ADDN ALTERATION TO BLDG NO P 21 IMPROVEMENT TO CERTAIN SMQS SPECIAL REPAIR REPLACEMENT OF JOINERIES AT CERTAIN SMQs and ADDN ALTERATION TO CERTAIN STORAGE SHED AT AF STN DIGARU

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Fixing only collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specfied and directed.

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters ( without taking off shutters from the frame or chowkats) complete, all as specified and directed by Engineer in Charge.

Ditto but exc 1.5 sq.m and n exc 4 sq.m each but with shutters ( without taking off shutters from the frame) complete, all as specified and directed by Engineer in Charge.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and as directed.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in CM (1:4) complete all as specified and as directed

Excavation in trenches n exc. 1.5 m wide and n. exc. 1.5 m depth for foundation etc. n. exc. 10 sqm on plan and getting out in soft loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in hard dense soil.

Removing excavated soil n exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point.

M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat rough finished surface of concrete complete all as specified and as directed.

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions, square, rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.for flat rough finished surfaces complete all as specified and as directed.

Formwork to chullah hoods, cha jjas, troughs and similar items in cluding edge,flat for rough finished surface of concrete

M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC M-25 disgn mix using 20 mm grade stone aggregate as in Columns, pillars, piers,posts and struts

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in chajjas.

M&L brick work with sub class 'B' bricks strait or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and as directed.

M & L for 20mm thick rendering in CM (1:4) in external surfaces of wall finished even and fair without using extra cement.

Supply only Liquid water proofing compound

M&L for rendering 15 mm thick in CM (1:6) on internal surfaces of wall .

S&F aluminium anodised powder coated (min thickness 50 micron) frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specifed and directed

S&F Aluminium anodised powder coated window shutter, fixed type without sash bar, alumn section section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,incl suitable locking systems etc complete all as specifed and directed

S & F 5 mm thick glass sheet ordinary quality, in square n exc 0.5 Sqm in each pane, fixed with aluminium beading in aluminium window/ventilation etc all as specified and directed.

S & F anodised aluminium grill (anodised transparent or dyed to require shade according to IS -1868 with minimum anodic coating of grid AC-15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requiremnet and direction of Engineer-in-Charge

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium anodised fillets with screws complete all as specified.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4).

Spreading and levelling in layers n exc. 25 cm thick including well ramming including watering as required complete all as specified and as directed.

M&L for 25 th plain cement concrete type B-1, 1:2:4 (20 mm graded aggregate) for laying in floor finishes.

M&L for 75mm thick plain cement concrete (1:4:8 type D2(using 40 mm graded stone aggregate) as in sub base of floor.

Sand filling under floors or in foundations including watering and consolidation

M&L for Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for plain cement concrete type C-2, 1:3:6 (using 40 mm graded aggregate) 75 mm th as in plinth protection & path finished surface fair and even without using extra cement cement including mastic filling in construction joints with 1 part of bitumen and 3 part of sand by weight complete all as specified and directed.

M&L for providing 40 mm thick cement concrete type B0,1:2:4 (using 12.5 mm aggregate) using water proofing compound as per manufacturer instruction (WPC shall be measured and paid separately) in damp proof course to horizontal or vertical surfaces including necessary formwork.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-290 (Gde E-165) complete all as specified and as directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10cm in width or girth not otherwise described

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M &L for preparation of new steel surfaces and applying two coats of black bituminious paint exceeding 10cm in width or girth all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F 150 mm aluminium alloy handels cast/plate type

S/F Aluminium alloy, anodised, sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on the both side complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed.

Supply and fix 30mm thick single piece, coloured ABC (ACRYLONITRILEBRUTADINE STYRENE) coated, PUF filled door shutters with PUF (PolyUrethane Foam) insulation of minimum density 40 Kg/Cum filled in betweentwo ABS sheets of thickness 1.2mm (min), border covered within situpasted ABS strips of width equal to thickness of door shutters, 1.2mmthickness, reinforced with two number 10mm CTD bars, pre-embedded withwooden blocks of suitable sizes for receiving hinges, tower / sliding bolts,towel rails, handles etc, with/without embossed pattern.

M & L for 15mm thick rendering in CM (1:4) on external surfaces of wall complete all as specified and as directed.

M&L for preparation of newly plastered surface and applying two coat of Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as per manufacturer instruction.

M&L for preparation of newly plastered surface and applying 02 two coat of oil bound distemper over a coat of alkali resistant primer including1.5 mm thk wall care putty complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work main Tee & cross Tee size 25.40X25.40X1.63 mm supported at ends with 38.10X25.40X1.32 mm forming grid 600x600 mm for false ceiling, suspended with 6 mm GI wire , (upto 1200mm length). Adjusting level fixed to roof slab by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5mm dia 40 mm long complete all as specified and directed.

M&L for 6mm thick non Asbestos fibre cement building boards , fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed

M&L for preparation of new ceiling surfaces and applying two coat of oil bound distemper complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position, surface channels not otherwise specifically provided for complete all as specified and directed

M&L for Cement concrete work in pavement / hard standing of flexural strength 40 Kg/ square centimeter in field, using 400 Kg of cement per Cum thickness of concrete 25 cm or less including use of form work all as specified and directed.

S&F stainless steel turbo ventilator of size 20 to 25 inch weight 1.4 Kg suitable for wind speed 6 km/h-20 km/h with polycorbonate base complete all as specified and as directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed

S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-290 (Gde E-165)

M & L for 12 mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube Supplying & Fixing in opening as per specification and drawing,incl making good (such as rendering and white wash matching to exixting surface) to the existing surfaces complete all as specified and directed

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing shown on page -156 of MES SSR Pt-II complete all as specified and directed

S&F aluminium anodised barrel tower bolt of extruded section 125 mm long complete all as specified and directed.

S/F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 100mm stainless steel butt hinges

S & F 75mm stainless steel butt hinges

S&F 125 mm aluminium alloy handels cast/plate type

S & F floor door stopper of aluninium alloy body and tongue, anodised 150mm long with hard drawn steel spring, fixed in floor.

S/F 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pgment to match with shade of granite all as directed.

S&F of 4 mm thick frosted glass, cut to shape and size n exc. 0.50 sqm in each pane fixed in aluminium frame or louver.

S&F decorative type 20 mm dia curtain rod , anodised aluminium alloy with fixing brackets,stops, rollers etc complete all as specified and as directed.

M&L for preparation of newly plastered surface and applying two coat of oil bound distemper over a coat of alkali resistance primer over 1 mm thick wall care putty complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and Labour for point wiring with FRLS PVC insulated, unsheathed, stranded copper conductor cable single core 1.5 Sqmm for one light point or one fan point controlled by one one way switch incl one PVC insulated, un-sheathed single core stranded/solid copper conductor cable of size 1.5 Sqmm for continues earth wire drawn in and including PVC casing caping heavy duty (20/25 mm) complete with all accessories including sheet metal MS box of suitable size of 1.2mm thick incl 3.0 mm thick laminated sheet cover and fixed with brass screws, cap washers etc or PVC rectangular switch board of suitable size to be fixed flushed on wall including white washing/colour washing/distempering to match the disturbed surfaces all as specified & directed.

All as per Srl Item No. 85 here-in-above but for one 6A socket outlet on same board.

All as per Srl Item No. 85 here-in-above but with 1.5 Sqmm single core copper conductor for one 6A socket outlet on independent board.

All as per Srl Item No. 85 here-in-above but with 2.5 Sqmm single core copper conductor for one 16A socket outlet on independent board.

All as per Srl Item No 85 here-in-above but with 2.5 Sqmm single core copper conductor for one 15A socket outlet on independent board.

Supply and fix switch piano flush type, single pole, one way, 6 Amps 230 volts complete all as specified & directed.

Supply and fix Socket outlet, 3 pin 6 Amps flush type universal .

Supply and fix Switch Socket Combination 2 in 1, 3 pin 6 Amps flush type universal.

Supply and fix Switch Socket Combination 2 in 1, 3 pin 6/16 Amps flush type universal.

Supply and fixing in repair ceiling rose, surface bakelite 65x50 mm three terminal.

Supply and fixing in repair stepped type electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as reqd

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection alongwith bracket for fixing of security light fitting made with 32 mm dia light grade GI pipe (not less than 1 Mtr long) with and including MS clamp and two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor.

Supply and fixing of MCB SPN DB, 12 way made of sheet steel phosphatised, powder painted with 200Amps rated busbar, neutral link, earthbar and Din rail, 230 Volts with Double door complete all as spepcified.

Supply, fixing, connection and testing MCB SPN 240 Volts, 'C' series, breaking capacity 10kA of rating 6-32Amps.

Supply, fixing, connection and testing MCB SP, 240 Volts, 'C' series, breaking capacity 10kA of rating 6-32 Amps.

M & L Submain wiring with two single core multistranded FRLS copper conductor of size 4.0 Sqmm for phase & neutral and one single core multistranded/ solid copper conductor of size 4.0 Sqmm for continuous earth wire (2x4.0 Sq.mm + 4.0 Sq.mm) both PVC insulated & un-sheathed drawn through and including heavy duty stove enamelled steel conduit of 20/25 mm dia complete with all accessories or to be fixed on wall respectively including white washing/ colour washing/ distempering to match the disturbed surfaces complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead wire 4.0 mm dia , by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 32mm bore light grade from earthing test point or main controling switch as directed including providing funnel with 20mm bore GI pipe light grade, wire mesh, charcoal or coke andcommon salt in alternative layer of 15 cm (compactedd thickness) all round the earth electrode, concrete earth pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 50mm thick cover of RCC (1:2:4) (re-inforced with 8mm dia TMT bar @15 cm C/C bothways and MS bar handle made of 10mm dia bar) including necessary earth work in excavation, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 3 of MES Schedule Part-I including earthing pit cover etc. complete all as specified & directed.

Supply and fixing 1x 150W, 220V, AC hanging type energy saving, environment friendly & robust mediumbay /highbay LED luminaire with high efficacy (100 lm/W) with toughened glass, prewired drivers, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make :- Havells Cat Part No GAZELLAHBP150WLED857PBOTG or equivalent approved make.

Supply and fixing round shape 15 watt, 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply & fix Air Circulator fans 230 volts single phase oscillating 750 mm sweep suitable for wall mounting.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20A.

Taking down old unsv MCB SPN/TPN distribution boards and making good the disturbed surfaces.

Supply and fixing double door MCB TPN DB, 4 Way, vertical type, made of sheet steel phosphatised, powder painted with busbar, neutral link, earthbar and Din rail, 415 Volts complete all as spepcified.

Supply, fixing, connection and testing MCB TPN 415V, 'C' curve series, breaking capacity 10kA of rating 40-100Amps.

Supply and fixing of MCB SPN DB, 8 way made of sheet steel phosphatised, powder painted with 200Amps rated busbar, neutral link, earthbar and Din rail, 230 Volts with Double door complete all as spepcified.

Supply and fixing of MCB SPN DB, 4 way made of sheet steel phosphatised, powder painted with 200Amps rated busbar, neutral link, earthbar and Din rail, 230 Volts with Double door complete all as spepcified.

Supply, fixing, connection and testing MCB SPN 240 Volts, 'C' series, breaking capacity 10kA of rating 40-63Amps.

Taking down old unsv submain wiring any any size.

Taking out old unsv underground cable of any size & any type.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric, power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm x 3.5 core.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric, power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm x 3.5 core.

M & L sand coushioning to UG cables (8cm deep before laying of cables and 15 cm over the cable) including spreading, levelling, well ramming in layers. NOTE:- Punned thickness of 18cm only will be considered for payment purpose.

Supply and fix sub class 'B' bricks of standard size for cable protection in trenches/ all as specified and directed.

Supply and fixing GI tubing light grade 50mm dia for protection pipe complete all as specified and directed.

K K Construction Co (BID ID -3066716)