Providing and Fixing Furniture for Ch Type 448 Quarters in Sector 28 at Gandhinagar

Name of Work : Providing and fixing Furniture for ''Ch ''Type 16 Tower (Ch- Type

Quarters) in Sector 28 at Gandhinagar .

MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT

ESTIMATED RATES

QUANTITIES TOTAL AMOUNT

QUANTITIES TOTAL AMOUNT

IT. ESTIMATED BUT ACCORDING TO

ITEMS OF WORK UNIT

NO MAY BE MORE IN FIGURE INWORDS ESTIMATED

OR LESS QUANTITIES

Providing and fixing modular wardrobe with loft using 16–18 mm thick calibrated

BWR grade plywood conforming to IS 710, complete as per approved drawings and

Engineer-in-Charge instructions. All exposed inner faces and niche openings finished

with 0.8 mm laminate, and shutters finished on both sides with high-pressure

decorative laminate (HPL). Shutters and panels bonded using marine grade adhesive,

ensuring smooth, even and aligned finish. All exposed edges sealed with 1 mm thick Rupees Nine

PVC edge banding using automatic edge banding machine with pre-milling process. Thousand Five

1 7,380.00 Smt Shutters fixed with auto-closing concealed hinges with clip-on mechanism and full 9,545.17 Hundred Forty-Five Smt

adjustability for proper alignment. Including all hardware such as SS handles, and Paise Seventeen

magnets, fasteners, door straighteners and accessories of approved make. Complete Only

fabrication, supply and installation including adhesives, labour, tools, transport and

finishing, ensuring level, aligned and defect-free work. Measurement in sqm of front

elevation area, complete in all respects as per specifications and approved design.

Providing and fixing modular kitchen cabinet work, constructed using 16–18 mm

thick calibrated BWR grade plywood conforming to IS 710, including partitions,

shelves, 5- drawer components, finished with 0.8 mm thick decorative laminate on

external surfaces and 0.8 mm thick non-decorative laminate on internal surfaces. All

exposed edges shall be sealed with PVC edge banding of approved make. The work Rupees Thirty

shall include providing and fixing tandem drawer systems (including standard and Thousand Four

2 1,210.00 pot & pan units) of approved make list, along with heavy-duty concealed hinges, 30,432.09 Smt

Hundred Thirty-Two

stainless steel handles, and all necessary hardware fittings. Drawers and shutters shall

and Paise Nine Only

be properly aligned and finished with smooth operation. The item shall include all

fixtures, fasteners, adhesives, labour, fabrication, transportation, installation,

wastage, and complete finishing as per approved drawings and instructions of the

Engineer-in-Charge.

Rupees Ten Crore Seventy-Two Lakh Sixty-Six Thousand One Hundred Eighty-Three and Paise Fifty Only

I/ We am/ are willing to carry out the work at __________ % above / below (should be written in figures and words) below / above the tenders rates sanctioned above of my

works put as under:

*Estimated Amount put to *Estimated Amount put to

Tender Rs.10,72,66,183.5 Tender Rs.10,72,66,183.5

Deduct Rs. _________Below Add Rs. _________Above

Total Rs. _ ________ Total Rs. __________

1 All work shall be carried out as per Public Works Department Handbook and other spcifications of Division or as directed.

2 All the columns in Schedule - B should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site, moisture, weather etc.

4 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

5 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

6 GST and Income tax TDS will be deducted at a source while making payments of bills

7 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated

in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

Dated signature Deputy Executive Engineer Executive Engineer,

of the Contractor Capital Project Sub Division:17 Capital Project Division No-4

Gandhinagar Gandhinagar