Supply, Installation, Testing and Commissioning of Fire Safety System at District Level Sorting and Segregation Facility and Glass waste Management Unit, Kasaragod

Amount

Addressable Fire Alarm System

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying, installation, testing & commissioning addressable fire alarm sounder and strobe light with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required Make: Ravel/Agni/ASES or equivalent.

Supply, Installation, Integration and Commissioning of analog addressable Single Loop Fire Alarm Control Panel having capacity upto 4 loop cards, onboard USB Protocol, RS-485 Connectivity, touch pad, each loop shall support minimum 250 devices, connectivity via modbus, ethernet, construction 16 guage CRCA sheet with powder coated finish, IP 50 Indoor, including 1 no analogue addressable loop card complete. Make: Ravel/Agni/ASES or equivalent.

Supply, Installation of Addressable Multi Sensor Detector, Analogue Addressable Flash scan multi sensing, low-profile detector with standard base and junction box. The detector shall be with Visible color LEDs for 360 deg viewing and shall blink every time the detector is addressed, and illuminate steady red on alarm. Detectors for below false ceiling/on true ceiling complete with MS Powder coated Junction Box (if required) for mounting with Cable lugs at Ends, cable compression glands, cable tags and Ferrulings. Make: ASES/Ravel/Agni

Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/Fire Exit/ Exit/ Fire Fighting Equipment/ Fire Extinguisher/ Floor/ No Smoking / danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ in case of the fire do not use life, use stairs etc having dimension 30 cm x 15 cm dimension complete. Make: ASES/Ravel/Agni

Supply, Installation of Analogue Addressable thermal detector with standard base and suitable base box. The detector shall be with Visible LEDs for 360 deg viewing and shall blink every time the detector is addressed, and illuminate steady red on alarm.(Heat Detector) Make: ASES/Ravel/Agni

Supply, Installation of Analogue Addressable beam detector with standard base and suitable base box having In built laser light for easy alignment. Supports 5 to 50 meter range, Infrared transmitter & receiver located in a single housing. Make: ASES/Ravel/Agni

Supply, Installation of Sealed Lead Acid Battery 12 V DC x 24 Ah battery

Supply and Installation of addressable Manual Call Point break glass type red colour powder coated MS/ABS box fix on existing wall /frame,24/12 Volt DC operated push OFF/ON switching mechanism with inner, outer frame, operation label and necessary attachments.

Supply and Fixing of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4.5 kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.

Fire Hydrant System

Fire brigade Inlet connection fabricated from 100 mm dia MS Class C pipe comprising of two 63 mm dia gun metal male threaded non return valve. 4 way inlet

Supply and Fixing of Hose Box (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pie. The cabinet is made of MS/Fibre sheet with glass fronted hinged doors and lock.

Supply and Fixing of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with -ISI Marked

Supply and Fixing of Hose reel drum made of Miled Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and shutt off nozzle rang of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.

Suppy and fixing of Fire Fighting Hose , Fire Hose - 63 mm ( 2 1/2") dia , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.

Supply and Installation of Hydrant Valve- Single Headed, S.S -as per IS: 5290, ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain .

Supply and Installation of following type strainer valve for safe pump operation. 80mm dia

Supply and Installation of following type strainer valve for safe pump operation. 150mm dia

Supply and Installation of alarm control valve consisting of 1 number alarm valve, 1 number main stop valve ,1 number water meter with alarm gong, pressure guage, drain valve and drain piping etc complete 150mm dia

Supply and Installation of Pendent type Sprinkler 15 mm , 1/2" BSPT end connection having temperature 68 degree C made out of forged brass and SS decorative finish with temperature sensing tube, pressure with standing minimum 8 kg/cm2 , UL listed.

Supply and Fixing of Air cushion vessel made of MS sheet 200 mm dia in 1 mtr height, with automatic air release cock, 25 mm drain valve and shut off with all necessary attachments.

Supply and fixing of Air release valve gun metal body of 25 mm dia

Supply and fixing of pressure guage, 4 " dial, 0 - 200 psi range 3/8" BSP weather proof with stainless steel internals, siphon tube including fittings etc.

Supply and fixing of pressure switch having 1/4" BSP (F) connection IP:32 enclosure protection, pressure range 0 to 200 psi with necessary contact

Supply and fixing of Ball Valve cast iron body as per IS 5312 with ISI mark.

Supply and fixing of Non Return Valve single plate wafer type swinch check valve, short pattern type with integral hinge pin disc, nitrile rubber O - ring seat and face sealing as per IS: 5312 with ISI mark. 150mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 50 mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 80 mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 100 mm

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 25mm dia

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 32mm dia

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 40mm dia

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 50mm dia

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 65mm dia

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 80mm dia

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint. 100mm dia

Supply, erection, testing and commissioning of 5Watt PA cum Talk Back speaker wall mounted type

Supply & Erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.

Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/ Fire Exit/ Exit/ Fire Fighting Equipment/ Fire Extinguisher/ Floor/ No Smoking / danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ in case of the fire do not use life, use stairs etc having dimension 30 cm x 15 cm dimension complete

Approvals

Preparation of all initial and final drawings, submit to Panchayath, Municipality, KSEB, Electrical Inspectorate, Kerala Water Authority, State Pollution Control board, Fire Department, Factories and Boilers and other agencies if any for getting approval, sanction and obtaining No Objection Certificate (NOC) from Fire Safety Department. (All statutory payments shall be borne by Client upon submission of original reciept/challan)

Cable Tray

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 225 mm width X 50 mm depth X 1.6 mm thickness

UPS and accessories

Supply, Installation, Testing and Commissioning of Single phase, 5 kVA Online UPS along with Maintenance free SMF batteries and battery rack complete with 2 hr backup. UPS must have inbuilt Short Circuit, Over-Current Over-Voltage protection. Minimum 2 year warranty. Make: APC/V-Guard/Luminous or equivalent

Terrace Pump

Supply, Installation, Testing and commissioning of Electrically driven Terrace pump raced 900 LPM at 35 M head high efficiency volute type with cast iron casting, impeller, pump coupled to a squirrel cage induction motor, totally enclosed fan cooled with supply condition 415V, 3 phases, 50Hz, foot mounted type rated for 10 HP at 2900 RPM . including mounting accessories, bolts, necessary foundation complete as required by the Site Engineer in charge. Make: Grundfos/WEG/Crompton/Kirloskar/Lubi or equivalent

Pump Control Panel

Supply, installation, testing and commissioning of Motor Control Panel for Fire pumps incorporating starters and Switchgear suitable for the motor HP. Incomer - 63A TPN MCCB - 1 No, Outgoing - a) 32A TPN MCCB - 3 Nos. The control panel shall be duly painted with 2 coats of anti-corrosive primer and Epoxy paint of Fire Red Color fabricated out 16SWG CRCA Sheet floor mounted type with all accessories as required etc. complete with Control and Power terminals, etc.with the following complete with all accessories as per Kerala State Electrical Inspectorate Standards.

Pump Control Panel

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 35 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 16 sq mm

od49848/2023_2024 : Supply,Installation of LED batten suitable for twintubelight of 16W/20W IP65 protection including all required mounting accessories,frames complete.(Make -Crompton,Wipro,Philips or equivalent)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. Vertical type 6 way TPN DB

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Conducting required resistivity tests, earth fault calculation preparation, testing using megger and issue of test certificates for earth pits

USHA FIRE TECH

Allies Fire Systems Pvt Ltd