Restoration of rain damages to LWSS Lakhred Phanehal (SH. Providing laying jointing and testing of 20 mm dia and jacketing of storage tank) under PDNA

20 mm nominal bore. (PN 16/SDR 7.4)-3 Layer

15mm thick cement plaster in single coat on rough side of brick /stone /concrete walls for interior plastering upto floor two level I/c arrises, internal rounded angles, chambers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar1:4 (1 cement :4 sand)

15mm thick cement plaster in single coat on Fair side of brick /stone /concrete walls for interior plastering upto floor two level I/c arrises, internal rounded angles, chambers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Inc.m.1:3.

Pointing on existing stone masonry in cement mortar 1:3 ,including raking out old joints to required depth,cleaning,washing and wetting the jonts ,filling with cement mortar and finishing complete within all leads and lifts as per the directions of Engineer-in-charge.

Applying Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose material & other foreign matter as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead and lift.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with readymixed prime as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling

Providing and laying Duro stone vetrified tiles (600x600mmx10mm) of Nitco/Kajaria/Johnson Make in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement: 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.