SPECIAL REPAIR TO OFFICERS MESS SINGLE LIVING ACCN AT 3BRD AF STATION CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

M&L for 15mm thick in cement mortar 1:3 mixed with WPC as in chajjas upto 12 Mtr height including necessary scaffolding and taking down old cement plaster and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed. Note :- WPC shall be measured and paid separately

M&L for rendering 10mm thick in cement mortar 1:3 as on ceiling of surfaces finished even and smooth without using extra cement including taking down old cement plaster and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed.

M&L for providing cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps,Chajjas, seismic and other similar bands, plinth courses, string courses, lacing course, parapets and railing upto 60cm height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and threading including demolition of cement concrete and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on walls of other than fair face even and smooth without using extra cement including taking down old cement plaster and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on walls of surfaces using WPC finished even and smooth without using extra cement upto 12 Mtr height including taking down old cement plaster and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed. Note :- WPC shall be measured and paid separately

Supply only liquid integral water proofing compound complete all as directed.

M&L for preparation of new plastered /concrete surfaces of ceiling and applying two coats of oil bound distemper, white or tinted etc complete all as specified and directed.

M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of oil bound distemper, white or tinted etc complete all as specified and directed.

M&L for preparation of new plastered/concrete surface of wall and applying two coats of exterior emulsion paint over one coat of primer upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of oil bound distemper over one coat of primer, over a thin layer of wall care putty white or tinted upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of old steel or iron surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint upto 12 Mtr height , including provision of scafloding complete all as specified and directed.

M & L for complete removal of exiting treatment of wall, rubbing with sand paper etc and provide two coats of oil bound distamper on wall over prepared surface finished with and and over a coat of primer including a thin layer of birla white putty complete all as specified and directed.

M&L for complete removal of existing treatment from external surface of wall by wire brushed & stopping of surfaces and leveling/edging the disturbed places/edges using birla white putty to obtain smooth regular/even finish using sand paper and applying two coats of exterior emulsion paint over and including one coat of primer and upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed.

M&L for First Quality, Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick, in vertical surface such in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete including rendering 10 mm thick in cement mortar 1:4 on brick walls for laying tiles complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 6 for laying floor finishes complete all as specified and directed .

M&L for virified ceramics tiles light shade 10 mm thicks (square/ rectangular) polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and incuding 15 mm thick screed bed or bedding layer in CM 1: 6 ,complete all as specified and directed .

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed .

M&L for 12mm thick glass reinforced gypsum (GRG) ceiling tiles of size 595 x 595mm of approved design fixed with powder coated (powder coating on web bottom only) GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm) and powder coated GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x 595mm with 4mm dia GI wire suspender including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrangement with grid size 60x120cm complete all as specified and directed. Make : Diamond Brand TM/ Dexune/Everest.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed

Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed

M&L for powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for fixed frame portion and shutters frame(any track)/openable windows frame, ventilators frame, partitions with extruded built up standard tubular sections/appropriate Z sections and other sections conforming to IS : 733 and IS : 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/Neoprene gasket roller etc aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing/gauged/paneling, CP brass/stainless steel screws, complete all as specified and directed.

M&L for Aluminium power coated grill (DECO grill) weight not less than 1.8kg/Sqm fixed to aluminium door /window/ventilator frame including all fixing arrangements including aluminium channels, screws, U or F section etc complete all as specified and directed.

S&F float glass tinted 5mm thick fixed in aluminium frame with aluminium powder coated snap beading including rubber/EPDM gasket, complete all as directed.

M&L for aluminium composite panel sheet of colour and shade as approved by GE of 4mm thickness which consists of 3mm thick termoplastic core of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30 PVDF & inner sur;face finished with a thin coat of polyster paint, cladding panel fixed to aluminium grid of size n.exc 2 sqm and size of section shall be 38mm x 50mm x 1.5mm thick, aluminium grid fixed to wall by FI clamp 25 x 6mm lwith spacing not more than 1m c/c, solour shade and pattern as approved by GE including all necessary frame work & complete all as directed . Make : Euroboard/Armstrong/Alstom Internaltional Private Limited.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face with particle board core , fixed in frame complete all as per specification and as directed.

S&F mild steel Mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified and directed.

S&F Door closer aluminium (Die cast) body, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F 180 mm size Powder coated(any tint) aluminium "American Handle" fixed to aluminium door with suitable screws complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and directed.

S&F anodised Aluminium sliding door bolts 200mm,plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 200mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed.

S&F Powder coated Door Seal fixed with screws to any type of shutter complete all as specified and directed.

Supply and fixing, aluminium handle 150mm long, complete all as specified and directed.

Supply and fixing, 125mm aluminium anodised type hasp and staple safety type, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Taking down for repairing any type of aluminum/wooden door shutter and refixing in same opening after resecuring its framework by means of tightening with new screws or by aluminium angle cleat complete all as specified and directed.

Taking down for repairing any type of aluminum Window shutter and refixing in same opening after resecuring its framework by means of tightening with new screws or by aluminium angle cleat and including new roller (moving for window), side clips etc complete all as specified and directed.

S & F in repair of Vitreous china one piece EWC standard size white/ivory colour with dual flushing cistern white including 'P' or 'S' trap and fixed complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal to store complete all as specified and as directed.

S & F 15mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting chasing into wall etc all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal to store complete all as specified and as directed.

S & F for 20mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chasing into wall etc all as specified and as directed.

S&F in repair Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I complete all as directed.

S&F in repair grating doom 125 mm dia with waste hole of PTMT (Min wt 40g) complete all as specified and directed

S&F in repair flexible health faucet with clamp suitable for 15mm bore pipe complete all as specified and directed

S&F in repair CP Central hole Basin Mixer with copper pipe suitable for 15 mm bore pipe complete all as specified and directed

S&F in repair Wall Mixer telephonic type chromimum plated with CP wall flange suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair Over head shower Single flow self cleaning type with arm suitable for 15mm bore pipe complete all as specified and directed.

S & F in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.

S&F in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges and fixed complete all as specified and directed

S&F for CP Toilet paper holder including all fitting and fixture complete all as specified and directed

S& F in repairs for Stop valves, chromium plated screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore complete all as specified and directed

S&F in repairs for Chromium plated brass angle valve concealed type for 15mm bore pipe and fixed complete all as specified and directed.

S&f in repair vitreous China under counter wash basin, white or ivory colour flat back, size 470mmx350mm excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand of fixing of supply and waste pipe etc fixed complete all as specified and directed.

S&F in repair Chromium plated brass concealed stop valve for 15mm bore pipe, fixed complete all as specified and directed.

S&F 50mm bore high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm , in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed.

M & L for Machine cut kota stone slab in riser of steps, skirting, dado 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 10mm mm thick rendering in cement mortar 1:4 including dismantling and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed.

S & F for 1.25mm thick mild steel( perforated type) plain black sheet in wall cladding, steel gate and similar work, cut to size holes punched including rounded headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending and turning up, mitred angles etc as required complete all as specified and directed.

M&L for preparation to new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

S & F stainless steel curtain rod 20mm dia bore with brackets, stops, roller ,latu etc complete all as specified and directed.

S&F PVC Floor trap 75 mm complete all as specified and directed.

Dismantling of post or struts ( wood ,steel, RCC) any section including taking out embedded portion and making good disturbed surface complete all as specified and directed.

Excavation in post holes in soft/loose soil (or similar holes) each n. exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm , watering , and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and directed.

M&L for Plain cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate in foundation filling and mass concrete, complete all as specified and directed.

Supply and fix roof trusses ( framed ) trussed ,purlins, crane gantris, rail and fastening ( beam, tee, angle, channel of flat sections ) including distance pieces cleats etc Fe-290(GdeE-165) complete all as specified and directed

S&F Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick, corrugated sheet having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed.

S&F anodised Aluminium sliding door bolts 300mm,plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F Pre-laminated particle board 25mm thick, interior grade, pre laminated one side decorative choice lamination and other side balancing white,fixed in frame,partion,work etc complete all as specified and as directed.

M&L for clean sawn second class hard wood in frame work complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps when open 30mm fixed complete all as specified and directed.

M&L for teak wood Lipping 6mm thick fixed to 25 mm board with polishing colour and fixed with nails etc complete all as specified and directed.

M & L for Grinding & polishing of old kota stone/ marble/ baroda green floor/skirting with machine to mirror finish in and including making good of wall finishes as per original specifications complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris outside the defence land exc 1.5Km but n.exc 3Km all as specified and directed.

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris outside the defence land exc 1.5Km but n.exc 3Km complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 80mm thickness M-40 grade, laid over and including sand cushion of 40mm thick, complete all as specified and directed.

M&L for providing Precast cement concrete block Type B-1, 1:2:4 (20mm graded aggregate) factory made as in Bed blocks,kerb stone etc with plain fair faces including chamfers, weatherings, throating etc.and setting in cement mortar 1:4 including dismantling of existing kerb stones and removing the debris outside the defence land complete all as specified and as directed.

M&L for preparation of new untreated concrete/ plastered surfaces of kerb stone and applying two coats of synthetic enamel paint, white or coloured/tinted over one coat of primer etc complete all as specified and directed.

S&F for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for reinforcement cement concrete (nomial mix) Type B0 1:2:4 (12.5mm graded aggregate) for self and other similar work etc all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings self and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and directed.

S&F in repair bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed.

S&F in repair 100mm cast iron bends complete all as specified and directed.

S&F in repair 100 mm cast iron soil waste and vent pipe sand cast pipe in any length with or without ears jointed with cement mortar (1:3) laid in trenches or in floors complete all as specified and directed.

S&F in repair 75 mm cast iron soil waste and vent pipe sand cast pipe in any length with or without ears jointed with cement mortar (1:3) laid in trenches or in floors complete all as specified and directed.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm complete all as specified and directed.

M&L for granite 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and laid over 15mm thick Screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of same complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for filling broken bricks bats of size 40mm to 63mm as in sunken portion including grouting in cement mortar 1:6 complete all as specified and directed.

M&L for providing water proofing treatment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approval in Technical Instruction 5/2003 by adding: (a) 15mm thick plaster (1:4) cement sand mortar with and including integral water proofing compound 2% by weight of cement on floor and wall , finishing the surface even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (b) First layer of slurry of cement @.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ .253 kg/sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @.242 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ .126 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs. complete all as specified and directed. (d) 200 micron thick polythene film pasted with the help of adhesive shall be provided over above treatment. (Note: Water proofing compound shall be measured and paid separately).

M & L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregates as in flooring laid in slope and finished rough complete all as specified and directed.

M & L for 40 mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in flooring and finished even and smooth without using extra cement complete all as specified and directed.

Supply and fixing in repair cast iron floor trap with grating including jointing to waste pipe with cement joint, dia of outlet 75mm fixed complete all as specified and directed.

Supply and fixing pre laminated particle board (water proof) for kitchen cup board of approximate area 9.0 Sqm for one kitchen cup board as per the following specification complete all as directed.:- (a) The frame work of kitchen cabinets including drawers fascia/sides/bottoms, back side shelves made out of 18/19mm thick pre-laminated particle board (plain/white), each shutter should be fixed to the frame work using two numbers of soft close auto cut hinges of make Hettich/Kaff/Hafele . Old stainless steel drawer tray -06 Nos should be cleaned and refixing in same opening with new particle board including fixing arrangement screw/nut bolt etc. (b) Each drawer shall be mounted on approved quality high precision soft closed telescopic channel -02 Nos per drawer of make Hettich/Kaff/Hafele of 45Kg capacity to be designed as per drawer size and meet to the weight requirement with minimum length of 20 to 25 inches to ensure smooth movement of drawer with/without content weight and including all handles, beading and necessary items as required at site. Note:-One kitchen cup board required following accessories:- (i) Self close auto cut hinges 10 Nos approx (ii) Soft close telescopic channel 08 Nos approx (iii) Handle stainless steel 150mm long 09 Nos approx (iv) Stainless steel cleaning and making useable -08 Nos approx (v) Beading all around drawers and all frames

S&F water heater storage type, 5 star rating (Geyser) of capacity 25 litres rated power 2KW including grouting the nuts, bolts, washers and all other accessories as required at site for the effective functioning of the water heater complete all as directed.

S&F flexible PVC connection, nylon thread reinforced 15mm dia, 450mm long brass nut at both ends for 15mm dia pipe for hot water, complete all specified as directed.

Taking down existing copper/aluminium conductor point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, bell/buzzers, regulators, sockets etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, ceiling, etc, complete all as specified and directed.

Material and labour, point wiring (Concealed) with single core multi stranded copper conductor 1.5Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including non metallic rigid PVC conduit medium duty of size 19/20mm with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including powder coated M.S. box of required module for modular switches/fan regulators etc, including 1.5Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one light/ fan/bell point or fan point controlled by one modular switch, complete all as specified and directed. Note : 1. Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required. 2. Modular switches, sockets etc shall be measured and paid separately.

All as per Serial Item No. 105.00 above but for one socket outlet 3pin, 6Amp, on the same board.

All as per Serial Item No. 105.00 above but for one socket outlet 3pin, 6Amp, on independent board.

All as per Serial Item No. 105.00 above but one light point controlled by two way switch.

Material and labour, point wiring (Concealed) with single core multi stranded copper conductor 2.5Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including non metalic rigid PVC conduit medium duty of suitable size with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including powder coated M.S. box of required module for modular switches/sockets etc, including 1.5Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one power point 6 pin combined module multipurpose 6 & 16Amps modular socket outlet, controlled by one modular switch, complete all as specified and directed. Note : 1. Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required. 2. Modular switches and sockets shall be measured and paid separately.

Supply and fix, modular switch, one way, 6Amps, one module, complete all as specified and directed.

S&F modular switch, 1 module single pole one way 16 Amp complete all as specified & directed.

Supply and fix, modular switch, two way, 6Amps, one module, complete all as specified and directed.

Supply and fix, modular bell push 6Amp, One way, one module, complete all as specified and directed.

S&F Socket outlet 3 pin 6 amp multipurpose, modular type, 2module complete all as specified & directed.

S&F Socket outlet 3 pin 6/16Amp multipurpose, modular type, 2 module 240 volt complete all as specified & directed.

Supply and fix sheet metal enclosure , single pole and neutal including two pin, earth plug and socket, with one MCB single pole, 20 Amp, 240volt, including necessary electric connections complete all as specified and directed.

Supply and fix ceiling rose, surface bakelite, 65mm x 50mm, three terminals complete all as directed.

Supply and fix fan regulator, modular type, 5 step high speed (2 Module), 100 / 120 W, 230 V fix with new screws and making electric connection complete all as specified and directed.

Supply and fix call bell, 6Amps, 230V complete all as directed.

Supply and fixing in repair 04 feet 20W LED batten with extruded aluminium housing with high quality PC diffuser, colour temp 6500K, PF>0.9 complete all as specified and directed .

Supply and fixing in repair 02 feet 10W LED batten with extruded aluminium housing with high quality PC diffuser, colour temp 6500K, PF>0.9 complete all as specified and directed .

Supply and fixing in repair LED bulk head light along with fixture of capacity 10W complete all as specified and directed .

Supply and fixing in repair indoor decorative aluminium extruded 5W T5 LED surface mirror fixture having system efficiency >80, Power factor >0.9, THD 10%, surge protection 2.5KV with diffuser and decorative end caps (6500K) complete all as specified and directed .

Supply and fixing in repair wall mounted fittings with ABS housing and clear polycarbonate cover suitable for retrofit LED bulb (including LED bulb) and provision of flexible copper cable of size 0.50Sqmm, 3 core from ceiling rose/connector to fittings complete all as specified and directed .

Supply and fixing in repair sheet metal enclosure SPN double door (DBs) for mounting MCB of 240V, 8way with 200A rated bus bar single pole and neutral and fixing in position including copper lugs for cable connection and plates as required, complete all as specified and directed .

Supply and fix in repair MCB SP 6-32Amps, 240volts, 10KA, 'C' curve, complete all as specified and directed.

Supply and fix in repair DP isolator 240V, 32Amps, complete all as specified and directed.

Material and labour for Sub Main Wiring with Two run single core 6Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including rigid nin metalic PVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including One run of continuous multi stranded copper conductor 6Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface including taking down old wiring, complete all as specified and directed. Note:- Two run of 6Sqmm + One run of 6Sqmm for earth wire shall be measured as one RM.

Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.5 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, including GI wire 4 mm dia as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 15 mm dia light grade GI protection pipe and watering pipe 20 mm dia medium grade with funnel and wire mess including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc including dismantling old earthing , complete all as directed and specified.

Supply and fixing earth continuity conductor or main earthing lead 4.00mm dia galvanised iron fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as directed and specified.

Note:- Amount of credit of Rs.42590.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

MS SACHDEVA BUILDERS

M/s Nuway Constructors India Pvt. Ltd.

KUMAR AND COMPANY

KRISHAN KUMAR CONTRACTOR

Anil Kumar Gupta

Tejpal Singh and Co.