Repair to roof flooring joinery sanitary fittings plastering sunken floor and other comprehensive maint work for MES Staff Qtrs area under AGE BR II at GE (N) Amednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge.

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge.

M & L in repair for precast PCC solid block masonry type C1 of (1:3:6) using 20 mm graded stone aggregate exc 10 cm in width built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge.

M & L in repair for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Anti skid ceramic coloured tiles to match dado tiles makes as specified in PS,7-8 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for joint free / rectified ceramic coloured tiles SSR series of Johnson/ FT series of orient bell or equivalent make in list of makes mentioned in appendix `C', 7-8 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 6 (here-in-before) but in skirting over 10 mm thick rendering in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.12 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing and pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge.

Material and labour machine cut cudappah stone slab 20-25 mm thick over cement screed base, full round moulding the edge laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 60mm thick, PCC pavers interlocking tiles 25x25x25mm thick of glossy finish, any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl levelling & sweeping etc complete all as specified and directed by Engineer-in-Charge

M & L for chequerred cement concrete tiles with pigment 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry as in floors, laid over and including screed bed of 15mm thickness in Cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick, plain cement concrete (1:4:8) type D2, using 40 mm graded mechanically crushed stone aggregates as in sub base etc complete all as specified and directed by Engineer-in-Charge.

M & L for Cement concrete type D-2, (1:4:8) (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge.

M & L for PCC type B0, (1:2:4) (using 12.5 mm graded stone aggregate) as in copings including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames not exc 1.50sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames exc 1.50sqm not exc 4.00sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 20 (here-in-before) but pressed steel frame of size125 mm x 60 mm complate all as specified

Supply and fix PVC door frame made out of PVC section 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing PVC Door Shutter frame & infill panel made from PVC material conforming to IS 10151;1982. The shutter frane shall be made out PVC extruded section having overall dimensions of 100mm x 30mm with two self extruded grooves at 40 mm & 50 mm on front surfaces.The infill panel shall be made out of multi chambered seamless hollow PVC extruded panel having 20mm thickness. The shutter frame shall be mitre cut & jointed at corners by means of polymeric corners. all the hardware locations shall be reinforced with special polymeric bars.

Supply and fix windows double shutters including box/projecting type hinges with steel handle, and steel peg stay, complete with guard bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge. Note: Rate quoted is deemed to be included for scaffholding etc reqd upto 7.50 m height

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay all as directed.NOTES: 1) Guard bars shall be measured and paid separately as supply only. 2) M & L for galzing shall be measured and paid separately. 3) Rate quoted is deemed to be included for scaffholding etc reqd upto 7.50 m height etc complete all as specified and directed by Engineer-in-Charge.

S&F mild steel square guard bars 10 mm welded to steel windows / ventilators etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 35 mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 35 mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for filling in door frames in plain cement concrete, (1:2:4) type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type type C-21 complete all as specified. weight cold rolled of size 75 mm complete etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 200 mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised barrel tower bolt of extruded section 200 mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised barrel tower bolt of extruded section 150 mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised handles of extruded section 150 mm long etc complete all as specified and directed by Engineer-in-Charge.

S & F Mild steel 300 mm ordinary rat tail rod pattern springs, including roller plate etc complete all as specified and directed by Engineer-in-Charge

All as per item No 38 (here-in-before) but fixed in repairs etc complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M & L for rendering, 10 mm thick on stone/brick /PCC block or concrete surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 of Hindware or equivalent make in list of makes mentioned in appendix `C'

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge. Make : Cat Part No 10004 of Hindware or Cat Part No C0475 of Parryware or equivalent make in list of makes mentioned in appendix `C'

Supply and fix in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320 (Orintal series) of MARC or equivalent ior equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1010 (Orintal series) of MARC or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs, shower rose with shower arm of Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) of MARC or equivalentor equivalent makes mentioned in list of makes in Appendix `C' etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C 8610 of Parryware or euivalent or equivalent makes mentioned in list of makes in Appendix `C'

M&L for Filleting in any position and any shape in cement and sand mortar (1:4) including mitered stop etc sectional area of fillets not exc 10 sqcm as in for dado/ skirting top etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild Steel 20 mm dia CP curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repairs 32 mm dia PVC waste pipe (outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 53 (here-in-before) but 1000 ltrs.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness size, quality or description) from wooden/Steel frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 0.5 Sqm in each pane incl supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in suqare n.exc 0.5 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 57 (here-in-before) but figured glass pin head type etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for figured glass, pin headed 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge.

Preparing new surfaces and applying two coats of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge.

Preparing new surfaces and applying two coats of white wash on ceiling including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge.

Preparing new surfaces and applying two coats of cement based paint on walls etc complete all as specified and directed by Engineer-in-Charge.

Preparing new wooden surfaces and applying two coats of syntheic enamel paint over a coat of pink primer etc complete all as specified and directed by Engineer-in-Charge.

Preparing new steelsurfaces and applying two coats of syntheic enamel paint over a coat of red oxide primer etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and etc complete all as specified and directed by Engineer-in-Charge

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge Make :- Sleek essence series Of Hindware or Cat part No E8303 Of Parryware or equivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm etc complete all as specified and directed by Engineer-in-Charge

M & L for Taking up or down steel tubing 15 mm bore of pipes and connections, etc complete all as specified and directed by Engineer-in-Charge.

M & L for Taking up or down steel tubing 20 mm bore of pipes and connections, etc complete all as specified and directed by Engineer-in-Charge

M & L for 16 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge.

M & L for 20 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs PVC (SWR) pipe 110/100mm bore single socketed in any length with rubber ring fixed to wall/laid in trenches or in floors with approved solvent/adhesive including neceassry stack clamps etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No 73 (here-in-before) but 75 mm bore

Supply and fixing PVC (SWR) bends any radius, for 110/100 mm bore of pipe fixed with approved solvent/adhesive fixed to walls or in floors etc complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 75 (here-inn-before) but 75 mm bore

Supply and fixing PVC (SWR) 110mm bore 'T' equal or unequal etc complete all as specified and directed by Engineer-in-Charge.

S & F in repair 100 mm dia CP grating etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S & F in repair rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 (Gde-E- 250) quality-A etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other coverings, doors etc to be prepared for handing or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and directed by Engineer-in-Charge.

An amount of Rs 70,945.00.00 shall be deducted from BOQ on account of schedule of credit

Ms. M.D. Auty

M/s. N D Karande

Arihant Construction

M/S. M. F. Sharif & Co.