Procurement of Spares for Excentric Crusher of Unit 6 under AHP (MM) Dept.,STPS

GLAND PACKING 1 SET=2 NOS FOR BOTTOM ASH CRUSHER DCIPS "DRG.NO.28P03-1B-T-582(REV-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT;MOC-CI FG260;IS-210;1 set = 2 nos Gland Packing

Lantern Ring (1 Set=2 Nos.) for Bottom Ash Crusher as per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT;MOC-Brass LTB2;IS 318

Packing ring for Bottom Ash Crusher Additional Data: FOR DCIPS DESIGN 250 MW UNIT;

Packing Gland Follower (1 Set=2 Nos.) for Bottom Ash Crusher as per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT;MOC-Brass LTB2;IS 318

Packing Gland Flange for Bottom Ash Crusher as per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT;MOC-MS IS2062;Gr -A

Slinger for Bottom Ash Crusher Drawing No.28P03-1B-T-582(Rev-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT;MOC-MS IS2062;Gr -A

SPROCKET DRIVE AND DRIVEN FOR BOTTOM ASH CRUSHER DCIPS DRG.NO.28P03-1B-T-582(REV-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT;Drive Sprocket - Cast Iron FG 260/ steel casting , Gear Tip hardened . Driven Sprocket - cast iron / steel casting Tip hardened to 460 BHN. The Sprockets should match with the existing Chain at Site.

FEED SUMP FOR CLINKER GRINDER FOR BOTTOM ASH CRUSHER DCIPS DRG.NO.28P03-1B-T-582(REV-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT

CHAIN (SIMPLEX) FOR DRIVE ARRANGEMENT FOR BOTTOM ASH CRUSHER DCIPS DRG.NO.28P03-1B-T-582(REV-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT;Chain will have 1 1/2 IN Pitch ,ANSI # 140 , Estimated Length 6400mm.The Chain to Be supplied with one Connector & one Link. The Chain should fit the existing Sprockets at site

ADJUSTABLE SEATING WEDGE # FOR BOTTOM ASH FEED GATE ASSEMBLY AS PER DRAWING NO.28P03-1B-T-576(REV-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT

LABYRINTH RING FOR BOTTOM ASH CRUSHER DCIPS AS PER DRAWING NO.28P03-1B-T-582(REV-2) Additional Data: FOR DCIPS DESIGN 250 MW UNIT

BEARING HOUSING NDE FOR BOTTOM ASH CRUSHER DCIPS AS PER DRAWING NO.28P03-1B-T-582(REV-2);WITHOUT (BEARING ,LABYRINTH RING - 2 NOS. ; OIL SEAL - 2 NOS. ; FASTNERS - 1 LOT BEARING Additional Data: FOR DCIPS DESIGN 250 MW UNIT

BEARING HOUSING DE FOR BOTTOM ASH CRUSHER DCIPS AS PER DRAWING NO.28P03-1B-T-582(REV-2);WITHOUT (BEARING ,LABYRINTH RING - 2 NOS. ; OIL SEAL - 2 NOS. ; FASTNERS - 1 LOT BEARING Additional Data: FOR DCIPS DESIGN 250 MW UNIT

A T ENGINEERING CONCERN

B.A.ENGINEERING WORKS

M03-B04-00160 HSN: 8431

Ramkrishna Precision Engineering

M03-C18-00007 HSN: 8431

M03-C18-00017 HSN: 8431

M03-C18-00066 HSN: 84819090

M03-C18-00065 HSN: 84819090

M03-C18-00062 HSN: 84819090

B.A.ENGINEERING WORKS

M03-C18-00028 HSN: 84819090

M03-C18-00026 HSN: 8431

M03-C18-00029 HSN: 84819090

M03-C18-00014 HSN: 8431