PETTY REPAIR AND DAY TO DAY MAINTENANCE AND MISC BR WORK AT ICGAE AND DHARAMPUR AT PORBANDAR UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A' B/R

Demolition of stone /boulder, Precast concrete block, masonary work built in Cement Mortar including all quoins, arches, pillars etc & removing from site, complete all as specified and directed by Engineer-in-charge.

Material and labour for Porbandar stone masonry, well bonded, bedded and solidly hearted built in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge.

Material and labour for Porbandar stone masonry, well bonded, bedded and solidly hearted not exceeding 10 cm in width and setting in Cement Mortar 1:4, complete all as specified and directed by Engineer-in-charge.

Demolition of reinforced cement concrete of any description and in any position and disposal of debris up a distance not exceeding 100 Metre where directed, complete all as specified and directed by Engineer-in-charge.

Material and labour for RCC Nominal mix, type B-1 (using 20mm graded aggregate) as in chajja, lintels over 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating any height including necessary scaffolding, ladder & formork etc., complete all as specified and directed by Engineer-in-charge.

Material and labour for precast cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) in landings, cover slabs and similar articles with plain faces set in cement mortar 1:4, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing CRS TMT bars 6mm dia to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-charge.

Dismantling steel work including doors, gates but excluding framed truss etc., complete all as specified and directed by Engineer-in-charge.

Material and labour for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc of grade Fe-410-W (Gde E-250) quality-A, complete all as specified and directed by Engineer-in-charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw, complete all as specified and directed by Engineer-in-charge.

Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc., including removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm, complete all as specified and directed by Engineer-in-charge.

Material and labour for rendering 15mm thick, cement plaster, in cement mortar (1:4) mixed with integral water proofing compound as per manufactures instruction, on roof slab surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. Note:- Water proofing compound shall be measured and paid separately)

Material and labour for providing APP based membrane course roof treatment in layers with following provisions:- (i) Applying one coat of bitumen's primer polymerized primer oil based coat, evenly @ 0.3 Kg/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely. (ii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method. (iii) Applying a coat of solar reflective bituminous aluminium paint @ 0.10Kg/Sqm over mineral surface.

Supply only water proofing compound (integral), complete all as specified and directed by Engineer-in-charge.

Dismantling of stone slabs and tiles of any description in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed by Engineer-in-charge.

Material and labour for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick with Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

Material and labour for Non-skid coloured ceremic tiles 7 to 8mm thick area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer 15mm thick with Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge.

Material and labour for coloured glazed ceremic coloured tiles of size 450 x 300 x7mm thick in vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat in 10mm thick with Cement Mortar 1:4, complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm, complete all as specified and directed by Engineer-in-charge.

Taking down Chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2.0 Sqm each, complete all as specified and directed by Engineer-in-charge.

Material and labour for powder coated Aluminium Anodised frame (minimum thickness of powder coating 50 micron) for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed by Engineer-in-charge.

Material and labour for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 30mm thick 2nd class Hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-charge.

Material and labour 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, covered with decorative face veneer with lipping/frame on both sides, complete all as specified and directed by Engineer-in-charge.

Material and labour for 18mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thk decorative choice laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction, fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc., complete all as specified and directed by Engineer-in-charge.

Material and labour for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 200mm long Aluminium, anodised, barrel tower bolt of extruded section and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 100mm long Stainless steel Butt hinges, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 150mm long Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair aluminium anodised barrel tower bolt of extruded section and fixed 200mm long, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair aluminum handles fabricated type anodised 150mm, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair floor door stoper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 150mm length, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair CP grating 125mm dia with / without hole round fix on floor / nahani trap fixed with cement morter, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair stainless steel sink without drainage board made of stainless steel of 1mm thick for kitchen with plugs, washer and wates including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm and bowl size 410mm x 330mm x 160 mm, complete all as specified and directed by Engineer-in-charge.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc., for 250 to 500 ltrs capacity of tanks, complete all as specified and directed by Engineer-in-charge.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc., for exceeding 500 ltrs and not exceeding 1000 ltrs, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapple with screws to steel windows by drilling holes if not existing and wooden beads to wooden joinery, Cost of beads of flat iron and wooden beads included in the rate, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repairs aluminium extruded section door closer hydrolically operated regulated designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing 12mm thick Toughned Glass Door with patch fittings of SS-316 Grade including Decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, Stainless steel 2 Nos H Type Handles of 450mm suitable size as directed, Fin Connect Patch Lock etc., in each door, including cutting holes in any size in floor and wall, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing decorative type vertical blind of any colour and size width 1.50 mtr and height 1.20 mtr suitable for window, complete all as specified and directed by Engineer-in-charge.

Supplying and laying in repair of CPVC pipes of size 25mm outer dia SDR-11 & Plain CPVC SDR 11 fittings fixed inculding taking up or down steel tubing/cpvc pipe and connections complete to walls, ceilings or in floors, complete all as specified and directed by Engineer-in-charge.

Supplying and laying in repair of CPVC pipes of size 16mm outer dia SDR-11 & Plain CPVC SDR 11 fittings fixed taking up or down steel tubing/cpvc pipe complete to walls, ceilings or in floors, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair Central Hole Basin Mixer with Popup waste system, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair Wall Mixer 3 in 1 with provision for overhead shower and hand shower with 115mm long bend pipe on upper side, connecting legs & wall flanges, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair 15 mm bore pillar taps fancy type ,cast copper alloy ,with capstain head, chromium plated, screwed down, high pressure, with or without letters cold or hot with long shank and fly nuts screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 15mm bore Bib taps, with fancy type flange chromium plated cast copper with crutch alloy with capstan head with screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair brass chromium plated shower roses 125 mm size with swivel joints, any size including fixing to steel pipe or union and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 15mm Angle Cock/stop value, fancy type, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Vitreous china wash basin, white, flat back, size 550mm x 400mm including waste pipe, brackets including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair Soap dish vitreous China white, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Vitreous china urinal, full stall type, white( excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including fixing bolts and flush pipe, plastic seat cover, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair EWC one piece with integrated cistern with soft closing seat cover and twin flush fittings size 640 x 360 x 765, white in colour, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair vitreous china squatting pan, Orissa pattern size 580mm x 440mm white, with integral foot rests, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, lowlevel, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 32mm dia and 900mm long PVC waste pipe suitable for sink, WHB and urinal, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair PVC connections 15mm dia size with PTMT nuts of length 600mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair waste coupling of 32mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair waste coupling of 40mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints laid in trenches or floors, complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC(SWR) bends any radius 75mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 75mm dia PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repairs Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs, including dismantling of existing tank and removing to store, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs, including dismantling of existing tank and removing to store, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing Stainless steel pipe of grade 304, of any dia for railling / balusters over existing parapet including base, collars, caps, head caps and anyother specials etc including necessary welding, polishing and drilling in masonary and filling with epoxy grout etc., including taking out old SS railing and removing to store, complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster includiing raking out joints hacking for key and scrubbing down with water, complete all as specified and directed by Engineer-in-charge.

Material and labour for rendering 10mm thick on fair face of brick work or concrete surfaces in Cement Mortar 1:6, finished even and smooth wiithout using extra cement, complete all as specified and directed by Engineer-in-charge.

Material and labour for rendering 15mm thick, cement plaster, in cement mortar (1:4) mixed with integral water proofing compound as per manufactures instruction, on fair faces of brick walls or concrete surfaces finished even and smooth without using extra cement in any height, complete all as specified and directed by Engineer-in-charge. Note:- Water proofing compound shall be measured and paid separately)

Material and labour for rendering 5mm thick cement plaster in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on ceiling in any height, complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of new plastered or unplastered surfaces and applying two coat of oil bound distemper on wall over a coat of primer, complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion exterior grade over a coat of primer, including all necessary scaffolding etc., complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed by Engineer-in-charge.

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish 2mm as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge. (Note:- After painting, cleaning of all floors, glass, Supply & Fixing Furniture by own arrangement).

Material and labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying one coat of oil bound distemper including a wherever requred of wall putty including smooth roller finish, complete all as specified and directed by Engineer-in-charge. (Note:- After painting, cleaning of all floors, glass, Supply & Fixing Furniture by own arrangement).

Material and labour for preparing of old decorated surfaces of walls by scrapping old paint with steel wire brush, wash the surface throughly and applying one coats of acrylic emulsion exterior grade including necessary steel scaffolding + green cloth all round the work side for any position / height, complete all as specified and directed by Engineer-in-charge. (For Bldg upto GF to Four Floor) Note:- Necessary safety precautions need to be taken before applying paint.

Material and labour for preparing old plastered / decorated surface of ceiling including cornices etc by brooming down and applying one coat of oil bound distemper with smooth roller finish, complete all as specified and directed by Engineer-in-charge. (Note:- After painting, cleaning of all floors, glass, Supply & Fixing Furniture by own arrangement).

Material & Labour for preparation of old painted concrete surfaces of any description over 10 cm grith or width not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-charge.

Material and labour for preparing of old/new surfaces of walls/ceiling washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers and applying two coats of Rain coat manufactured by Dr Fixit of Piddilte Industries Ltd. (shade to match the existing paint), including necessary scaffolding for work, complete all as specified and directed by Engineer-in-charge.

Material and labour for applying texture paint of desired finish as approved by GE over a coat of interior / exterior wall primer which includes preparation of old decorated surfaces, cleaning of loose paint, grease, growth of fungus, algae or moss by using wire brushing and watering, complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of pavement surfaces and painting of lines, arrows, letters, etc on roads, pavements and like exc 10 cm wide with road marking paint, complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of new steel surfaces exceeding 10 cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-charge.

K B N TRADERS (BID ID -3112400)

K K Construction Co (BID ID -3125587)