DEPOSIT RENOVATION WORKS FOR RI CENTRE MALIKADAV KOZHIKODE Work General Civil Work

15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet

2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

16.91.2:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

OD18286/2024-2025:Providing and fixing cubicle partition with staff table made with 19 mm thick marine plywood of IS 710 , Cubicle partition frame work of 19mm marine plywood making in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) fixing with 4 mm thick Teak Veneer, fixing on floors with necessary screws finishing, using synthetic adhesives, top of cabin is fixed with 8 mm thick toughened clear float glass with polished edges over partition. Staff table made with 19 mm thick marine plywood fixing with 4 mm thick Teak Veneer using synthetic adhesives including drawers, cupboards, keyboard tray with heavy duty telescope sliding channel of approved make, group lock / S.S. handle. Top of table is fixed with 8 mm thick toughened clear float glass with polished edges. Veneer to be provided only on visible surface, all the surface without veneer shall be polished/painting etc, including all other fittings all cost of materials all labour charges etc complete (measurement taken top of the table surface only).

OD18287/2024-2025:Melamine polishing on wood work ( two coat)

OD18288/2024-2025:Engaging man mazdoor for shifting files and office furniture etc complete

17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps