CONSTRUCTION OF 50 BEDDED CRITICAL CARE BLOCK IN GOVERNMENT MEDICAL COLLEGE HOSPITAL AT KARUR IN KARUR IN KARUR DISTRICT

Amount

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

upto 2m

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Providing ANTI-TERMITE treatment to soil adjacent under building foundation, plinth periphery of the building by application of chemicals of ISI 63613 part I to IV in stages to suit the progress of work as per the detailed specification as below. Including breaking of termite mounds, making holes with clow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers

Refilling with excavated earth other than Crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and filling in foundation and basement, etc with filling Crushed stone sand (M-SAND) in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling Gravel in foundation and basement in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five Crushed stone sand (M-SAND) and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Cement Concrete 1:5:10 (One cement, Five Crushed stone sand (M-SAND) and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers

Plain Cement Concrete 1:2:4 (one cement, two Crushed stone sand (M-SAND) and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no Crushed stone sand (M-SAND) to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Ground Floor

Third Floor

Fourth Floor

Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.

Providing and laying in position, standardised concrete Mix M-25 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of Crushed stone sand (M-SAND), but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement

For Ground floor

For First floor

For Second floor

For Third floor

For fourth floor

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two Crushed stone sand (M-SAND) and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

50mm thick slab (using 20mm HBGS Jelly)

75mm thick slab (using 20mm HBGS Jelly)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work In Cement Mortar 1:5( one cement and five Crushed stone sand (M-SAND)) Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for the following including curing etc.,complete complying with standard specification.

For foundation and basement

Brick work In Cement Mortar 1:6( one cement and six Crushed stone sand (M-SAND)) Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for the following including curing etc.,complete complying with standard specification.

For foundation and basement

In ground floor

In first floor

In second floor

In third floor

In Fourth floor

Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Crushed stone sand (M-SAND)) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Ground Floor

First Floor

Second Floor

Third floor

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed stone sand (M-SAND) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

For 25mm thick

Paving the floor with best quality Double Charged Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with following ceramic tiles of size 305 x 305 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Crushed stone sand (M-SAND)) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing Leather finished Granite slab Jet Black of similar varieties of approved colour for staircase treads and midlanding including nosing free all draft in all floors over a base layer of cement mortar 1;3 18 to 20mm thick the granite slab shall be laid over the cement mortar by applying color cement slurry in between mortar and slab the granite slabs re to be so laid that there shall be in line with other joint and uniform by cutting machine without any damage to the sides of corner of the granite slabs, the entire area at the that flooring so laid shall be neatly pointing with maching colouring cement at 1.80 kg/m2 etc., The Granite stone slbs and other materials to be used shall be got approved by the Rxecutive Engineer concerned before use on work etc., complete complying with standard specification and as directed by the departmental officers.

Providing full nosing to the steps or platforms to the Granite slab of 20mm thick including neat finishing, polishing, cost of powder, tools etc as directed by the departmental officers

Providing and Filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc. complete.

Providing Polymer Coating (Water Proof Coating) for sunken Portion of toilet with following specification and the surface shall be cleaned to remove all dust, foreign, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred throughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

Paving the floor with anti - skid tiles of size 400x400x10mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. ( The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with Tactile Paver Type of New Tek BT Yellow Colour Ceramic Tiles of size 305 X 305 X 15mm for Vision Impairment Person. over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing with printed design colour glazed tiles of size 600mm x 600mm x 8mm best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two Crushed stone sand (M-SAND)) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Dadooing with printed design colour glazed tiles of size 300 x 600 x 10mm best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two Crushed stone sand (M-SAND)) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing of PVC Trims (Beading)

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 16 to 18mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone sand (M-SAND)) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

38 / 40mm thick

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.110mm dia PVC Pipe

One floor

Four floor

Five floor

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of celling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are Inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc., complete]. The putty should be got approved by the Executive Engineer before use on work.

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement and with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement and with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Painting two coats of plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. External Water Supply Arrangements using UPVC pipes and UPVC specials

32mm dia UPVC pipe Above Ground Level

40mm dia UPVC pipe Above Ground Level

25mm dia UPVC pipe Below Ground Level

50mm dia UPVC pipe Below Ground Level

Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

50mm dia Elbow

32 mm Dia Elbow

25 mm Dia Elbow

32 mm Dia Tee

50mm dia coupling

32mm dia Coupling

25mm dia Coupling

20mm dia Coupling

25 mm x 20 mm Dia Reducer Tee

20 mm x 15 mm Dia Reducer Tee

25 x 20mm dia Reducer elbow

20 x 15mm dia Reducer elbow

Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works.Internal Water Supply Arrangements using CPVC pipes and CPVC specials

20mm dia CPVC pipe

25mm dia CPVC pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

50MM DIA G.M gate valve

32MM DIA G.M gate valve

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Long body tap

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make and quality including cost of shellac, thread, etc., complete

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm without pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with Crushed stone sand (M-SAND) cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two Crushed stone sand (M-SAND) and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of Crushed stone sand (M-SAND) and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Crushed stone sand (M-SAND)) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Nahani Trap of size 100 x 75mm with PVC gratings

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC soil / waste pipe

110mm dia PVC soil / waste pipe

160mm dia PVC soil / waste pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

110mm dia Elbow

75mm dia Elbow

Supplying and fixing M.S. Grill for opening corridor side ladder, entrance gate and name board angle using M.S. flats for inner and outer members which should be fixed as directed by the departmental officers including cost of providing one coat of red oxide primer. The design of MS Grill should be got approved from the departmental officers before use on work.

Fabricating Supplying and fixing in position of Aluminium anodised powder coated 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Fabricating Supplying and fixing in position of Aluminium anodised powder coated single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. (With Automatic Door Closure and Hinges)

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat Crushed stone sand (M-SAND)witching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

Single Leaf

Supplying and fixing of Stainless steel door frames for single leaf and double leaved door using Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification.

Supplying and fixing Solid core Particle board flush shutter of nominal thick of 35 mm with Teak ply on both sides and with T.W. lipping alround conforming to IS 2302 including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300 x 12 mm aluminium tower bolt 2 nos. 200x12 mm aluminium tower bolts 1no. 250 x 16 mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Single Leaf

Double leaf

Supplying, fabricating and fixing in position factory made Stainless Steel Flush Door Shutter 35mm thick using SS 304 Grade 1.6 mm thick, Stainless Sheets on both sides (Equivalent to IS 6911-04 Cr. 19, Ni 9) minimum 8-8.5% nickel and 18% chromium sourced from original stainless steel manufacturer with view panel size 30mm x 45mm made up of 6mm thick clear toughened glass fitted with double side adhesive tape and finished with dowconing silicon sealant, floor pring for each shutter, consealed tower bolt, suitable stainless steel locking arrangement and other necessary furniture fittings of approved quality. The vertical styles and other frame members and cross stiffeners shall be of same quality stainless steel box section of suitable size and thickness with proper core material as prescribed by the Departmental Officers

Providing and fixing of 1.2mm thick Lead Lining Door for X-Ray Rooms, Scanning Rooms with Mild Steel Door Frames 105mm x 57mm X 18 G and 12 G x 50mm Shutter made of GI with PWG finish and honey wool insulations with SS 101mm x 75mm x 3mm SS 304 Ball Bearings Butt Hinges, Mortice Sash Lock ML 100A, 50mm BS, 85mm centre, CL 207 : Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make), Heavy Duty Door Closer, Frames fixed wih walls using Mortice Sash Lock ML 100A, 50mm BS, 85mm centre CL207: Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make) all neccesary accessories and fittings as per the required and as per the approval for the Department Officer Sqm. 13000.00

Supply & fixing of WPC (Wood Polymer Composite) Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter and the design is as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the door shutter, all made of aluminium.

Supply & fixing of WPC door shutter, extruded as a single core board with rifid WPC compound with the thickness of 25mm (1- 1mm) & minium bulk density of 550 KG/Cub.& shore hardness of 55. The door shall be a plain matt board as decided by the Engineer in Charge of the department. The WPC door shall be fixed onto the Aluminium 'G' type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4" in SS. (Sliding door)

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Fly ash bricks of size 23x11x7cm with Plastering with

CLEAR SIZE 0.45 X 0.45

CLEAR SIZE 0.60 X 0.60

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying wrought fixing Ornamental Teakwood entrance door as per the drawing and designs approved by the departmental officers. The size of the opening is 2.10X 2.40. The outer frame of the door is 150mmx125mm teakwood. The main door shutter opening size is 1.80 X 2.03m. The main door should be double leaves and each door shutter fully panelled. The door panells shall be of 50mm thick teakwood planks with ornamental designs approved by the Executive Engineer. The Lock rail and bottom shall be of 200 x 50mm tk teakwood, top rail 230x50mm tk teakwood. The door frames and shutters shall be given of cost of best approved quality melamine finish. The rate inclusive of cost of approved quality teakwood, 10mm thick designed toughedned glass Special type Heavy Brass Aldrop 300mm X 20mm. Special type heavy Brass tower bolt 300mm Length. Special type heavy Brass tower bolt 250mm Length. The cost includes cost of material, labour charges, conveyance charges, fixing charges, designing charges and glass design charges, electricity charges and all other incidental charges., etc. All materials should be got approved by the Executive Engineer before use on works.

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents /Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Float Control etc.

1000 litres

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing of Sanitary Incinerator for Ladies bathroom with G.I.Flexible hose pipe with accessories like PVC elbow hose clamp & U clamps fasteners and Aluminium tape includes cost of all materials,labours,power consumption charges,loading,unloading,conveyance to site etc., as directed by the departmental officers.

Providing Rain water pit of clear size 1.20m dia and 1.20m depth including earth work excavation, fixing precast reinforced cement concrete coller, filling crushed stone sand, 40mm & 25mm guage HBGS stone jelly, covered with precast concrete slab 5 cm thick, etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and laying of Interlocking Paver block stone 83mm thk. over a base layer of Crushed stone sand (M-SAND) filling incl. cost of materials laying and labour charges etc, complete

Supplying, fabricating, erecting and fixing Hilux (or) equivalent board false ceiling upto a ceiling height of 4.5m from floor level.

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes

Supplying and Fixing of Emblem 15" dia to suit the Architectural elevation drawings given for the including Cost, conveyance and all other materials and Labours involved etc., complete and as directed by the Department Officers.

Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such

Supplying and fixing of SS False Ceiling

Supplying and fixing of SS Wall Cladding

FLOORING SEAMLESS VINYL FLOORING WITH ANTI STATIC AND ANTIMICROBIAL PROPERTY It shall be self leveling 3.00mm anti static seamless PVC flooring. Floor shall be smooth, non-slip, impervious material conductive enough to dissipate static electricity but not conductive enough to endanger personnel It shall be Electro Static Discharge (ESD) combat PVC seamless flooring of very high quality thickness not less than 2.00mm. Continuous roll shall be used and with minimum joints. The Joints to be welded by special PVthermal units using PVC welding bars of same colors. The sheet shall be highly durable to shock and indentation. It shall be scratch proof, inert to body fluids, chemicals and disinfectants & shall not beaffected by the temperature variations.The flooring shall be done by skilled workers of the accredited agencies, authorized by the supplier of PVC sheets. The Electrical resistance (Point to ground) shall be within 2.5 X 104 to 5 X 106 Ohms. The floor shall not allow build up of Electrical charges beyond 100V due to antistatic effect. The corners shall not be terminated sharply & concealed coving shall be used to overlap the wall panel to a height of approx. 25mm & sealed perfectly & uniformly. Self leveling compounds shall be used.

Supply and installation of Medical gas copper pipe line arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non arsencial phosphorous gas copper pipe line with saddles complete with brazing work including all copper fitting (Tee,Elbow,Reducer,Coupling).The copper pipe lines should be tested suitable for a steam of working pressure of 17.34kg./cm2(17 bar) and confirm to BS 864 standard with specially made for brazed socket type connection.The medical gas copper pipeline should be tested as per standard and commissioning after painting as per international code no IS 2379/1963 Table-V.The pipe lines installed at the various wings and floors etc.,complete as directed by the departmental officers as per IS code 12827/1989&ISO 7396/1987 specification

28mm dia copper pipe ODx0.9mm thick

22mm dia copper pipe ODx0.9mm thick

15mm dia copper pipe ODx0.9mm thick

10mm dia copper pipe ODx0.9mm thick

Design,supply&fixing of Gas outlet points:(Self Sealing type-Single/Dinoutlet type) with S type bracket made up of copper and the out let of non-interchangeable for other gas.The outlet points are brazed with brass bracket with self sealing valve(stainless steel) with all accessories and complete set and are converted by plastic cover duly colour coated as per specific gas and button cover etc.,complete as directed by the departmental officers and as per IS Code 12827/1989 & ISO 7396/1987 specification.

Brass Isolation valve. suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball value of RB or Italy or reputed make,connected in line with medical gas pipe line system by using suitable size brass valve adopter union,ferrule,nipple,rubber "O" ring,taption lap and etc.All pipe line regulators shall be capable of controlling pipee line pressure and must compatible with the requirements specified in IS 12827-1989.All valves should be pneumatically tested for twice the working pressure for the gas line as per IS code 12827/1989&ISO 7396/1987 specification.

15 mm dia ball valve

22 mm dia ball valve

Supply of Flow meter with humidifier bottle flow meter should be back pressure compressed flow meter should be accurate gas flow measurement with control range 0-13 litres per minute.It should meet strict permission and dumbling standard.The meter body should be made of unbreakable polycarbonate material and auto cleavable at 134 degrees centigrade.The rate includes flow meter and its accessories (Silicon tube with mask).The cost of materials including transport-taxes etc complete as standard as directed by the departmental officers and as per IS 12827/1989 and ISO 7396/1987 specification.

Supply of ward vacuum unit with gauge both mounted on a collection jar of capacity 600ml and with a wall bracket for mounting it on the wall. The collection jar should be made of unbreakable polycarbonate materials which is fully auto cleavable at 134 degrees centigrade as per standard specification and as directed by the departmental officers and as per IS 12827/1989 and ISO 7396/1987 specification.The rate includes cost of silicon hose with SS nipple on either side.

Supply and fixing of Fire fighting application oblique type Stainless Steel Hydrant Valve of size 63mm – dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. (Make; OMEX/KARTER/LIFE GUARD/SAFE GUARD/EQUIVALENT.

Supply, Installation of Fire fighting application 180 degree swinging type, hose reel drum with 20 mm dia braided thermoplastic hose of 30 meters long so as to extent to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve & open & close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply, and fixing in position of Fire fighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless Steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply, and fixing in position of Fire fighting application 63mm dia Stainless Steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers .(MAKE:OMEX/KARTAR/LIFEGUARD/SAFE GUARD/EQUIVALENT.

Supply and Fire fighting application M.S. Hose Box to keep two numbers of Hoses and one number of branch pipes with nozzle. having proper glass window type double door with universe open key, painted inside white and outside PO red. Near every hydrant point including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. (Make: OMEX/KARTAR/LIFE GUARD/ SAFE GUARD/ EQUIVALENT.

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, Shellac etc.,as per standard methods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.(Make: OMEX/KARTAR/SAFE GUARD/EQUIVALENT.

Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1500mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved.

Supplying and installing of approved type Rosette Plates (Recessed Type in Two Pieces) for sprinklers below false ceiling area. The Rosette shall be fabricated by MS plate of 2mm thick and the finish shall be powder coated and colour, as directed by the Departmental Officers.

Supply, erection, testing and commissioning of MS ‘C’ Class Heavy duty pipe as per IS 1239,to withstand a developing pressure of 10kg/sq.cm including necessary fittings like MS flange of table ‘E ‘ Elbows, reducers, gaskets, both, nuts with washers & Joints as per standard method of arc welding .Including one coat metal primer and two P.O RED painting including conveyance ,all incidental charges ,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make; JINDAL/EQUIVALENT.

150 mm dia

100 mm dia

80 mm dia

50 mm dia

25 mm dia

Wrapping and coating anti-corrosive treatment for underground MS pipe having one coat of anti-corrosive metal primer ,one layer of Asphalt Tar tape wound over the M.SPipe as per standard methods as per standard specification as directed by the departmental officers

150 mm dia

Supply ,erection, testing and commissioning of Cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’ gaskets , bolts& nuts including conveyance all incidental charges,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make:NORMEX/KARTAR

150 mm dia

100 mm dia

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead, tank at terrace leve l near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312. including conveyance, all incidental charges, necessary scaffolding and re-doing dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

150 mm dia

100 mm dia

Supply, erection, testing and commissioning of Gun metal Gate valve of size 50mm dia including necessary MS flange of table ‘E’ gaskets, blots & nuts, etc. installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make:LEADER/EQUIVALENT.

Supply, erection, testing and commissioning of Gun metal non-return valve of size 50mm dia including necessary MS flange of table ‘E’ gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc complete as per standard specification and as directed by the departmental officers, Make: LEADER/ EQUIVALENT

Supply and providing 1000 Litres capacity priming tank made up of PVC Make: SINTEX/EQUIVALENT

priming tank mounted with the supporting arrangement fabricated using MS angle for the height of 3.00 mtrs from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room as directed by the department officers

Supply and laying of following sizes of armoured Aluminium/Copper cables for electrical motor. control Panel, Pressure switch, jockey motor etc. all incidental charges necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. Make.POLYCAB/PARACON/FINLOEX/EQUIVALENT

3 core 10 sqmm armoured copper cable

2 core 2.5 sqmm armoured copper cable

Earthing arrangements with GI earth plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work. Refilling the sides of foundation with excavatedearth as per thestandard specification and as directed by the department officers.

Supply, erection, testing and commissioning of pressure Gauge with 0 to 141 kg range of reputed make with necessary value, milling thread Ms coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance. All incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. complete as per standard specification and as directed by the departmental officers. Make: H-GURU/ISIMARK/EQUIVALENT.

Supply, erection, testing and commissioning of suitable Pressure switch of reputed make line indfoss or Donfoss including necessary values, couplings etc. connected with electrical main control panel and setup at proper differential so as to auto start& auto stop the electrical motor. Jokey motor including conveyance. all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary metering protections & indications complete as per standard specification and as directed by the departmental officers. Make: DONFOSS/INFOSS/ISIMARK/EQUIVALENT.

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency cicumstances, coupled with 11 KW / 15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia., including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent)

Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade inlet with necessary Gun metal 63 mm dia non return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry, including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply, erection , testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make: KARTAR/ EQUIVALENT.

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) powder type Fire Extinguisher of 6 kgs capacity as per IS: 15683 with pressure gauge, discharge hose & control nozzle, wallmounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers

Providing, fixing pipe supports from coloumns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.

100mm Dia

80mm Dia

50mm Dia

Supplying, installing, testing and commissioning of 12 - Zone Conventional Fire Alarm Control panel with 48 hours battery back up for normal operation. The Panel Shall be provided with battery charger etc, and as directed by departmental officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Supplying, installing, testing and commissioning of conventional electronic Hooter with base and as directed by departmental officers.

Supplying, installing, testing and commissioning of Manualcallpoint (break glass type) withback box and as directed by departmental officers.

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

Painting the wall with Texture Finish Paint including labour charges

Wiring with 2x1.5sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point/ fan point (for electronic regulator) (5 points/ Coil) Higher End)

Wiring with 2x1.5sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point/ fan point (for electronic regulator) (6 points/ Coil) Higher End.

Wiring with 3x1.5sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End.

Supply and fixing of 16A Two-way switch in suitable Modular flush type GI box on wall with suitable front cover plate with earth connection (Higher End) (For Lift well lighting Control)

supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of single box type 4'20W LED fitting fitting complete with conduit pipe suspension from the ceiling with 20 W LED TubeLight (Double Side) with PVC unsheathed FRLS copper leads from terminals to the fitting.

Supply and fixing of 4'20W LED Tube light fitting with with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting. (Higher End)

Supply and fixing of 9W LED Lamp for BH point.

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1no. 32mm GI bend complete on the existing post/on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 1200mm (48") Sweep BLDC ceiling fan complete (HIGHER END) with 2 Module 100 W Fan Step Regulator (HIGHER END) with stepped with 300mm down rod on the existing fan clamp

Supply and fixing of 12" (300 mm) Wall mounting fan on wall with necessary connection complete.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep (light duty) AC exhaust fan.

Supply and fixing of AC/ DC 76mm Buzzer/ Call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch.

Supply and fixing of 1no.6A two module 5pin socket, 1no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 3nos. 6A two module 5pin socket, 3nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1no. 6/ 16A two module socket, 1no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20Amps DP plug and socket in sheet steel enclosure with 32A DP MCB in flush with wall with earth connection. [for AC Plug]

Supply and fixing of 32A DP MCB in Metal box DP enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher End)

Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.

Supply and fixing of 63A FP MCB with 63A 30mA FP ELCB in 8 module weatherproof enclosure in flush with wall and making good of the concealed portion with earth connection (Higher end).

Supply and fixing of 100A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 200 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCB switch as incoming and 10nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End.

Supply and fixing of 7segment 4way TPN MCB sheet steel distribution board (Higher end) with metal/ acrylic door cover flush type/ surface type fitted with busbars and neutral links with single/ three phase MCB outgoings and seperate 4way provision for accomodating one no. 4pole incoming MCB/ Isolator and another seperate 4way provision for accomodating one no. 4 pole ELCB/ RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB/ Isolators (totally 12nos) for sub incomers in 3segments with lable holder and provison for taking up cable for size not less than 35sq.mm. with the following in flush with wall with earth connection only.1). 63A 4P MCB - 1 no.2). 63A 4P 30MA RCCB/ELCB - 1 no. 3). 63A DP MCB Isolator -3 nos4). 6A to 32A SP MCB - 12 nos.

Supply and fixing of vertical type 6 way triple pole neutral MCCB DB in sheet steel enclosure double door metal cover with IP 43 protection with 1No. 125A FP MCCB with Spreader Terminal as incoming and 2Nos. 63A TP MCB and 2Nos 32A TP MCB as outgoing with suitable cable end box in flush with wall and making good of the concealed portion with earth connection. The MCB DB, MCCB and MCBs should be with ISI mark and Higher end.

Supply and fixing of 8way single pole and neutral MCB DB with metal door cover with IP 42 protection with 1No. 32 Amps DP MCB as incoming and 2Nos. 10A SP MCB and 2Nos. 10A DP MCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Higher End)

Supply and fixing of 32A FP MCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher End make) (Autoclave and AC Indoor)(DATA-8)

Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 15sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5sq.mm copper wire and making good of the concealed portion.

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion. [For 32A DP Plug, 12W SPN & 8W SPN]

Supply and Run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion. [For 32A FP MCB AC Indoor & Sterilization] SD 357

Supply and Run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 16 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and Run of 4 of 25sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 25 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and run of 3 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3 ½ x 25sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 ½ x 25sq.mm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 25sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and clamping of 3 ½ x 50sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 ½ x 50sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3 ½ x 50sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and clamping of 3 ½x240sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½x240sq.mm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½x240sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and clamping of 3 ½x185sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½x185sq.mm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½x185sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and clamping of 3 ½x 150 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.(for 200A Panel and 200A Switch)

Supply and fixing of brass cable gland for 3½x150sq.mm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½x150 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and laying of 2Run 3 ½ x300 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75m putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (MV Panel - Rising main)

Supply and clamping of 3 ½ x 300 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (For Power factor Panel and 400A panels)

Supply and fixing of brass cable gland for 3 ½ x 300 sq.mm PVC armoured LTUG cable, with earth connection.

Supply and providing cable end termination of 3 ½ x 300 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and fixing of 5000VA UPS with 8Nos.12V 150AH tubular battery [Exide IT 500] with 2hour back up and 48months warranty for mentioned capacity on full load operation and the following features. a) Inverter shall be free from workman ship defects sharp edges nicks, scratches, burs etc, all fasteners shall be fixed properly. Equipments shall be complete with all parts and all parts shall be functional.b) Enclosure shall conform to protection requirement of IRL to IS 13947 (part 1) 1993. c) Switching device shall be most ET (or) IGBT. d) Switching frequency shall be above 50HZ. II. Input ; 120 v to 260 v 50 HZ single phase AC III. Output : The variation in output voltage from No load to full load expressed as a percentages of no load voltage shall ont exceed +1.5% over + 10% and 20% variation of the rated DC input voltage. The frequency of the output voltage shall be 50 HZ + 1.3%. IV). Inverter efficiency minimum 85% as per CI.T.93 of ISS.

v) Over load: inverter shall with stand 10% overload for at least 10 minutes. V). Protections.VI). a) Input voltage goes outside the range 120 to 260 volts the system shall switch over to inverter mode. b). over voltage short circuit and over load at inverter output terminals. C).Battery reverses polarity.d). Protection against over discharge.The load shall be cut off as soon as the voltage of the battery terminal falls blow. i) 10.5 v for 12 v and ii) 21v for 24v battery systeme).The inverter shall incorporate an arrangements for automatic charge over of load from main supply to the inverter AC output incase of failure of mains supply with correct pending indication as per cL; 5.6 of IS 13314/ 1992 f). inverter should hane surge protection also VII indicators. a) Following indicators shall be provided i) Mains presence ii) Mains mode. iii) Battery charging iv) INVERTER MODE v) Battery low.

80 battery bank; 12 Volts lead battery to IS 7372 (1995) with amdts.No1,2&3 shall be reputed makes from the following i.e Exide/ Amci/ yuosa pretolite/ kirloskar/ amarraja. ISI marked. 9) Battery stand with wheel angle iron frame arranged.

Supply and fixing of 3000VA UPS with 5Nos.12V 150AH tubular battery [Exide IT 500] with 2hour back up and 48months warranty for mentioned capacity on full load operation and the following features.a) Inverter shall be free from workman ship defects sharp edges nicks, scratches, burs etc, all fasteners shall be fixed properly. Equipments shall be complete with all parts and all parts shall be functional. b) Enclosure shall conform to protection requirement of IRL to IS 13947 (part 1) 1993. c) Switching device shall be most ET (or) IGBT.d) Switching frequency shall be above 50HZ. II. Input ; 120 v to 260 v 50 HZ single phase AC III. Output : The variation in output voltage from No load to full load expressed as a percentages of no load voltage shall ont exceed +1.5% over + 10% and 20% variation of the rated DC input voltage. The frequency of the output voltage shall be 50 HZ + 1.3%.

IV). Inverter efficiency minimum 85% as per CI.T.93 of ISS. v) Over load: inverter shall with stand 10% overload for at least 10 minutes. V). Protections.VI). a) Input voltage goes outside the range 120 to 260 volts the system shall switch over to inverter mode. b). over voltage short circuit and over load at inverter output terminals. C).Battery reverses polarity d). Protection against over discharge.The load shall be cut off as soon as the voltage of the battery terminal falls blow. i) 10.5 v for 12 v and ii) 21v for 24v battery system e).The inverter shall incorporate an arrangements for automatic charge over of load from main supply to the inverter AC output incase of failure of mains supply with correct pending indication as per cL; 5.6 of IS 13314/ 1992 f). inverter should hane surge protection also VII indicators. a) Following indicators shall be provided.i) Mains presence ii) Mains mode. iii) Battery charging

iv) INVERTER MODE v) Battery low. 80 battery bank; 12 Volts lead battery to IS 7372 (1995) with amdts.No1,2&3 shall be reputed makes from the following i.e Exide/ Amci/ yuosa pretolite/ kirloskar/ amarraja. ISI marked .9) Battery stand with wheel angle iron frame arranged.

Design, Engineering, Fabrication, Supply, Erection, Testing, Commissioning and handing over of 26Persons capacity Bed cum Passenger lift (Gearless Lift with Machine Room) complete with the following specifications I. General"Number of Lift : 1 No(a) Capacity and type : 26Persons Bed Cum Passenger Lift.(b) Speed : 1 Mtr / Sec.(c) Drive : Micro Processor based VVVF (d) Size of Lift well : 2350 x 3000 (MM Wide x MM Depth) as per IS 14665 (partI) 2000 to be constructed by PWD civil wing.(e) No. of floors : 4 (Ground + 3th Floor)(f) Total height of Travel : 22 Mtr/ PIT 1800mm/ Head Room 4800mm." (g) No.of stops : 4 (Ground + 3 Floors)(h) No.of opening : 4 (Ground + 3th Floor)(i) Construction of lift well : R.C.C. with brick masonry.(j) Power supply : AC 415/ 440 Volts, 3phase, 50 Cycles.(k) Auxiliary supply : 230V, AC supply ( Single phase)(l) Position of machinery : Directly above the lift well-Gearless.(m) Lift pit depth : 1800mm(n)

Leveling accuracy : High level accuracy with smooth & jerk free travel and stopping.II. CARa. Size of Lift Car inside : 1600mm x 2400mm x 2400mm (MM Wide * MM Depth * MM Height)b. Design of lift car: Stainless Steel c. Car ceiling : Sleek (Small circular Lights).d. Car floor : Grey- 20mm Reccess.e. Car fittings : Stainless steel illuminating push button and 7 seagments digital position indicator and overload indicator, 220V A/C electric fan 300mm swing, CFL fittings, UPS operated emergency alarm and light, floor announcement with musics, ARD function announcement.f. No. of Opening : One in front onlyg. Car Entrance : One in front onlyPower Operated side opening sliding door Pre-Coated steel-Grey.h. Clear opening : 1200 x 2200mm Wide x mm Height) Lintel: 2300mm as per IS 14665 (part I) 2000III. ENTRANCE a. Car Door : Power Operated side opening sliding door Pre-Coated steel-Grey.b. Landing Entrance Doors: side opening sliding door-Pre-Coated steel-Grey.c. Type of Entrance Frame: Stainless steel

This shall consist of suitable type battery system with charger, inverter, under voltage protection system etc. complete with all accessories IX. MINOR BUILDER WORK :To be done by the lift contractor.X. SCAFFOLDING WORKS :To be done by the lift contractor.XI. FREE SERVICE AND MAINTENANCEDURING THE GUARANTEE PERIOD OF ONE YEAR & SAFTY CERTIFICATE a. Guarantee : Guarantee for materials and work-manship of equipment not less than one year. b. Free maintenance : Free comprehensive, servicing and maintenance during the guarantee period to be provided by the Lift contractor (1year) and important necessary training of employees, for minor maintenance works and proper handing over of lift to be done by the lift contractor. c.Preparation of Drawings and obtaining CEIG's Safety Certificate for lift approval as per lift act with payment of necessary fees to CEIG and insurance policies. If any applicable to lift. d. Site tests in accordance with IS 14665

shall be carried out at the time of handing over. XII. OTHER INCLUSIONS :Over speed Governor, phase failure and phase reversal relay, alarm bell, T. Guide brackets for car and counter weights, rubber padding under winding unit, Motor of adequate capacity, electro magnetic brake with compression springs, car safety gear, buffer, electro mechanical door locks, tubular S.S hand rail in car.. Steel ladder for machine room, Emergency key, motor over load protection devices, final limit switch, position and direction indicators for car and landing entrances, main suspension ropes, counter weights, lifting joists for mounting the machines S.S. facial plate for car operating panel & landing fixtures, fireman's switch and other necessary controls ,Overload Warning indicator with audio annuouncer complete set.

Supply, testing, commissioning and handing over of 1No, 250KVADiesel generator set of 0.8PF, 3phase, 415Volts, 50Hz, 1500 RPM complete confirming CPCB IV + Norms and BIS specifications A) ENGINE :Water cooled diesel engine suitable for generator application with a shaft out put of 310 BHP suitable at 1500 RPM under NTP conditions .The engine shall comprise the following standard scope of supply: 1) Dry type Air cleaner. 2) Expansion bellow. 3) Radiator, radiator fan and mounting. 4) Air to air charge cooler. 5) Exhaust gas turbo charger. 6) Lube oil cooler and lube oil filter. 7) Fuel filter (pre and micro). 8) In-line mono-block fuel injection pump with governor and fuel feed pump. 9) Electronic governor. 10) 12V/ 24V battery charging alternator. 11) 12V/ 24V Volt electric starter motor. 12) Engine test certificate. 13) Residential Mufler. 14) Fly wheel with starter ring. Engine instrument panel/ mounting:

Engine control panel consisting of ON/ OFF/ START/ KEY, lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator.Safety system of Engine: The engines shall trip for the following conditions with Visual alarm device. 1) Low lubricating oil pressure. 2) High water temperature . 3) Vee - belt failure and over speed. 4) Low battery indication. The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.B) ALTERNATOR :250KVA/200KW capacity of Brushless Alternator AC 3phase, 50HZ, 415Volts, 0.8P.F, 4 wire self exited,self regulated designto run at 1500 RPM under NTP conditions conforming to IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate

28) Rectangular copper bus bars for 400A (1No for each phase, neutral and earthing terminal) capacity duly colour coded with head shrinkable PVC sleeves. 29) 1No mains voltage monitor.30) Hooter/ Audio alarm for indication set fails to start and for DG O/ L.31) 1set timers. 32) Audio and visual indication arrangements for , a) Low lubricating oil pressure, b) High water temperature, c) Over speed. 33) 1No Earth fault relay. 34) Isolator to Isolate the neutral.Note:1. The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements. 2. The engine should trip for the following conditions. a) Low lubricating oil pressure, b) High water temperature, c) Over speed. 3.Supply and fitment of Auto mains failure panel to EB service with 400Amps switch and contactors with scuf control relays, timers etc.D) ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated of 16SWG CRCA MS sheet.

The silent canopy shall be nut bolt type construction. Critical processes of punching are done on CNC machine to maintain dimensional accuracy of hole within 0.1mm, powder coating done after seven-tank surface preparation process of sheet metal.Canopy panel and door shall have inside lining of FIRE-RETARDANT 64kg/m density mineral wool of 100mm thickness as acoustic material. Four hinged doors shall be provided to canopy. The maximum permissble sound pressure level should be as per the norms prescribed by the Central Pollution Control Board/ State Pollution Control Board/ Competent Authority concerened or shouble be within 75 db(A) at 1 meter from the enclosure surface whichever is advantageous to the department. The emergency stop should be available on the enclosure panel. The enclosure provided shall be duly approved by the Engine Manufacturer of the Engine provided for Diesel Generator Set mounted inside and should be to the satisfaction of inspection/ testing authority concerned

SURFACE TREATMENT–PAINTING:The enclosure shall be suitably treated for degreasing, de-rusting and phosphating. The canopies are passed through seven-tank treatment thoroughly. ADDITIONAL FEATURES OF CANOPIES :Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any. WORLD CLASS COOLING PACKAGE: Canopies shall have cooling package for which it can perform at 45 deg C ambient temperature. No grounding required on the ground, only a level surface capable of with standing the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading.

Temperature rise inside the canopy:Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well with in 5-7 deg centigrade. D) Base Frame Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation chargesE) Fuel Tank"Fuel tank of atleast 440 Ltrs capacity shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance.First charging of fuel oil to full capacity and first charging of battery while handing over to the department

Also supply of fuel oil to run the genset for a minimum of 8 hours on full load or by using rheostat."F) Battery2Nos 12V 180 AH battery Tools: Supply of tools like 15" cutting plier - 1no, screw driver 9" & 6" - 2no, DE spanners (6Nos) - 1set, Adjustable spanner - 1no, 1/2 lb Hammer - 1no, spanner for removing engine oil plug - 1no, Line tester - 1no for the maintenance and operation of Generator.

Erection of Gen set: Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation for erection of 250KVA Diesel Generator th a minimum height of 3feet from the floor level. (As per quotation)

Supply and fixing of exhaust piping of sufficient length of suitable MS pipe with silencer so as to extend outside the generator with necessary thermal insulation.

Supply erection testing commissioning of 2.00TR (6000 KCal/ Hr) ABS Plastic split type Air Conditioner conforming to IS1391 [Part-2] 1992 with Rotary compressor operating on Non CFC refrigerant suitable for wall mounting for operating on 230V 50HZ single phase AC supply with Three Star rating Model as per BEE Specification and capable of performing the following functions. A) Cooling B) Dehumidifying C) Air circulating"D) Filtering the installation work for the above split type AC units includes the following."1.Mounting/ fitting indoor and outdoor units at their respective locations. 2.Laying refrigerant pipe line of 6mtrs distance and connecting the both units after drilling hole in the wall if required thickness of the copper tubing shall not be less than 0.80mm3.Insulating the suction pipe with expanded polythene foam 5mm thick tubing.

3.Insulating the suction pipe with expanded polythene foam 5mm thick tubing. 4.Laying 15mm dia flexible PVC drain pipe of 6mtrs length to throw out the condensate water being formed in the indoor unit.5.Leak testing the entire gas unit.6.Charging refrigerant gas in the unit. 7.Suitable electric wiring to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit. (Make - Carrier/ Voltas/ Blue star make only)

Supply and fixing of 5KVA Automatic voltage stabilizer of wall mounting type with Automatic time delay switching arrangements suitable to operate on 230V Single phase supply.The installation work for the indoor unit shall include fitting the unit on the false ceiling with anchor fasteners and threaded rods, etc and the outdoor unit on suitable mounting stand with anti vibration mounts. The units shall be charged with non-CFC refrigerant gas and leak tested and commissioned as per the design requirements.

Supply and fixing of MS Stand for fixing outdoor unit.

Supply and laying of 5/8" and 3/8" Copper pipe

RISING MAIN Aluminium: Supply erection, testing and commissioning of 400A 3L+N+PE, Plug in TYPE, 415V 3 Phase and Neutral sandwich Aluminium bus bar rising main indoor type totally dust and vermin proof with Insl F with suitable GI enclosure of 1.6mm thickness with epoxy painting of RAL7032. Rising main shall be provided with double aluminium earth bus bar of capacity as per specification for the entire length and cost of earth bus bar shall be included. short circuited rating of 40KA for 1sec with necessary rigid hanger, spring hanger and wall support hanger. The detailed drawing shall be approved by the department before manufacturing.

Supply, Erection, Testing and commissioning of 400A END Feed unit with 400A 4P MCCB 50kA for 400A Rising mains

Supply and fixing of Flange end for 400A rising main

Supply, Testing0 and commissioning of tap off boxes of the following rising main including interconnecting rising main of 250A 4P MCCB suitable for terminating with 3.5C x 150 sq.mm cable

Design , supply , installation , testing and commissioning of DX 8.5 TR nominal capacity factory assembled Air cooled condensing unit fixed with energy efficient scroll compressor along with grooved copper tube/ aluminium fins air cooled condensor coil with anti corrosion coatings , liquid , accumulator, low noise aluminium propellor condensor fan with fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powder coated as per specifications the unit to include built in safety controls like HP/LP switch power quality protector, in built thermal / temperature protection.Supply ,installation , testing and commissioning of 8.5TR factory assembled double skin AHU with 100mm -45kg/cum PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/ forward curved centrifugal fan

with EFF1 rating motor, drive arrangement with taper lock pulleys for fan and motor, vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 Micron and 5 Micron, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins, GI mist arrestor, condensate coil trough with SS-304-20G insulated with 9mm closed cell elastomeric foam,

guard for inspection door, out let damper of aerofoil blades & PVC gears, and flexible fire retardant canvas complete with galvanized hardware. Each of the cooling coils will have independent distributers, electronic expansion valve kit, catch all drier, independent DX coil circuit to connectivity to each ODU circuit. Appropriare devices to be installed to monitor the Temperature, Humidity and Diff. Pressure inside the Operation Theatre. (Carrier/ Voltas/ Bluestar make/ Equ.) (SR)

Design , supply , installation , testing and commissioning of DX 5.5 TR nominal capacity factory assembled Air cooled condensing unit fixed with energy efficient scroll compressor along with grooved copper tube/ aluminium fins air cooled condensor coil with anti corrosion coatings , liquid , accumulator, low noise aluminium propellor condensor fan with fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powder coated as per specifications the unit to include built in safety controls like HP/LP switch power quality protector, in built thermal / temperature protection.Design , supply , installation , testing and commissioning of DX 5.5 TR nominal capacity factory assembled Air cooled condensing unit fixed with energy efficient scroll compressor along with grooved copper tube/ aluminium fins air cooled condensor coil with anti corrosion coatings , liquid , accumulator, low noise aluminium propellor condensor fan with fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powder coated as per specifications the unit to include built in safety controls like HP/LP switch power quality protector, in built thermal / temperature protection Supply, installation, testing and commissioning of 5.5TR factory assembled double skin AHU with 100mm -45kg/cum PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/ forward curved centrifugal fan with EFF1 rating motor, drive arrangement with taper lock pulleys

for fan and motor, vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 Micron and 5 Micron, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins, GI mist arrestor, condensate coil trough with SS-304-20G insulated with 9mm closed cell elastomeric foam, guard for inspection door, out let damper of aerofoil blades & PVC gears, and flexible fire retardant canvass complete with galvanized hardware. Each of the cooling coils will have independent distributers, electronic expansion valve kit, catch all drier, independent DX coil circuit to connectivity to each ODU circuit. Appropriare devices to be installed to monitor the Temperature, Humidity and Diff. Pressure inside the Operation Theatre. (Carrier/ Voltas/ Bluestar make/ Equ.)

Supply and fixing of Laminar Air flow Plenum for SS304 - 1.0 mm Thich casing, Mini Pleat Hepa Filters for 100mm Thick- Flange type, OT Pendant Light provision for 600X600, With SS304-1.2mm Thick perforated sheet. PLENUM SIZE: 1800L X 2400W X 350H High Efficiency particulate Air (HEPA) filter specification: Filter Size : 8 feet x 6 feet x 1 feet Classification : H-13 Construction :Panel Type Efficiency :99.97% Optical efficiency at .3 micron Cleanliness level: Class 100 As per NABH Standard Spacers: Aluminium Initial pressure drop:25 mm W.C Final pressure drop : 75 mm W.C Duct holding capacity:4750gm/Sq.mtr Framing :Aluminium (Box type) Washable : No Test reports to be furnished from approved Government External Quality Assurance Lab/ Agency to meet the testing parameters after commissioning of the AC system with HEPA filter as per NABH standards. (SR)

Supply and filling of non-CFC Refrigerant Gas.

Supply & fixing of hard drawn copper Refrigerant piping of suction line of Size 7/8” inches with necessary fitting and clamp etc

Supply & fixing of hard drawn copper Refrigerant piping of liquid line of size 5/8” inches with necessary fitting and clamp etc…

Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads, with ceiling Support angle rods etc

Supply and fixing of 50mm thick anti vibrating rubber pads

Supply, Fabrication and Installation of 22 G Aluinium Sheet Ducting for both suction and Return arrangement insulate with for Operation Theatres with inter linking arrangements with necessary angle supports, anchor fasteners and threaded rods etc... as required.

Supply and Providing Thermal Insulation of 9mm thick Class ‘O’ Fire Retardant –XLPE with aluminium foil.

Supply & fixing of Acoustic insulation for Supply air duct using 10 mm thick class 1 rating Open cell nitrile rubber /XLPE insulation.

Supply and fixing of powder coated Extruded aluminium supply air grilles/diffuser with MS volume control damper for supply.

Supply, fabrication and fixing of Volume control dampers individually across the duct.

Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required

Supply, fabrication and fixing of suitable MS angle support frame for mounting the out door Units

Supply, fabrication and fixing of suitable MS angle support frame for mounting the in door Units.

Supply and providing civil concrete block for mounting the air coditioning unit

Supply and providing of pipeline nitrile rubber insulation for suction line Refrigerant pipe as required.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/ supports on wall/ floor/ ground for earth connection.

Preparation of site plan, physical layout, electrical line schematic diagram in 10 sets getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining safety certificate preparation of 1 set of approved drawing and acopy of safety certificate in a neat frame work to be fixed in generator room and payment of CEIG inspection fees.

Supply and erection of 315 Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG CRCA sheet for outer body,stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and horizontal no of switches side to side on both sides of bus bar chamber with cable chamber of the extreme right end and top of Panel with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2nos metallic danger board affixed complete on suitable base channel supports on 6Nos of 0.45m channel legs to satisfy the latest CEIG rules with the following switches conforming to IS specifications.

The incoming and outgoing switches should be connected to the bus with the following copper flats.1) 315A FP switch with 1 1/4" x 1/4" tinned copper flat 2) 100A TPN switch with 1 " x 1/8" tinned copper flat.3)200A TPN switch with 1 " x 1/8" tinned copper flat 3) 63A TPN switch with No.8 SWG copper wire The switches should be separated from the bus bars by 6 mm thick hylum sheet and all switches should be properly earthed by solid copper flat as per IE rules and CEIG specification. Providing Rubber Beading for All Doors

Supply and erection of 250 Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG CRCA sheet for outer body,stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and horizontal no of switches side to side on both sides of bus bar chamber with cable chamber of the extreme right end and top of Panel with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2nos metallic danger board affixed complete on suitable base channel supports on 6Nos of 0.45m channel legs to satisfy the latest CEIG rules with the following switches conforming to IS specifications.1)250A FP Switch Disconnector Fuse Units interior only with HRC Fuses Double Break -1 No as Incoming2)125A TPN Switch Disconnector Fuse Units interior only with HRC Fuses Double Break -2Nos as Out going

The incoming and outgoing switches should be connected to the bus with the following copper flats.1) 250A FP switch with 1 1/4" x 1/4" tinned copper flat 2) 125A TPN switch with 1 " x 1/8" tinned copper flat 3) 63A TPN switch with No.8 SWG copper wireThe switches should be separated from the bus bars by 6 mm thick hylum sheet and all switches should be properly earthed by solid copper flat as per IE rules and CEIG specification. Providing Rubber Beading for All Doors

tinned copper flat to provide earth connection to the cubicle switches cable glands etc., the bus bars should be supported on synthetic enamel compound at equal interval as per IS specification. The switches should be separated from the bus bars by 6 mm thick hylum sheet and all switches should be properly earthed by solid copper flat as per IE rules and CEIG specification. Providing Rubber Beading for All DoorsThe incoming and outgoing switches should be connected to the bus with the following copper flats.1) 250A FP switch with 1 1/4" x 1/4" tinned copper flat 2) 125A TPN switch with 1 " x 1/8" tinned copper flat 3) 63A TPN switch with No.8 SWG copper wire

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connectioN sd 371

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Goods/Service Lift : Design, Engineering Supply, fabrication, erection, testing, Commissioning and handing over of 1No. Goods/Service lift as per following Technical Specification. 1. Type of Lift : Goods/Service Lift. 2. Capacity of Lift : 500Kgs. 3. Speed : 1 Metre / Sec. 4. Type of Drive : VVVF Drive 5. No. of Floors : G +3 Floors. 6. Total Travel : 16 Metres. 7. Over Load warning Indicator and fireman’s Switch to be provided. 8. Design of Car : Stainless Steel Door fire rated. 9. Position of Machine : Directly above the lift shaft. 10. No. of Landing Entrance : front & Back Total 4 Nos. 11. No. of Car Entrance : Two. 12. Car Entrance Door : Two Doors.

13. Landing Entrance Door :V3F Door Stainless Steel 1.5mm Hairline finish. 14. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year. 15. Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any anf obtaining CEIG safety certificate as per lift act. 16. Special Feature: (a). “UP and DOWn arrows in landings only. (b). Steel Cubical for Controller. (c). M.S. Door frames for Landing Entrance.

17.Supply of Operation and Maintenance manual with necessary tools for operation. The list of Tools should be furnished by the contractor in a separate sheet duly signed. 18.Other Standard Features: Phase failure and phase reversal relay, T-guide brackets for car and counter weight, rubber padding under winding unit, Motor of adequate capacity single reduction warm gear, electro mechanic brake with compression springs with car safety gear, buffer machanical door locks, emergency key, side supporting angles motor over load protection devices. Final limt switch, main suspension ropes, counter weights, lifting joist for mounting the machineries. AUTOMATIC RESCUE DEVICE:To facilitate landing of lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, inverter, under voltage protection system etc. complete with all accessories.

SRI ANNAMAAR AND CO (BID ID -1249870)

A & A BUILDERS AND PROMOTERS (BID ID -1249767)