Spl repair of Bldg No T 35 T 37 and T 38 at certain location and renovation of 01 X Offrs toilet at Zone 1 at Tezpur under GE S Tezpur

Amount

Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile stenght of 550 MPA as in roof covering /cladding to wall ridge,eaves board valley,Sunshade fixed with self tapping screws including all fixing arrangements with MS flats etc(steel shall be measured and paid seperately) complete all as specified and as directed.

Dismanting timber scantling 40 Sqcm and over in section in any position in framed work or unframed work complete all as specified and as directed.

M&L Second Class Hardwood in Scantlings Wrought Timber Framed and fixed complete all as specified and as directed.

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 2 mm dia double GI J type adjustable suspendor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from any type of truss complete all as specified and as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm complete all as specified and as directed.

M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair complete all as specified and as directed.

M&L One coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

M&L 15mm thick rendering in C.M. (1:4) on fair faces of brick work/lathing finished even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in C.M. (1:6) on brick work/lathing finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Old wall surface including properly removal of existing paint surface and fillings the cracks with exterior wall care putty and applying one coat of weather coat water proofing paints complete all as specified and directed.

M&L for Preparation of newly plastered or concrete surface and applying two coats of exterior emulsion paint(Apex) over priming coat of damp proof primer over 1 mm thick layer of wall care putty by smart painting method complete all as specified and directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

Demolition of reinforcement cement concrete in roofs, floors(other than ground floor),beams, staircases, landing, chajjas,slabs, precast slabs and similar suspended work complete all as specified and directed.

M&L for RCC type B1 1:2:4 (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like

M&L Pre-cast Reinforced Cement Concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate) as in Cover Slab of Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed. NOTE : Reinforcement shall be measured and paid separately under relevant Item.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crankingbinding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specefied and directed.

S & F Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantilevers,ncluding supports, etc for rough finished flat surfaces of concrete all as specified and directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm complete all as specified and directed.

M&L for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm complete all as specified and as directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath ,surface drains, saucer drains etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler complete all as specified and directed.

M&L for 50 mm PCC 1:3:6 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed

M&L for 50 mm PCC 1:2:4 ( 20 m graded stone aggregate) as in floor even and rough to recieve the topping layer as in sub base all as specified and directed

M&L Applying one coat of Oil bound distember to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and as directed.

M&L Applying two coats of acrylic emulsion distemper by smart painting method to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L, 15 mm thick rendering in C.M. (1:3) on brick work, inside and outside of manholes, finished even and smooth without using extra cement complete all as specified and as directed.

Cutting into existing manhole for connection new drain making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 150mm dia complete all as speci -fied and as directed.

M&L PCC 1:3:6 type C1 20mm grade aggregate as in coping, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed or similar work complete all as speci -fied and as directed.

M&L PCC 1:2:4 type B0 12.5 mm graded aggregate as in sub base,water trough and the like including weathering, slightly rounded or chamfered angles and throating, as directed, coping or similar work complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 600 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in epoxy grout to match over 10 mm screed bed in Cement mortar (1:3) complete all as specified and directed.

Non- Skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L Roughening surfaces of old Concrete Floors, etc. by Picking, Sweeping, Clean and Washing down with Water to remove Dust, etc. and brushing Neat Cement Slurry @ 3.0 Kg per Sqm, complete all as specified and as directed.

S&F cabinets of 18 mm thick PVC Coloured sheet of any colour with shutter with fixing hinges including end liping and dismantling of old woodenpartition and cabinet.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction.Complete all as specified and as directed.

S&F Solid PVC Moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, complete all as specified and as directed.

S& F Factory made PVC solid moulded Door Shutter, 30 mm thick with board core (styles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed.

S&F 35mm factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides covered with decorative veneer of 4 mm on both sides with lipping/frame, to match complete all as specified and directed.

S&F Stainless steel butt hinges 100 mm long complete all as specified and directed.

Supply and fix of stainless steel handles fancy/ decorative type 150 mm size complete all as specified and directed.

S&F Stainless steel, barrel tower bolt decorative type 150mm long complete all as specified and directed.

S&F stainless steel, sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.complete all as specified

S & F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwansteel spring all as specified and directed.

S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.

S & F magnetic catch suitable for cabinets and shelves.complete all as specified and directed.

S&F Powder coated aluminium frame(minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coated aluminium(Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F Powder coated aluminium(Thickness or powder coating not less than 50 micron). window and ventilator shutters, sliding type , aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangment etc.complete all as specified and as directed.

M&L Vitrified Ceramic tiles (premium) Dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick creed bed in cement mortar (1:6) complete all as specified and as directed

M&L Vitrified Ceramic tiles (premium) Dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick creed bed in cement mortar (1:4) complete all as specified and as directed.

S&F PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M&L 2nd class HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 13 sqcm & n exe 25 sqcm fixed with nails including dismantling complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for for foundation, sewage pipe line etc. and getting out in soft/loose soil all as specified and as directed by Engr-in-Charge.

M & L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repairs Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares in each pane in squares.complete all as specified and as directed.

S&F 5.0 mm thick sheet glass heat absorbing/tinted quality and glazing with oil putty in squares in each pane in squares.complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed.

S&F in repair 20 to 25 mm dia stainless steel curtain rod including two Nos of socket and end bracket complete for doors/window opening complete all as speci-fied and as directed.

M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border with 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

S&F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down old one complete all as specified and as directed.

S&F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe taking down old one complete all as specified and as directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20 mm dia D type complete all as specified and as directed.

S& F in repair of Towel Ring of stainless steel fixed and including Chromium plated brass screws complete all as specified and directed.Model No: ACN-1121NM ,Make: Jaquar or Equivalent approved by GE

S&F in repair Soap dish Chromium plated , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 32/40 mm dia PVC waste pipe for WHB/Kitchen sink including all necessary fixing arrangement as in repair complete all as specified and as directed.

S&F PVC (SWR) Gully Trap 125mm/110mm bore (dia) Outlet, Plain with Grating and Jointing to Waste Pipe with Solvent Cement, as in repair complete all as specified and as directed.

S&F PVC (SWR) Nahani/Floor Trap 75mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement as in repair complete all as specified and as directed.

S&F 100mm dia stainless steel grating fixed in position with white cement as in repair complete all as specified and directed.

S&F 75mm dia stainless steel grating fixed in position with white cement as in repair complete all as specified and directed.

S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed to stainless steel sink / glazed ware basin including necessary fixing arrangement as in repair complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair chromium plated Corner glass shelf with bracket complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and directed.

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old one complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old one complete as all specified and as directed.

S & F Unplasticised PVC (UPCV) pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe taking down of old steel tubing.complete all as specified and directed

S & F Unplasticised PVC (UPCV) pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe taking down of old steel tubing.complete all as specified and directed

S&F Stop Valve 15 mm dia (bore), Cast Copper Alloy, Chromium Plated Fancy type screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipes or for Unions and fixed-in-repairs, complete all as specified and as directed.

S&F auto closing urinal valve CP alloy with flange for 15 mm bore.Model No PRS-077 of make Jaquar.

S&F 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and ditected

S&F in repairs flush pipe of PVC 32 mm dia ,for low level flushing cistern to squatt pattern closet including all joints and making good to floor complete all as specified and as directed.

S&F Counter top wash hand basin white flat of size 500X535X180mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.Make-Jaquar,Model No-KUS-WHT-35601 or equivalent make of Prayag/Parryware/Prima

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F 15 mm bore bib taps(not less than 575 gm), cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed.Model No: CON-041KN ,Make: Jaquar or Equivalent approved by GE

S&F 15 mm bore pillar tap (not less than 665 gm), fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified and directed.Model No: AQN-1153S ,Make: Jaquar or Equivalent approved by GE

Taking down unserviceable PVC (SWR) Pipes & Fittings of any size or pattern and in any Position (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

Fixing only PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

Fixing only PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

M&L Writing letters or figures(Block, Roman, Italic or Indian n.exc 30cm high complete all as specified and as directed.

M&L writing stops, commas, short lines, dashes, hyphens, brackets etc.complete all as specified and as directed.

M&L Plain Cement Concrete type D2 (1:4:8) using 40 mm graded aggregate as in Foundation, Filling and Mass Concrete, complete all as specified and as directed.

M&L 2nd class HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails including dismantling complete all as specified and directed.

S&F Wire netting (bird mesh) of galvanised steel wire 0.71 mm dia 12 mm mesh size fixed with tinned tacks of wire staples complete all as specified and directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, nexc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

S&F 5 mm thick mirror with decorative frame of size of face size 40 to 50 mm mounted on 10 to 12 mm water proof plywood and fixed in to chromium plated / stainless steel cup washers of approved pattern complete all as specified and as directed.

Taking down existing damaged water closet alongwith complete PCC from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

S&F 08 mm thick curved shaped urinal partition with frosted glass of size 900x450 mm including fixing accessories, fixing bolt, etc complete all as specified and directed.

S&F Automatic soap dispenser of capacity 0.8 litre of aluminium/abs with chromium finish.Make-Jaquar,Cat No SDR BLC-DJ0160 AS

S&F Flash touch free infared dryer 1150 watts rated poer and carbon brush motor of stainless steel body.Make-Jaquar,Cat No HDR-SSF-AK2807 AS

S&F Sensor based auto flusher concealled type battery operated for urinal pot including all fittings and fixture.Make-Jaquar,Cat No STL-51087

S&F in repair 15mm bore health faucet (ABS body) with 8mm Dia, 1.2 m long flexible tube & wall Hook Model No: ALD-CHR-573 ,Make: Jaquar or Equivalent approved by GE

S&F in repair Concealed stop cock cast copper alloy CP with wall flange for 15mm bore Model No:CON-083KN ,Make: Jaquar or Equivalent approved by GE

S&F in repair chromium plated Corner glass shelf with bracket complete all as specified and directed. Model No: ACN-1173N ,Make: Jaquar or Equivalent approved by GE

Vitreous China Urinal, Full stall type, flat back white in colour (excluding flushing cistern, flush pipe and waste pipe) including fittings and fixtures as SS bottal trap,fixing bolt,CP Waste coupling complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement with spreader all as specified.Model No: URS-WHT 13253N ,Make: Jaquar or Equivalent approved by GE

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) single piece with PP soft close seat cover, hinges, duel flush chistern fitting and complete accessories set in white colour.Make Jaquar,Cat part No CNS-WHT--851P180SPP

S & F pillar tap 15 mm dia, cast copper alloy with capstan heads, fancy tube, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.Make Jaquar,Cat part No FON-CHR-40011

Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc.complete all as specified and as directed by Engineer-in-Charge.

Taking down unserviceable rusted / damaged MCB DBs / MCCB of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.

Taking down ceiling fan/wall mounted fan/ Exhaust fan of any size and sweep including cable ends, worn out blades and and keep in Safe Custody for removing to store, complete all as specified and as directed.

Taking down old burnt/unserviceable submain wiring with aluminum/copper conductor PVC insulated cable of any size drawn through PVC casing caping/ PVC Conduit pipe including GI wire accessories etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down old unserviceable Flourescent/LED light fittings any type and size and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for Point wiring for one Light/Fan/Bell point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and existing non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed with and including modular metal flush box and Modular white Cover Plate with Frame for fixing switches, sockets, inculding one run of 1.5 sqmm FRLSH PVC insulated unsheathed copper cable FRLSH grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required (as per the existing condition) all as specified and directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.

All as per Ser item No.138 above but for 5 amps socket on same board with other switches

M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including Modular PVC flush box and Modular White Cover plate with frame 1M to 8 M for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No. 140 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge.

All as per item No. 140 here-in-before but one 3 pin 5 amps switch socket outlet on the independent board with other switch complete all as specified and directed by Engineer-in-charge.

M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point including Modular PVC flush box and Modular White Cover plate with frame 3 module for mounting switches, sockets, for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

S&F Modular switch flush type, 6 Amp, one way ,1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 5 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 5 pin combined 2 module complete all as specified and as directed.

S&F Ceiling rose surface backelite 65x50 mm having 3 terminals complete all as specified and as directed.

S&F Modular type fan regulator Step type ,100 Watt, one module, 230V AC complete all as specified and as directed.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 6 Sqmm conductor as main wire and one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

S&F Energy efficient LED fittings of capacity 20W ,4ft suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length including taking down old unserviceable one complete all as specified and as directed.

S&F Energy efficient LED fittings of capacity 10W, 2 Ft suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length including taking down old unserviceable one complete all as specified and as directed.

S&F 30/36 Watt LED Panel fitting False ceilling mounted ( 2 ft x 2 ft ) including accessories , colour temp >= 5700K with die cast body with premier diffuser ensuring glare free light including taking down old unserviceable type downlighter complete all as specified and directed by Engr-In-Charge .

S&F MCB SPN DB made up with sheet metal single door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and as directed.

S&F MCB, current carrying capacity 6 to 32 Amps, SP, 240 Volts ,'C'- Curve breaking capacity 10 KA in the MCB DB complete with connection testing and commissioning complete all as specified and as direct

S&F MCB, current carrying capacity 32 Amps, SPN, 240 Volts ,'C'- Curve breaking capacity 10 KA in the MCB DB complete with connection testing and commissioning complete all as specified and as direct.

S&F in replacement LED Bldg security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including GI Pipe 40 mm dia bracket 1.2 mtr in length bent to shape of 120 degree with MS flat bracket 2 Nos, washers, nuts, bolts etc. complete all as specified and as directed.

S&F LED light fitting 9/10W Environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head Back-lit LED luminaire comprising of high brightness LEDs. complete all as specified and as directed.

M&L for rewinding of ceiling fan,1200mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling with new bearings both complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S&F Exhaust fan AC single phase 240 V of size 450mm sweep with louver specially designed for kitchen in domestic ventilation plastic body and blade, finish high quality engineering plastic heavy duty motor, protective bird guard complete all as specified and as directed.

S&F Exhaust fan AC single phase 230 V of size 250mm sweep PVC Body with louver specially designed for kitchen in domestic ventilation plastic body and blade, finish high quality engineering plastic heavy duty motor, protective bird guard including cutting hole and making good disturbed surface. complete all as specified and as directed.

S&F wall mounted fan AC single phase 240 V of size 300 mm sweep(SSTORM 2), metal body and blade, powder coated metalic finishes heavy duty motor, complete all as directed and specifed.

M/L for Earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GI and GI tubing 15 mm bore, light grade for earth lead protection up to main earth test point and includingconcrete pit in PCC (1:3:6) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation earth work Electrical plate no 3 of SSR Part-I.complete all as specified and as directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

MAHENDRA BARUAH (BID ID -3151947)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3151871)

D G Corporation (BID ID -3148200)