157/2023 -24 Electrical work construction Bore Well U.P school

Amount

electrical

OD207504/2023-2024:Supply of 1.5 hp, 1.1 KW, single phase, 150 mm bore well submersible motor pump set suitable for 32 mm delivery pipe, water discharge of 2160 LPH at 100 mtr head , operating head range of 68-0136 mtr, Make:Deccan DR41H/20 or its equivalent Kirloskar / CRI/Texmo.

OD207505/2023-2024:Supply and providing single phase submersible pump controller with ammeter, voltmeter, push button, contactor etc including additional dry run protector (iAD) etc suitable for 1.5 HP submersible pump. ( L&T MR-G2 or equivalent make)

90.14.24.1:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.1 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

OD207506/2023-2024:Supply and providing 32 mm (1.25") size, standard duty (freen/Red) column pipe of 3 mtr length, for bore well submersible pump as required.

OD207507/2023-2024:Supply and providing 32 mm size bottom and top adapter set for column pipe of submersible pump as required.

90.17.8.2:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :32 mm

OD207508/2023-2024:Supply and providing 32 mm size heavy duty GI Union coupling in position as required.

OD207509/2023-2024:Supply and providing 32 mm size screwed type Gunmetal horizontal Non-return valve as required.

OD207510/2023-2024:Supply and providing 14 mm size nylon marine rope (white/green) for hanging the pump set in well, tying with an out side object as required.

OD207511/2023-2024:Labour charges for conveyance fixing and erection of submersible motor pump set in well with power cable connections, delivery pipe, nylon rope etc as required.

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

OD207514/2023-2024:Supply and providing the following size of bolt & nut with washers on the existing MS boxes/ earth bus etc as required including drilling necessary holes as required. 12x3mm brass nut & bolt.

SHIJU M.T

Bidder Name

SHIJU M.T

RINSON E V