PROVN OF ADDITIONAL SLUDGE TRANSFER SYSTEM IN SEWAGE TREATMENT PLANT AT AF STATION BAREILLY

Amount

Supply, installation, commissioning and testing of non-clogging type sewage submersible pump made of stainless steel complete with discharge range 100 to 400 LPM at 2-9 Mtr head, 2800 RPM, solid handling capacity 35mm of size and electric motor not less than 1 HP with and including delivery pipe size 50mm and submersible cable length 10 RM with all accessories complete all as specified and as directed.

Supply, installation, commissioning and testing of electromagnetic flowmeter suitable for 200mm NB DI pipe complete with all accessories with wires including connections from nearby points with suitable joints etc of suitable size including MS pipe (6 mtr approx) of size 300NB for making arrangements of closing of inlets of raw water alongwith suitable socket for fixing of the flowmeter inclusive of all nuts, bolts etc complete all as specified and as directed. Make :- Siemens, Danfoss.

Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for getting out / taking out / laying of GI / CI pipe line from bottom surfaces of excavation to required level / gradient etc complete all as specified and as directed.

Returning, filling in trenches with excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated material exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete as all as specified and as directed.

M&L for horizontal boring below pavement/road, in soft/loose soil for crossing 200mm to 25mm size CI /GI pipe lines complete all as specified and as directed.

M&L for dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable) in trenches complete all as specified and as directed. Note:- Only punned thickness shall be measured and paid.

M&L for well burnt Sub class 'B', old size bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick complete all as specified and as directed.

Supplying, installation, commissioning and testing LT panel outdoor, cubical type, double door, floor mounted, made out of 3.0 mm thick MS sheet of suitable size as outer cover and 1.6mm thick internal partitions duly powder coated complete with aluminium bus bar 100 Amps rating mounted on epoxy based post insulators duly drilled holes for connections, with air vent made of 45mm x 45mm x 6mm thick angle iron frame complete all as specified including necessay foundation grouted in PCC (1:2:4) for mounting the panel suitable for 415 Volts, 50 Hz, 3 phase and neutral system and internal wiring with suitable size of PVC insulated copper cable, copper lugs comprising of following accessories :- (a) Incommer:- (i) MCB 40 Amp, 4 Pole, 415 V, 10 kA (ii) Multifunction meter along with suitable CTs = 1 No (iii) Indicating LED lamp (RYB)- 01 set of three (b) Out going :- (i) MCB SP 10 Amp, 220 V, 10 kA 'C' Series for the incomer for the 03 Nos DOL starter - 04 Nos (03 Nos Working & 01 No Spare) (ii) Direct on line (DOL) Starter suitable for 220 V AC of Capacity 1 HP Sewage motor - 03 Nos Make :- Siemens/ Schneider/ L&T (iii) MCB TPN 10A - 01 No (For Flow Meter) Make :- Siemens, Schneider, L&T

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 core complete all as specified and as directed. Note:- Excavation, earthwork, protection of cable etc shall be measured and paid seperately.

Supply and fixing submersible copper cable flat type two core of size 2.5 Sqmm complete all as specified and as directed. Make:- Plaza/Kalinga/Finolex

S&F GI pipe medium grade 25mm bore with fittings for protection of submersible cable complete all as specified and as directed.

Supply and fixing mild steel framed work as ladder, cleats, and similar work for supporting water pipe line header conforming to Fe 410-O or Fe 310-O by welding or screwing nut, bolt & washer, with and including applying two coats of synthetic enamel paint over a coat of red oxide primer on MS work after preparation of surfaces complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11, outer dia 50mm complete all as specified and as directed. Note:- Specials shall be measured and paid seperately under respective items of BOQ.

S&F CPVC brass MTA 50mm size complete all as specified and as directed.

S&F CPVC brass NRV 50mm size complete all as specified and as directed.

S&F CPVC brass butterfly valve 50mm size complete all as specified and as directed.

S&F CPVC union 50mm size complete all as specified and as directed.

S&F CPVC elbow 50mm size complete all as specified and as directed.

Supply, installation, fabrication and fixing of frame made made from rustfree stainless steel Gde 304 angle/ tube/ flat etc for the tube settler tank complete all as directed by Engineer-in-Charge.

RYSA INFRATECH PRIVATE LIMITED

Sainath EnviroTech