Pdg. Street light in widening and strengthening of Jurasi Khurd to Gurudwara Sach Khand Ishar Darbar in Pehowa, Distt. Kurukshetra.

Amount

Miniature Circuit Breaker & Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17a) (ii)

TP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17(a) (ii)

TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. HSR No. 31.17(a) (iii)

Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed. HSR No. 31.21 (xiv)

Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22(ii)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. HSR No. 31.22(iii)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HSR No. 31.22(v)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xi)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. HSR No. 31.22(xix)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xii)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No. 31.22(xvi)

Under Ground Cables. Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. 16 Sq. mm 4 Core Ard. Cable . HSR No. 31.26

25 Sq. mm 4 Core Ard. Cable . HSR No. 31.26

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HSR No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

(v)Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . HSR No. 31.33 (ii)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). HSR No. 31.40 (i)

Size 2.50 sqmm (3 / 1.05mm). HSR No. 31.40 (ii)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. 4-way,TP&N (Vertical)(8+12) HSR No. 31.41 ix)

Supply and erection of copper lugs including crimping etc. upto the entire satisfaction of Engineer-in-Charge of work. Size 1.5 sqmm to 2.5 sqmm HSR No. 31.45

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including digging & refilling of Earth including cost of suitable size soicket /coupler for HDPE pipe including the cost of labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of the work. HDPE pipe 63 / 50mm outer dia / inner dia HSR No. 31.67 (i)

Supply & erection of Hot Dip Galvanised octagnol pole of 3mm thickness, with baseplate including cost of nut & bolts & all accessories as supplied by the manufacture incuding cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanised pole complete with door locking arrangement. Terminal plate consisting of 2Nos. 100A , 4pole neutral links including connection etc. with suitable connecting arrangement for 2No. MCB's /Kit kat including cost of R.C.C. 1:1:5:3 for foundation of size 0.7 M X0.7 M X1.8 M with minimum 8Nos. 12mm dia logitudinal MS reinforcement rods with ring of 8mm dia not more than 200mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto entire satisfaction of Engineer in charge of the work. 8 Mtr. Long pole with top dia 70mm and bottom dia 135mm with base plate of size 225x225x16mm. HSR No. 31.68 (ii)

Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 63 amp HSR No. 31.69 iv

HIGH MAST POLE Supply, installation, Testing and commissioning of 12.5 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 Nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge. Thickness of Top Section = 3mm (Minimum) Bottom Section =3mm (Minimum) Top Dia = 150mm Bottom Dia = 360mm Thickness of Galvanization Top = 65micron (Min.) Bottom = 85micron (Min.) HSR No. 31.83 (i)

Supply & Erection of single arms bracket made of 40mm dia GI pipe B class ISI 1.50 mtr. Long with coller of GI pipe 75 cm Long duly fitted on 7Mtr. Otacgonal pole and top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. to complete the job in all respect upto the entire satisfaction of Engineer-incharge. NS-1

Supply and erection of LED Streetlight Luminaries 90 watt of Bajaj make (Model No. BRTFG 90W LED I WW (EDGE LED: Warm white street light luminaire) (169961) LED street light in warm white colour with pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips, Crompton, Bajaj, Wipro, Surya Roshni & GE). NS-2

Supply and erection of LED Flood Light 150 watt of Bajaj make (Model No. BJFL 150W LED I WW Warm White (169980) (AMAZE LED) 3rd generation LED floodlight luminaire with ultra sleek, light weight and with secondary optics, made of pressure die-cast housings with IP 66 rating complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips, Crompton, Bajaj, Wipro, Surya Roshni & GE). NS-3

Supply and erection of 65 Amp. 3 Pole/230V Astronomical automatic time switch of Indo Asian make Cat No. TL065ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. NS-4

Supply & erection of enclosure for MCCB 32/63 Amp. (Indo asian make) Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. (similar make of L&T, Havells & Standard). NS-5

Pdg. trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. NS-6

Const. of R.C.C Foundation for 12.5 Mtr. High Mast with MS reinforcement rods for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. NS-7

GARG ELECTRIC STORE