Loading
Loading…
Loading…
Tender Value
₹6.3 L
EMD Value
₹12,548
Closing Date
29 Aug 2026, 6:00 pm5d left
AGE Nabagram
AGE (I) Nabagram
EXTENSION OF SHED OF MI ROOM FOR PATIENTS AT NMS UNDER AGE I NABAGRAM
2026_MES_783073_1
8143/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) Nabagram
As per tender document
7 documents required · 7 mandatory
₹500
AGE (I) Nabagram
₹12,548
Yes
29 Aug 2026
6 Aug 2026
31 Aug 2026
6 Aug 2026
29 Aug 2026
15 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in hard dense soil. | 7.49 | Cum | - | - |
| 2 | M&L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified. | 0.58 | Cum | - | - |
| 3 | M&L RCC M-25 (Design mix) using 20mm graded stone agg as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete | 1.6 | Cum | - | - |
| 4 | M&L RCC M-25 (Design mix) using 20mm graded stone agg as in columns, pillars, piers, posts and struts etc | 0.9 | Cum | - | - |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. | 4 | Cum | - | - |
| 6 | Removing Excavated soils exceeding 50metres but not exceeding 250 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed. | 3.49 | Cum | - | - |
| 7 | Formwork to side of concrete foundations ,footings,bases of columns raft and raft beams and similar type of work | 3.68 | Sqm | - | - |
| 8 | Formwork to sides of column and similar type of work rough finished rectangular in shape | 6.16 | Sqm | - | - |
| 9 | TMT mild steel bars10mm dia and above cut to length bend to shape required , including cranking bending spirally for hooping for coumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. | 65.31 | Kg | - | - |
| 10 | TMT mild steel bars 8 mm dia , cut to length bend to shape required , including cranking bending spirally for hooping for coumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipsas in stirrups | 34.01 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_877345.xls
BOQ • 0.34 MB
Tenderdocu8143.pdf
Tender Documents • 0.88 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].