

S & F in repair UPVC (SWR) cowl, 110 mm bore' complete all as specified. : Supreme/Finolex

S&F in repairs PVC tank lid/cover threaded with frame fixed with the existing water storage tank (cylindrical) for 500/1000 ltrs capacity tanks, complete all as specified and directed by Engr-in-charge

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : JAQUAR/Cat part No. KUP-35001PM/Hindware Cat Part No:F370001/Parryware Cat Pat No.T4302A2

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete. Make :Jaquar/Hindware/Parryware

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAQUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Parryware

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAQUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Parryware

S&F in repair plate rack 200mm and size 90 x 75 cm made out off 1.00 mm thick stainless steel grade 304 complete all as specified and as directed.

S & F in repair PTMTgrating square 150 mm size complete all as specified. Make : Prayag Cat No. 115

S&F in repairs brass chromium plated towel rail, 20mm dia 'D' type 60cm long between flanges. Make : Jaquar/Hindware/Parryware

Cleaning of existing PVC/RCC water storage tank with vaccum cleaner machine exc 250 to 500 ltrs capacity with D scaler (Taski) and dry with and apply on coat of anti bacterial spray (R1 Taski) as directed by Engr-in-charge. Date of cleaning to and CA No to be painted on water storage tank with stencil in black/ white synthetic enamel paint all as directed by Engr-in-Charge.

S & F rotational moulded polyethylene water storage tanks 500 Ltr triple layer white, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete

S & F rotational moulded polyethylene water storage tanks 1000 ltr triple layer white, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete

S&F in repair 75mm dia centrifugally cast (spun) iron fioor trap with grating including jointing to waste pipe fixed in cement concrete type B 1(1:2:4)

S & F in repairs 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed by the Engr-in-Charge.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed in cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of

All as per item No 108 (Contd/--).. 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including dismantling of old ceiling board, complete at all heights as per direction of Engineer-in-Charge.

S&F powder coated aluminium door with frame and shutter with glazing, following accessories and glazing with 4.8 mm thick retro reflected glass, rubber gasket, aluminium glazing clips, aluminium beading, mortice lock, aluminium stopper cleat, iron mongary, fabricated with following aluminium section:- Frame: 100x44x1.20 mm thick with rawl plug ,Middle lock rail: 85x44x1.20 mm thick, Bottom rail : 150x44x1.20mm thick, Top rail & Style : 85x44x1.20 mm thick, Aluminium glazing beading 0.70 mm thick, Aluminium handle 'D' type : 150 mm, Aluminium tower bolt 9.9 mm dia shoot 200 mm long, Mortice lock Brass: 100 mm 4 lever, Aluminium stopper cleat, Stainless steel hinges 100 mm long. Note: making good of wall surface with matching to existing surface including taking down complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&Fin repair Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 851 mm to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

S&F in repair Brass Mortice lock, two levers vertical type, size 100 mm size

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheet complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified

Dismantling wrought iron work of any description as specified and directed.

M&L Framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' complete all as specified and directed

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O including dismantling old section complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M&L for water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation with Asian smart care mortar and GP groute mortar and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface.

All as per item No 120.00 (Contd/--)… (c) Supplying, providing and applying waterproofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Execution to be done with authorised applicator of the manufacturer and company back gurantee to be given by the contractor. Work will be executed in smart assurance system

Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item).

M&L for dewatering and desludging of septic septic tank/sokage well of any size and depth by manually/mechanically (solid contents if not removed by mechanically should be removed by manually) and removing the sludge out side of MOD complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Pumping out sewage water from the man holes /Septic taank/soakage well at different locations by means of sewage tanker fitted with pump (5000 Ltr capacity) and disposing out off MD land as directed by Engineer-in-charge.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/disintegrated rock.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm. complete all as specified and directed.

Removing excavated material n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point. complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforecd concrete) set in cement mortar 150 mm internal dia in cluding PCC bed.

M&L for150 mm internal dia salt glazed stoneware drain pipes laid in trenches and jointed as specified

M&L for concrete bed to drain pipes 150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete Type C-2 1:3:6 complete all as specified and directed.

M&L walling of random rubble, well boned , bedded and solidly hearted, built in cement mortar (1:6) including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete.complete all as specified and directed.

All as per serial item No. 130.00 here in above but except stones complete all as specified and directed by the Engr-in-charge. (Materials shall be obtained from item No.129.00).

M&L for raised pointing in cement mortar (1:4) to random rubble, uncoursed stone masonry or brought up to courses of any description complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick in cement plaster on fair faces of brick or conctrete surfaces in cement mortar (1:4) rendering is to be finished even and fair without using extra cement.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided

M&L 65-75mm for reinforced precast cement concrete 1:1:2 with 1.25mm thick MS sheet painted with bituminous paint around the manhole cover (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.) vibromatic, articles with plain faces including necessary form work using surface vibrator, complete CA No and date of casting to be engraved on the cover slab by stencil and curing will be done in the water resverior all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of schedule 'A').

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete ground floor and paving n.exc 15cm thick below or above ground level including floor tiles etc

M & L for cement concrete ( 1:3:6 ) type C1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including concealed rigid PVC conduit medium grade including accessories incl cutting chases etc along with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

All as per Item No 142.00 here in above but one three pin 5 Amps socket out let on the same board with other switches complete.

All as per Item No 142.00 here in above but one three pin 5 Amps switch socket out let on the independent board with other switches complete.

All as per Item No 142.00 here in above but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 142.00 here in above but One light point controlled with switch 2 way complete all as specified.

All as per Item No 142.00 here in above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete.

M&L point wiring for one light point/Fan point controlled by one ,one way switch with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel/PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories

All as per Item No 144.00 here in above but one three pin 5 Amps socket out let on the same board with other switches complete.

All as per Item No 144.00 here in above but one three pin 5 Amps switch socket out let on the independent board with other switches complete.

All as per Item No 144.00 here in above but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 144.00 here in above but One two way point controlled with switch 2 way complete all as specified.

All as per Item No 144.00 here in above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & F Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed. Make HPL/Havells/Polycab/Cona

S & F Switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed. Make HPL/Havells/Polycab/Cona

S & F Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete. Make HPL/Havells/Polycab/Cona

S & F bell push flush type 5 Amps 230 Volts single pole complete. Make HPL/Havells/Polycab/Cona

Supply and fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified. Make HPL/Havells/Polycab/Cona

Supply and fixing Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified. Make HPL/Havells/Polycab/Cona.

S & F calling bell ding dong type AC 230 Volt single pole. Make Cona/Plaza/Golmedal

S & F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts .Make HPL/Havells/Polycab/Cona

Supply and fixing Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified. Make HPL/Havells/Polycab/Cona

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 3/5 watts complete. (for toilet or any other location). Make HPL/Havells/Polycab/Cona

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 7 watts complete. (for bathroom/on mirror or any other location). Make: PL/Havells/Polycab/Cona

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 10/14 watts complete. (For Bed room, living room or any other location). Make HPL/Havells/Polycab/Cona

S&F in repair mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Havells Cat No Edgelite or equilent in Philips/Wipro

S&F in repair wall/ceiling mounted decorative down lighter with 15 watt retrofit LED lamp with engineering plastic housing complete all as directed by Engineer-in-charge. (for kitchen or any other location). Make Havells Cat No Crown or equilent in Philips/Wipro

S&F in repair decorative wall mounting made out of polycarbonate suitable for and incl retrofit 15 watts retrofit LED bulb complete all as specified.(For Bed room, living room or any other location) . Make Havell Cat No City 1 New or equilent in Philips/Wipro/Mepro

S&F in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories. (For Bed room, living room or any other location) . Make: Crompton Trimlinea or equivalent of Philips/Wipro

Supply and fixing in repair of Bulk head light fitting with and incl 10 Watt retrofit LED bulb complete. Make Havells (Rugby) or equivalent of Crompton/Wipro/Philips

Supply and fixing LED recessed mounted 2'X2', 36 Watt and higher wattage in CRCA powder coated box type fitting with polycarbonate diffuser CCT >5700 K ,CRI >80,PF>.95 incl taking down old u/s fitting complete. Make Crompton greaves Polaris Nio - I or equivalent of Wipro / Phillips

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4 Sq mm as current carrying conductor and one run of 2.5 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose. Make:- KEI/Finolex/Havells/Polycab

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4 Sq mm as current carrying conductor and one run of 2.5 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into existing steel/PVC conduit complete all as specified incl taking down old u/s sub main. Note:- Three runs of wire shall be measured as one meter only for payment purpose. Make:- KEI/Finolex/Havells/Polycab

S&F in repair of tamper proof electronic single phase whole current energy meter (self powered LCD display) 10 Amp to 60 Amp, 240 volt class 1.0 AC supply including cable connection, proper sealing with lead. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly. The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. Make:- Secure i Credit 350 or equalent in L&T/BHEL. (Note:- Old unserviceable meter will be deposited to E/M store yard)

Supply and fixing of meter box of size 600x450x170 mm or nearest higher size with PVC hinged transparent lid suitable for and mounting arrangement for fixing of single phase energy meter and DIN rail for mounting of DP MCB 04 Nos PVC coupler for sub main wires 08 Nos complete Polycarbonate type (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, flame retardant, complete all as directed at site by Engr in charge or his rep complete. Note:- MCB and connection from MCB to energy meter with suitable size copper wire incl thimble, bottle lugs etc and shifting of existing meter are incl in item rate. Make:- Hensel/ABB/BCH/Universal/Schneider

Supply and fixing of Busbar chamber of size 600x315x214 mm or higher size with PVC hinged lid suitable for and mounting arrangement for fixing of MCCB 4 pole, 160 Amps 25 KA (Icu=100%Ics) 415 Volt,50 Hz, duly connected with and incl 04 Nos of copper Busbar 300 Amps fixed on epoxy insulators, Gun metal cable gland of 25 Sqmm 01 No and PVC coupler for sub main wires 04 Nos complete Polycarbonate type (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, flame retardant, complete all as directed at site by Engr in charge or his rep complete. Note:- Only MCCB shall be measured and paid for separately all other items incl connection from MCCB to busbar with suitable size copper wire incl thimble, bottle lugs etc are incl in item rate. Make:- Hensel cat No Mi 9410 or ABB/BCH/Universal/Schneider

M&L for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Make:- Legrand/Hager/L&T AU (Note:- DB and MCCB/MCB shall be of same make)

M&L for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Make:- Legrand/Hager/L&T AU. Note:- DB and MCCB/MCB shall be of same make.

S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA C series complete all as specrified & directed. Make:- L&T/Legrand/Scheinder

Supply and fixing of MCCB 100 Amps FP 415 Volts having breaking capacity 15 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

S & F MCB SP 6 to 32 Amp, 240 Volts, 'B' curve having breaking capacity 10 KA, air flow channels and ON/OFF indication.

S & F in replacement Isolator SPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA.

Material and labour for CPRI approved chemical earthing complete with GI pipe electrode 50 mm dia, 2 Mtr long with terminal size 50x6 mm buried directly in ground not less than 2.25 m deep below normal ground level connected with and incl galvanized wire 4 mm earth lead upto DB by means of nuts bolts check nuts GI washers etc duly protected by galvanized iron pipe 15 mm bore (light grade) including PVC accesse well and cover and gel type back fill compound necessary earth work in soft/loose soil complete all as directed by Engr in charge including testing on completion all as specified and directed. incl demolition to existing one complete. Make; SNE/OBO/ENNOVE NOTE 1. The unit rate includes for protection GI pipe 15 mm dia light grade and GI wire 4 mm dia from top of earth plate up to 7.5 meter above ground level.

Supply and fixing in repair of building security light luminaries with surge protector and photovoltaic/LDR sensor controlled made out of single piece die cast alluminium housing suitable for and including 1X45 Watt LED lamp type complete, pre-wired including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. Make Greenstar/ Philips/Wipro. (Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing )

Supply & fixing in repair integral type post top lantern made out of die cast aluminium housing, 35/40 watt LED IP 65 protection lenses type and frosted acrylic diffuser having separate surge protector 10 KV, efficiency of minimum 90 lumens/watt,clamp etc required to fix with existing bracket complete with all accessories all as directed incl taking down existing fitting complete. Make: Crompton Maple or equivalent in Havells/Philips

Supply and fixing in repair of self open type exhaust fan louvers GI square or round as per site requirement suitable for exhaust fan of size 300 mm complete incl screw raval plug etc complete all as directed by Engr in charge.

All as per item No 178.00 here in above but 450 mm

S&F three core PVC insulated flexible and over all PVC round cable of size 40/0.0060 with multi stranded copper conductor complete all as specified and directed.

S&F in replacement of water supply PVC flexible connection nylon braided with suitable threaded check nut with washer complete suitable for hot water 15mm dia alongwith threaded brass nuts and washers 45 cm long for geysers complete all as specified and directed. Make:- POLO/Havells/Prayag

Supply and fixing in repair of service cable 10 sq mm twin core weather proof multistranded aluminium conductor cable PVC sheathed PVC insulated round suspended with No.8 SWG GI wire and cable tie at distance of 01 mtr duly connected with earthing and clamp etc from Pole to building complete. Make KEI/Havells/Polycab Note: Earthing shall be measured and paid separately and all other items are incl in item rate.

MOHAN LAL GUPTA

M/S JAI PRAKASH GOEL

M/S C S AITHANI