Repairing and Maintenance Work Of Other Municipal Buildings In T.P.S. No. 39 ( Limbayat-Udhana),TPS no 40 ( Limbayat - Dindoli ) And T.P.S. No.19 (Magob) In South East Zone (Limbayat), Surat.

Name Of Work :- Repairing & Maintenance Work Of Other Municipal Buildings In T.P.S. No. 39 ( Limbayat-

Udhana),TPS no 40 ( Limbayat - Dindoli ) And T.P.S. No.19 (Magob) In South East Zone (Limbayat), Surat.

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

(A) Demolition Items

1 Demolition including stacking of serviceable materials with all

lead and lift. (i)) RCC Work

2 Demolition of brick work and stone masonry including stacking of serviceable

materials and disposal of unserviceable materials with all lead and lift. (i) On 10.00 550.40 C.M.

3 Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift.

4 Dismentling steel work including distempering and stacking

the maerials with all lead and lift.

5 Dismentling door, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraces, holdfasts and other attacement etc. complete and stacking

them within all lead

and lift. (i) Not exceeding 3 Sq.M. in area.

6 Dismentling door, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraces, holdfasts and other attacement etc. complete and stacking

them within all lead

and lift. (i) Exceeding 3 Sq.M. in area.

7 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materials and disposal of unserviceable materials with all lead and lift. 5.00 47.72 S.M.

(i) G.I. sheet roofing.

8 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.

(A) Kota stone flooring and steps 30.00 47.72 S.M.

(B) Marble 30.00 47.72 S.M.

('C) Tiles flooring / Dedo 30.00 47.72 S.M.

(D) Granite flooring and steps 30.00 47.72 S.M.

9 Dismentling C.I. pipes G.S.W. pipes and A.C. rain water

pipes with fittings and clamps including stacking the materials with all lead and lift.

(for any dia, of pipe)

(A) GI pipe (15mm) 10.00 74.77 Rmt.

(B) GI pipe (25 mm) 10.00 74.77 Rmt.

('C) GI pipe (32 mm) 10.00 74.77 Rmt.

(D) GI pipe (40 mm) 10.00 74.77 Rmt.

('E) GI pipe (50 mm) 10.00 74.77 Rmt.

(F) UPVC pipe 10.00 74.77 Rmt.

10 Dismentling wood work, wrought framed and fixed in frames trusses including

stacking the materials with all lead and lift.

11 Dismentling barbed wire in fencing including making rolls and also including

dismentling fencing posts including all earth work concrete in base and making

good the disturbed fround stacking useful materials as directed and disposing as 5.00 66.81 Rmt.

directed and disposing of the unserviceable materials with all lead and lift.

12 Dismantling sanitary fittings like wass basin, W.C. pan Indian and European type,

flushing tank etc. including stacking the materials with all lead and lift. 5.00 405.65 Each

(B) Civil Items

13 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Manual Labours

(1) Up to 1.5 Mt. depth 5.00 203.83 C.M.

14 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the

surplus excavated soil as directed within a lead of 50 M. For following diameter

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

15 Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded stone

agg. 40 mm nominal size) & curing comp. excl.cost of form work in

(A) Foundation and Plinth

16 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m

Nominal size)&curing comp. excl. cost of form work in :(a) foundation & Plinth 5.00 3,005.76 C.M.

17 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in :

(A) Foundation, footing, Base of columns and Mass concrete.

18 Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each 15.00 130.39 C.M.

disposited layer by ramming and watering.

19 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 10.00 289.06 C.M.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted

thickness over the base including necessary compaction, watering etc. complete.

Item includes leveling by using vibratory plates compacted 5.00 413.09 C.M.

machine and as directed by engineer in charge.

20 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc. comp.

Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 s.mt 2.00 12,632.60 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt 2.00 11,166.97 C.M.

(1)Having c/s area up to 0.08s.mt 2.00 9,102.61 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m 2.00 8,174.41 C.M.

(C) LINTELS 2.00 9,531.24 C.M.

(D) CHAJJAS 2.00 5,512.83 C.M.

(E) Vertical and Horizontal Fins 2.00 10,831.75 C.M.

21 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m

Nominal size)& curing comp. incl. cost of from work in: wall caps/ copings. 5.00 3,982.62 C.M.

22 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl.

bending, binding & placing in position etc.comp.---Ground Floor 100.00 76.21 Kg.

23 Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) 25.00 4,511.97 C.M.

24 Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse 25.00 678.86 S.M.

sand ) (C)Fly Ash Bricks

25 Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces 20.00 189.79 S.M.

(B) For ceilings &soffits of stairs 50.00 214.60 S.M.

26 20mm thick sand faced cement plaster on walls for height more than

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- sand) etc.

27 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp..

28 Providing 20 mm deep finished groove in plaster in line and level etc. Comp.

For all Floor (M.R.)

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

29 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey 100.00 989.45 S.M.

cement slurry mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

30 Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with 100.00 1,076.94 S.M.

pigment to match the shade of slab including rubbing and polishing etc.

31 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand) finished 150.00 857.42 S.M.

with flush pointing in white cement etc.com. For all floors

32 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps & dado

on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement paste for 150.00 887.64 S.M.

fixing and joined with white cement slurry etc. complete. For all floors

33 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing 150.00 914.69 S.M.

with flush pointing in white cement.

34 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white 150.00 987.86 S.M.

35 Providing & laying marble stone slab flooring over 20 mm.av. base of C.M.1:6

( 1 cement :6 coarse sand ) & jointed with grey cement slurry incl. rubbing & 15.00 2,139.56 S.M.

polishing comp.(A) Marble slab 25 mm. Thick.

36 Providing & laying granite slab 18mm thick in flooring, treads of steps and

landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse

sand) or lime mortar 1:1.5 laid and finished with flush pointing in white or colour 100.00 2,410.00 S.M.

cement including rubbing and polishing complete. ( Basic Rate:-

37 Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid

on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with nessary

adhesive material and finished with flush pointing in white or colour cement, 25.00 2,449.00 S.M.

including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

38 Labour Charges For Edge Finished For Granite 25.00 43.43 Rmt.

39 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson,

Nitco, Somani, Bell, Asian or Euro make in flooring,treads of steps & Landing

laid on bed of 20 mm (Average) base of cement mortar 1:6 (1 Cement :

Coarse sand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with colour cement slurry

including finished with flush pointing & cleaning the surface etc. comp.Size 24"

For Antiskid tiles

40 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :

coarse sand) finishing with flush pointing in white cement.

41 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and 150.00 1,081.71 S.M.

jointed with white cement slurry.

42 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :

coarse sand) finishing with flush pointing in white cement.

43 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and 0.00 1,538.85 S.M.

jointed with white cement slurry.

44 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 course sand :

graded stone aggregate 20mm nominal size) laid in one layer finished with a

floating coat of neat cement

(A) 40mm thick 5.00 303.84 S.M.

(B) 50mm thick 5.00 356.33 S.M.

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

45 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water

proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The laminate shall be as per approved

shade & texture, of make incl. Sal wood frames of finished size 12cm x 7cm.incl. S.S.

Hinges with nessary screws & Anodized aluminum fixtures & fastenings For all Floor

46 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water

proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The laminate shall be as per approved 20.00 2,520.00 S.M.

shade & texture, incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

47 Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows &

clearstory windows incl. Indian teak wood frames of finished size 12cm x 7cm.incl.

anodized aluminum fixtures & fastenings incl. Primer coat of approved quality &

two coats of oil painting etc. For all Floor

(A) Fully Panelled 10.00 5,533.68 S.M.

(B) Partly Panelled and Partely Galzed 0.00 5,185.03 S.M.

(C) Fully Galzed 0.00 4,551.69 S.M.

48 Providing and fixing 35mm thick shutters for Doors, windows and clearstory

windows including anodised alluminium butt hinges with necessary screws. (A) 20.00 3,941.37 S.M.

Indian teak wood. (i) Fully Panelled.

49 Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter

with wood grain raised panneled design finish shutter having extra reinforcement

on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ along with embedded wooden pieces

for stiffening & also taking hinges & fixtures. The whole FRP frame & shutter is to be 25.00 2,019.98 S.M.

water proof weather proof, termite proof &resistance to mild acid/alkali. Rates are

to be inclusive of S.S.hinges with fastener sleeve & alluminium fixtures &

50 Providing and fixing FRP of 35mm thick Fiber Glass shutter with 1.5 to 2.0 mm thick

fire retardent grade FRP skin in depressed panel design having extra reinforcement

on sides & edges & in Gel coat finish. The core of the shutter is to be filled up with

injected retardent grade polyurethane foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame 25.00 1,269.63 S.M.

& shutter is to be water proof ,weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings.

51 Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc.

At all floor levels with M.S. flats at required spacing & frame around square

or round bars with round headed bolts & round headed bolts and nuts or by 1,500.00 104.20 Kg.

screws incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all Floors

52 Providing & fixing in position collapsible steel shutters with vertical channels

20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size with top &

bottom rails of T-iron 40x40x6mm. with 38mm dia. steel pulleys comp. with

bolts, locking arrangements, stoppers, handles incl. applying a priming coat of

Redlead paint etc. comp.

53 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe

with hooked ends to RCC slabs curing, layig including painting the exposed 50.00 129.02 Each

portion of loops, all as per standard design complete.

54 Providing and filling in depressions of Bath and W.C. At all floor levels, after

completing plumbing work of pans, pipes,traps etc.with cinder or fly ash as

directed by Engineer in charge etc. comp..

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

55 Providing and laying water proofing treatment to vertical and horizontal surfaces

of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

56 Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound comforming to IS:2645 over

the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally 50.00 511.00 S.M.

covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special water

proofing compound confirming to IS:2645 & top smooth finished with trowel with

false chequered marking of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of about 300 mm in a

shape of quarter round vata Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

57 Providing & fixing at all floor levels,both face polished machine cut edge green

kota stone slab (30mm) for urinal partition joined with grey cement slurry (1:1) 50.00 900.00 S.M.

incl. Rubbing & polishing etc. complete. (M.R.)

58 Providing & fixing at all floor levels,both face polished machine cut edge Marble

slab for urinal partition joined with grey/White cement slurry (1:1) incl.

Rubbing & polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

59 Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or

angle cleats as in main & cross beams,hip & trussed purlins connected to

common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 5.00 9,047.86 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 5.00 9,711.53 Qtl.

60 Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with nuts,

bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per relevent IS

specification & directed by engineer in charge. (TATA or Jindal 50.00 311.00 S.M.

61 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing with

necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.) pins,

hooks, excluding M.S. angles etc. complete as per relevent IS specification.&

directed by engineer in charge

62 Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet

mm. thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm dia

with bituman and impet washer filled with white lead etc. Excluding the cost of 25.00 999.00 S.M.

purlins rafter and trusses. (Tata / Jindal or equivalent)

63 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins,

Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal or

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

64 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins, 25.00 1,016.00 S.M.

Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or equivalent)

65 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet

class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc.

including marking necessary connection with rain water pipes. 10.00 561.27 S.M.

(i) 0.8 mm thick

66 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L"

hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer

complete (1) 0.80 mm thick

67 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet

class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc.

including marking necessary connection with rain water pipes. 10.00 412.00 S.M.

(i) 0.63mm thick

68 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I.

"J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer 10.00 464.00 S.M.

complete (1) 0.63mm thick sheet

69 Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main

cladding on both edges. All fixing holes must be predrilled oversize as specified for

the sheet length and fastener being used. Fasteners must be fitted with approved

washers. Fixings should be tightened to ensure a weatherproof seal but they must

not be over tightened Side-lap fasteners must also be installed at specified centers

with the FRP sheet having clearance holes provided as per the main fasteners

Weatherproofing shall be provided at all flashing points under the normal flashing

by the fitting of a foam closure strip to match the profile being used. Closure strips

will be sealed to the sheet with an appropriate non setting silicone sealant.

Excluding the cost

of purlins rafter and trusses.

70 Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is coated

with an anti-UV Co-extrusion layer having good weather resistance, it can maintain

its optical properties and mechanical performance for a long time. Fasting is usually

done by screws. , The fastening screws should be inserted about 500 mm apart and

300mm apart Along the supporting internal purlin and edge pulin.All fixing holes

with diameter at least 2 mm larger than screw must be predrilled into each screw

location. The screws should be 6mm diameter with length according to sheet

thickness and corrosion resistant, with at least heavy duty hot dripped galvanized

or stainless steel. Excluding the cost of purlins rafter and trusses.

71 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by welding 25.00 750.00 R.M.

rereting etc. (a) Medium duty "B" Class

72 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by welding 25.00 485.00 R.M.

rereting etc. (a) Medium duty "B" Class

73 Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to 18 mm

th.ply (using IS 710 Marin ply) with 1 mm thick outside green board & 0.8mm

backside white laminate & with good Quality of adhesive with

appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx 50mm

size, rubbing & sanding comp., as per instruction of Engineer in charge (M.R.)

74 Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick with

appropriate fittings and Alluminium fittings comp., as per instruction of 0.00 4,230.00 No.

Engineer in charge (M.R.)

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

75 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless

steel nuts and bolts complete, i/c fixing the railing with necessary accessories

& stainless steel dash fasteners , stainless steel bolts etc., of required size, on

the top of the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-incharge, (for payment purpose only weight of stainless

steel members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.).

76 Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC

pipes including the cost of cutting holes & making good the wall etc. Complete -

mm dia as per architect instructions.

(D) 150 mm to 200 mm dia 10.00 98.00 No.

77 Providing and constructing sandwitch type Polish Kota Stone cooking platform

0.6 mt. wide & 0.75 mt. height, including one end side Polish Kota stone (Double

Polish) of 1.25 mt. height & front Polish Kota stone patti of 10 cm wide, vertical

partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing

smooth with cement slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt

size of approved quality and make with required all fitings & fixitures etc. comp

as per instruction given by site in charge at all floors.

78 Providing and constructing sandwitch type Granite stone cooking platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone (Double Polish)

of 1.25 mt. height & front granite stone patti of 10 cm wide, vertical partitions

of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing

smooth with cement slurry as required and Stainless Steel sink of

0.45 mt x 0.45 mt size of approved quality and make with required all fitings & 10.00 3,128.00 Rmt.

fixitures etc. comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

79 Providing and filling Epoxy grout of approved or suggested brand by

consultant / Engineer in charge in 4mm to 6mm thick tiles joint including 10.00 40.00 Rmt.

spacer with cleaning of joint by vacuum or blower etc

80 Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments, tools,

material, labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The rate shall

also include cost of drilling of hole of required diameter and depth as

mentioned in manufacturer's specification, cleaning the hole with required air

blower and other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary scaffolding, staging,

labour, tools and equipments, etc. complete as directed by the engineer-in-

81 Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting,

Welding & Fixing in position Purlin, Main Chord etc. as per Engineerin-charge.TATA 10.00 126.00 Kgs.

/ JINDAL / ASIAN Make

82 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar

1:1 including neat cement finishing, watering etc. complete. 10.00 23.68 Rmt.

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

83 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x

380mm) purchased from SMC's approved paverblock manufacturer & setting in

line, level and in truly vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part 50.00 228.00 Rmt.

of coarse sand) including watering etc. complete and

as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 50.00 274.00 Rmt.

84 Providing interlocking type Rubber moulded cement concrete paver block of

approved shape, design & colour having 60mm thickness (M-35) purchased from

SMC's approved paverblock manufacturer only & fixing of fine sand bedding. Item

includes levelling by using vibratory plates compacted machine. Item also includes 50.00 524.00 S.M.

all materials, labour, equipments, tools, plants, watering, cleaning etc. complete.

(With colour/Without Colour)

85 Providing & laying Granular sub base (GSB)confirming to Grading-V of Table

400.0 of compacted thick of 150mm with specified graded stone metal and sand

mixed in place and laid with mechanical means spreading with motor grader

and compacting with vibratory roller having minimum 80-100 KN static weight 50.00 1,418.04 C.M.

to acheve desired density of 98% of MDD including all material, labour,

machinery with all leads and lift etc. complete.

86 Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size) & Vaccuum Dewatering technique

including floating surface with a skim powder floater, curing etc. 10.00 5,245.25 C.M.

87 Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with

filling of epoxy sealent as directed by engineer in charge 10.00 50.00 Rmt.

('C) Water Supply & Sanitary Items

88 Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor

levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet squatting pan

joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand)

etc. Comp.(A) Vitreous china long pattern of approved colour For all

89 Providing and fixing Wash Down Water closet European type W.C. pan with

integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (seat and cover to be measured and paid for 35.00 1,303.71 Each

separately) (A) Viterous china pattern - I (i) in approved colour

90 Providing and fixing plastic seat and cover for wash down water closet with

C.P. brass hinges and rubber buffers (B) Plastic seat and cover. 10.00 291.33 Each

91 Providing & fixing wash basin with single hole for pillar tap at all floor levels, with

C.I. or M.S. Brackets painted white incl. cutting holes & making good the same incl.

fittings such as pillar tap, capstan head screw down high pressure with screws,

shanks & back nuts, C.P. Brass waste trap, screw down stop tap 15 mm. dia. etc. 40.00 2,059.93 No.

(A) Vitreous china flat back wash basin 550 mm.x 400 mm. size in approved colour

92 Providing & fixing Urinal or approved quality including conecting the Urinal

with waste pipe, tap etc. complete. (A) White earthenware flat back or corner type

size 430 mm x 260mm x 350mm

93 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs

with C.P.brass screws and washers etc. For all Floor

94 Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces,

R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete 1:5:10 etc. comp. Inside dimension,455 x

mm &450 mm deep for single pipe

(A) C.I. cover with frame to be not less than 38 kg. On top 15.00 2,932.93 No.

(B) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 15.00 2,681.76 No.

(C) Extra for every additional depth of 0.1 mt beyoung 0.45 mt 15.00 242.39 Each

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

95 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of

following nominal internal diameters incl. Testing of pipes and joints etc.

96 Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished bright

etc. comp.-(A) 15mm dia. For all Floors

97 Providing & Fixing gun metal check or non return full way wheel valve at

all floors levels, etc. complete.

98 Providing & Fixing chromium plated brass half turn flush cock at all floor

levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

99 Providing & Fixing abonite ball cock of approved qualities directed etc. comp. (A)

100 Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste discharge

system at all floor levels incl. All fixtures like bends, tees, shoe etc. jointed with

resin of approved brand & manufacture etc. comp. (M.R.)

101 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

102 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or

equivalent as approved by angineer-in-charge. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

103 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or

equivalent as approved by angineer-in-charge. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

104 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter

with jali of the following nominal diameter of self cleaning design with

C.I. scread down or hinged grating including the cost of cutting and making good 25.00 558.36 No.

105 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

106 Providing & fixing M.S. Holder Bat clamps at all floor levels of approved

design to C.I. Or S.C.I pipes including the cost of cutting holes & making good

the wall etc. Complete - 100 mm. dia. (M.R.)

107 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved

design to C.I. Or S.C.I pipes including the cost of cutting holes & making good

the wall etc. Complete - 100 mm. dia. (M.R.)

108 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark

water tank of required capacity each with all necessary fittings & connection 10,000.00 3.95 Lit.

etc. complete on terrace.

(D) Color Items

109 White Washing with lime on wall surface to give an even shade & surface incl.

throughly brooming the surface to remove dirt, dust mortar drops & losse

scales of lime wash & other foreign matter Two coats.

(A) walls 10.00 12.41 S.M.

(B) Ceiling 10.00 13.53 S.M.

110 Distempering two coats with oil bound washable distemper of approved

brand & manufacture & of required shade on wall surface to give an even

shade over and & including a priming coat of alkali resistance primer of

approved brand after throughly brushing the surface to give an even shade after

throughly brushing the surface free from mortar droppings and other foreign

matter and also including preparing the surface even

(A) walls 10.00 72.23 S.M.

(B) Ceiling 10.00 80.35 S.M.

111 Apply two coats of putty and two coats of primer of approved brand and

new wall surface to give an even shade including thoroughly brushing the 100.00 40.59 S.M.

surface free from mortar dropping and other matter and sand papered smooth.

112 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 100.00 79.39 S.M.

matter and sand

papered smooth.

113 Distempering two coats on previously distempering wall (without primer) with oil

bound washable distemper of approved brand & required shade on wall surface to

give an even shade after throughly brushing the surfaces clean of all grease, dirt 100.00 57.59 S.M.

loose places of sceles & also including preparing the surface even and smooth.

114 Applying Priming coat over new steel and other metal surface after over and

including preparing the surface by throughly cleaning oil, grease dirt and other

foreign matter and scoured with brushed fine steel wool, scrapers and sand paper 100.00 35.00 S.M.

with ready mixed priming

paint brushing red lead.

115 Painting two coat (excluding priming coat) on new steel and other metal

with synthetic enemal paint, burshing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matters.

116 Painting one coat (excluding priming coat) on Previously Painted steel and other

metal surface with synthetic enemal paint, burshing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matters. 100.00 38.03 S.M.

(A) For every subsequent coat Extra over item no.above 100.00 38.18 S.M.

117 Applying Priming coat over new wood & wood surface after & incl. preparing

surface by throughly cleaning oil grease dirt & other foreign matter sand 100.00 41.05 S.M.

papering & knetting Really mixed paint brushing priming for enamel.

118 Painting two coats (excluding priming coat) on New wood & wood based surface

with enamel paint to give an even shade & surface incl. cleaning of all dirt, dust &

other foreign matter.

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

119 Painting two coats (excluding priming coat) on previously painted wood &

based surface with enamel paint to give an even shade & surface incl. cleaning of

all dirt, dust & other foreign matter.

120 Polishing with french polished on New wood & wood based surface to give an

surface incl. cleaning the surface of all dirt, dust & sand papered smooth incl. a cost

of wood filler.

121 Polishing with french polished on previously polishing wood & wood based surface

to give an even surface incl. cleaning the surface of all dirt, dust & sand papered

smooth incl. a cost of wood filler.

122 Painting two coats of enamel paint over priming coat (including priming

wall after removing entire surface dirt, dust foreign matter & also incl. 100.00 90.00 S.M.

preparing the surface even & sand papered smooth etc. comp.(M.R.)

123 Painting two coats of enamel paint (Excluding priming coat) over previously

wall after removing entire surface with even shade & surface after removing

dirt, dust foreign matter etc. comp.(M.R.)

124 Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,

algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor cracks and 100.00 82.00 S.M.

defects with white cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be thoroughly scraped

off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max

(E) Aluminium Section Items

125 Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal

Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters

of horizontal member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical

member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick 25.00 2,140.33 S.M.

transparent bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details

etc complete for window. (Plain or Colour Anodized as per Instruction by Engineer-

126 Providing and fixing window having extruded aluminium Powder Coated

section frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459

@ Wt. of 0.738 Kg/mt), horizontal Three track member size 92 mm x 31.75 mm x

1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size

92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x 18 mm x 25.00 1,591.87 S.M.

1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminium fittings

& fixtures and transparent silicon sealant glass fixing to frame as per details etc.

(Plain or Colour Anodized as per Instruction by Engineer-In-Charge).

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

127 Providing and fixing window having extruded aluminium Powder Coated section

frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm x 31.75 mm x 1.20 mm (of

jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal section

no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x 1.29 mm

(of jindal section no: 8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with powder

coated aluminium fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc. complete for window. (Plain or Colour Anodized as per

Instruction by Engineer-In-Charge).

128 Providing and fixing standared extruded ofalluminium section of size

63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated

alluminium frame for ventilation with 5 mm thick frosted glass as details etc 25.00 2,414.00 S.M.

complete for Ventilation. (Plain or Colour Anodized as per Instruction by Engineer-

129 Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90

mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with Powder

Coated alluminium frame with 5 mm thick transparent bronze colour tinted 25.00 2,336.00 S.M.

float glass as details etc. complete for fix window. (Plain or Colour Anodized as

per Instruction by Engineer-In-Charge).

130 Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with

aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent approved

make having Poder Coated outer frame Leg Partition section of 63.50 mm x

38.10 mm having weight 1.158 kg. / R.M. shutter section having size 83.5 mm x

44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical

47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.),

Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet

glass in acid frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or

archid make as approved by Engineer-in charge including fixing brass pivot, handle,

lock etc. complete. (Plain or Colour Anodized as per Instruction by Engineer-In-

131 Providing & fixing Powder Coated Aluminium partly glazed and partly panelled

partition using medium duty sections of Hindalco,Zindal, Narmada, Banco

or Equivalent approved make having section 63.50 mm x 38.10mm ( Frame-.758

kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear

float glass of approved make including all other necessary fittings and fixtures.

Entire work will have to be made water proof using necessary rubber sectioned

wherever required. Gaps all round the frame to be filled with approved water proof

sealent. Bottom portion of doors both side to be covered with 12mm thick

prelaminated particle board of approved make and quality and as per design.

(Plain or Colour Anodized as per Instruction by Engineer-In-Charge).

(F) C. P. Fitting Items

132 Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat.

No.: F650003, Jaquar FLR-5011N

133 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

134 Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 , Parry ware

T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,HindWare

F280052 & CONCEALED STOP COCK

135 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper

connecting pipe 450 mm long and nuts, washer and brass flange complete, 25.00 1,432.00 No.

including cutting and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.: F440020 F850094,

jaquar CON 053 KN

Sr. S.O.R. 2023-24 ( Excl GST )

No. Rate Per Amount

136 Providing and fixing Wash Down Water closet European type W.C. pan with integral

P or S trap with normal closing seat cover L bend ncluding jointing the trap with soil

pipe in cement mortar 1:1 (1 cement : 1 find sand) 10.00 3,282.00 No.

(A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278, HindWare sleek

20011, Jaquar- CNS-WHT-751P180SPPZ

137 Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x

mm at all floor levels, with C.I. or M.S. Brackets painted white incl. cutting holes & 10.00 2,656.00 No.

making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS- WHT -6801

138 Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556

(Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,32mm dia CP bottle trap and

pipe to wall with C.P. flange complete including cutting and making good the walls

and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT 13261H

,HindWare BACK SMALL

139 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with Overhead

Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare Cat. No.:

140 Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm

thick in bath room with polished wall flange at end of bars with heavy duty anchor 10.00 890.00 No.

fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N ,HindWare

141 Providing & fixing S.S.towel rail of 600 mm long approved make including,

providing & fixing C.P. brass screws, making holes in walls & making good. 10.00 1,043.00 No.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM, HindWare

142 Providing & Fixing stainless steel recessed type Soap dish of approved make.

Including providing & fixing screws, washers, cutting & making good the walls. 10.00 793.00 No.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N, HindWare F880011

143 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels,

size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar ,HindWare

144 Providing & Fixing pressmatic bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F9020151, Parry ware G2056A1 , Jaquar PRS-043 ,HindWare F310016

145 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body) 20.00 3,465.00 No.

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ,HindWare

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.