WELCOME MAINT TO OFFR MD ACCN UNDER THE AREA OF AGE B/R-I OF GE (ARMY) NO.1 JODHPUR

Amount

M&L for preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., plaster or un- plastered surfaces (old decorated surface) and applying two coats of white wash on wall, complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down,smoke shoot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash on ceiling, complete all as specified and directed.

M&L for preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and applying two coats of colour wash on wall, complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing and efforescent salts and applying one coat of distemper oil emulsion, complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplastered on wall and applying two coat of cement base paint as approved coloured and shade by GE, complete all as specified and directed.

M&L for preparation of old surface using necessary filling compound of wall care putty to obtain smooth regular/even finish using sand paper and applying one coat of plastic emulsion complete complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping distempered surfaces and applying two coat of exterior acrylic emulsion on paint old plaster surface as per the manufacturer’s instruction over a coat of primer/ wall putty complete all as specified and directed.

M & L preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water including complete removal of existing treatment. complete all as specified and directed.

M & L applying 2mm thick White Wall Care Putty on wall surfaces complete all as specified and directed.

M & L applying two coats of plastic emulision paint over & including M&L a single coat of primer on wall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note :Preparation of surfaces, complete removal and putty work shall be measured and paid against Item No. 09.

M & L applying two coats of oil bound distemper over & including M&L a single coat of primer over on prepared wall putty surfaces, complete all as specified and directed. Note : Preparation of surfaces, complete removal and putty work shall be measured and paid against Item No. 09.

M& L for two coats of texture paint over & including M&L one coat of wall putty on wall of old plaster surface, complete all as specified and directed.

M & L preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (FIRST QUALITY) of any tint, complete all as specified and directed.

M &L preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (First quality) of any tint, complete all as specified and directed.

Taking down carefully cement plaster/ spalled out concret from wall, ceiling of RCC slab, sunshedes, beams, etc by chipping out lightly including necessary scaffoding etc., complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc finished even & smooth without using eaxte cement complete all as directed .

M&L for 15mm thick rendering in CM 1:4 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

M & L preparation newly plastered surface of wall and apply two coats of oil bound distemper over a coat of primer including 1-2mm thick birla white wall care putty on wall surfaces complete all as specified and directed.

M&L for three coat of white wash over newly plastered surfaces incl preparation of ceiling etc all as specified and directed.

M&L preparation of newly plastered surface and applying two coat of cement based paint over & including single coat of alkali resistant primer complete all as directed

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , sub base etc complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement complete all as specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L for tile/ Endura/ textured finished external grade tiles of 30cmx30cmx10 mm thick, set, jointed and pointed in white cement and pigment match to colour, laid over and including screed bed or bedding layer of 20mm thick in CM 1:4 complete all as specified and as directed.

M&L PCC solid building blocks 10cm thick type B1 1:2:4 set in cement mortar (1:6) all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub floor under tiles, complete all as specified and directed.

M&L non skid ceramic colour joint free tiles 6 to 7 mm thick of size area exc 0.06Sqm but nexc 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including M & L for 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M & L Vitrified double charged cermic tiles light shed 10 mm thick (squre/retangular) polished, area exc 0.18 Sqm but nexc 0.36 Sqm of each tile as in floor etc set and jointed in neat cement slurry and pointed in white or colured cement including M & L for 15 mm thick screed bed in CM 1:6 to match, complete all as specified and directed.

All as per item No. 32.00 here-in-above but area exc 0.36 Sqm but n.exc 1.20 Sqm of each tile.

All as per item No. 32.00 here-in-above but as in skirting surface inluding 10 mm rendering in Cm 1:4 complete all as specified and directed.

M&L for glazed coloured ceremic tiles in vertical surfaces as in skirting, dado & etc., size 300x600x7mm/ 300x450mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and directed.

S & F in repair 18 / 19 mm thick pre-laminated particle boardexterior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round / exposed faces, complete all as specified and directed.

S & F second class hard wood (sal) plain, fillets, square, rectangular or triangular in section clean sawn, secured with nails of sectional area exc. 13 Sq cm but not exc. 25 Sq cm, complete all as specified and directed.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm, complete all as specified and directed.

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification, complete all as specified and directed.

M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

Extra over PVC boards for lipping 2mm thick 18 mm wide, complete all as specified and directed.

S&F '0' degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample, complete all as specified and directed.

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and directed.

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple, complete all as specified and directed.

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers, complete all as specified and directed.

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil, complete all as specified and directed.

S & F PVC cupboard knob fixed with nut , screw and washer of mild steel bright finished size exc. 25 mm dia but n. exc. 50 mm dia (as per sample) complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Refixing in same opening shutters only of any description not exc 1.0 Sqm each, complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for 35mm thick 2nd class Hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

M&L for factory made 35mm thick flush shutters, solid core construction with block board core and veenerd face fixed on both side sunmica 0.8mm thick of door alongwith 2mm thick edges liping coloured as approved by GE, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

M & L for mild steel framed work as in grill, gratings, brackets, cooler stands etc framed steps/stairs etc complete using MS angle iron steel bars gusset plate, hold fastners etc complete all as specified & directed .

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, With Wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed .

S&F in repairs powder coated, (thickness of powder coating not less than 50 micron), aluminium anodised frame for sliding doors, windows, ventilators with one or more rebates including connecting accessary, joining cleat for fixing etc. complete all as specified and directed .

S&F in repairs powder coated (thickness of powder coating not less than 50 micron), aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, screws, fitting such as alumimium hinges type B-21 100mm long (4 Nos) suitable handles 2 Nos, tower bolt 2 Nos in each door, including locking device with 2 key sliding roller anodised aluminium snap beading screws etc. complete all as specified and as directed. Note: Glass & Wire gauge measured and paid seperately.

S&F in repairs anodised aluminium powder coating Minimum thickness 50 micron for window and ventilator shutters, fixed or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified Note: Glass & Wire gauge measured and paid seperately.

S&F standard powder coated coloured aluminum anodized Deco grill ‘U’ channel 25x12 mm with and including perforated aluminum wire mesh weight not less than 550gm/Sqm over grill complete all as specified and directed .

M&L for 5 mm thick tinted/frosted glass fixed with alu channel/snap grid and rubber beading packing in door , windows and ventilator and securing complete all as directed

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S & F lock 2 levers vertical type size 100 mm size brass body for aluminium door (as per sample) complete .

S & F in repairs hydraulic door closer designation No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (die cast) body complete.

Taking down steel window/ventilator complete all as directed.

M&l for Repair to steel window including taking down, replacement of unserviceable hinging devive box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4 complete all as directed of Engr in charge .

M & L for Taking down of existing door shutter replacing defective shutter member/ door frame and refixing the same to aluminium frame includind replacement of necessary jointing cleats, glazing clips, rubber neoprene packing, screws, fitting such as alumimium hinges type B-21 100mm long (4 Nos) suitable handles 2 Nos, tower bolt 2 Nos in each door, including locking device with 2 key sliding roller anodised aluminium snap beading screws etc , complete all as specied and as directed by Engineer-in-Charge. (NOTE:- Replaced defective member to be measured and paid seperately under respective items of this BOQ )

S&F of aluminium anodised tower bolt 200 mm long complete all as specified and directed.

S&F aluminium anodised handle of size 150mm long complete all as specified and directed.

S& F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S & F butt hinges 100 mm long,extruded aluminium alloy with mild steel hinge pin anodised type - 21 for PVC door complete all as specified and directed.

S & F of mild steel butt hinges 100 mm size complete all as specified and directed.

S & F 100 mm size single action door spring hinge welded to steel frame complete all as specified and directed.

S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and directed.

Hackilng out old broken glass (any thikness, size quality or description) from metel frame including punching or drilling cut old glazing pins & providing fixing new ones.

S&F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.

S&F for 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repairs stainless steel decorative type 25mm curtain rod with fixing brackets nobs, etc complete all as specified and directed.

M&L for high quality looking mirror 8mm thick with fancy type beading fixed to wall with chromium plated screw area n exc 2.0 sqm fixed in repairs complete all as specified and as directed

S&F in repairs of stainless steel sinks with drainage boards ISI marks of 01 mm thick size 915 x 460 mm bowl size 410 x 330 x 160 mm including waste coupling waste pipe brackets made high grade AISI-304 stainless steel, complete all as specified and directed.

&F in repair stainless steel kitchen plate rack of size 900x750x250mm made out of 0.60 mm thick stainless steel sheet complete all as specified and directed..

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

S & F in repair Vireous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cictern and flush pipe ) with seat cover complete all as specified and directed.

S & F in repair Vitrous china wash basin as , white flat back size 550x400 mm including with CP coupling ,pvc waste pipe, MS brackets, CP pillar taps Single lever swan neck 15mm bore complete all as specified and directed.

S&F in repairs fancy type vitreous WHB oval type fixed to granite of bracket or erecting stand with waste pipe and pillar taps complete all as specified and directed.

S & F in repair Bidet spray (Health faucet) with 1 meter PVC tube and holder, completed.

S&F in repair 15 mm bore CP brass two way angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe fixed in repair. Make- Jaquar and Equivalent

S&F in repair 15 mm bore CP brass angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe fixed in repair.

S&F in repair of 15 mm dia CP bib, tape fancy type CP for pipe all as handle scrwed both ends for iorn pipe fixed in repair.

S&F 15mm bore central hole basin mixture popum waste system with 450 mm long copper pipe and brass nuts ISI Marked sitable for over head counter, complete all as specified and directed.

S&F CP Wall mixture 3-in-1 system fancy type, cast copper alloy,with capstan heads,chromium plated,screwed down high pressure 15mm bore, Hot or Cold with with or without legs,screwed for iron pipe fixed in repairs, complete all as specified and directed.

S&F Brass chromium plated over head shower rose 150x150mm size square with shower arm including fixing to steel pipe or union in repairs, complete all as specified and directed.

S & F in repair 15 mm bore single lever swan neck sink mixer, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S& F as in repairs 15 mm bore stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified .

S &F in repair 20 mm bore stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union all as specified specified.

Material and labour 75mm bore Cast iron floor trap/Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Material and labour 100mm dia Cast iron floor trap/Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply & Fixing in repair low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and including pvc connection complete all as specified and directed.

S&F for 500 Ltrs capacity of tank rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position white/coloured including tank led cover with fixing arrangement inlet/outlet/over flow check nut etc including dismantling existing PVC/ RCC water tanks complete all as specified and directed.

S&F for 1000 Ltrs capacity of tank rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position white/coloured including tank led cover with fixing arrangement inlet/outlet/over flow checknut etc including dismantling existing PVC/ RCC water tanks complete all as specified and directed.

S&F for 2000 Ltrs capacity of tank rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position white/coloured including tank led cover with fixing arrangement inlet/outlet/over flow check nut etc including dismantling existing PVC/ RCC water tanks complete all as specified and directed.

S & F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors approns etc complete all as directed

M & L 18 to 20 mm thick granite(approved quality by user ) in WHB counter top etc laid in dry bedded in pinning to wall including cutting rubbing grinding and polishing to edges and rounding off granite polish slab for smooth finish complete.

S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass of size 250 mm size triangle with CP brackets, gaurd and railing complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide 600mm long with aluminium alloy brackets and gaurd and railing 60cm long complete all as specified

S & F in repair toilet paper holder chromium plated complete all as specified and directed.

S & F in repair brass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.

S & F in repair plastic water closet seat white closed pattern with flat bottom and cover and aluminium hinging device complete all as specified and directed.

S & F in repair CP towel ring 20 mm dia fancy type as per sample approved by Engr in charge complete all as specified and directed.

M & L for CP jet spray as in repair with 1 mtr tube as specified and directed as per sample approved by Engr in charge complete all as specified and directed.

Taking up or down steel water tubing and connections, including cleaning for re-fixing or remove to store or credited to contractor for the following bore pipe complete all as specified and directed:-

All as per item No. 118 here-in-above but 20 mm bore pipe

Supplying and laying of 16mm dia of CPVC pipes SDR 11 with (plain or special use as per site condition) all brass fittings (brass elbow, brass tee male / female threaded brass adopter etc) CPVC SDR 11 fittings on walls/ceiling or laying in floors confirming to IS 15778:2007 upto date complete all as specified & directed.

All as per item No. 118 here-in-above but 20 mm bore pipe

Supply, fixing, testing & commissioning of 15mm bore GI steel water tubing, medium grade, ISI marked, galvanised including short lengths, fixed to walls / pillars with MS clamps or ceilings or laid in floors / tenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc) of 15mm bore of GI pipe, complete all as specified and directed"-

Taking down existing cascade pattern EWC flushing cistern (one piece) and replace of internal kit washer/syphon replaced with ISI marked as per direction of Engr-in-Charge and make the same in serviceable condition complete all as specified Note :- The internal flushing kit/syphon use as per the existing make.

M&L for Elevated 3D colour stone finish wall tiles of size 300x600x10mm thick, laid in vertical surface dado/ skirting joint free etc, set and jointed in neat cement slurry and pointed in colouring pigment to match the shade of tiles including 10mm thick rendering in CM 1:4 over stone masonary surfaces finished even & rough to receive tiling complete.

Disconnecting existing PVC tank exc 250 ltrs & not exc 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning (Cleaning and removing all scale and dirt, etc; from tanks and from mouth of circulating pipe etc) and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

All as per item No. 125 here-in-above but in tank capacity exc 500 ltrs and not exc1000 ltrs.

S&F one pieace vitreous china wash down EWC with and including inbuilt flush tank with seat cover Fixing Accessories etc complete all as specified and as directed.

M& L for roof treatment in the following stages :- (a) first Course : M&L for 15 mm thick plaster with CM 1:3 mixed surface even and smooth with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately). (b) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, including taking down of existing treatment complete in all respect as per the direction of Engr-in charge/ consultant. Also, proper surface preparation along with covingat corners is must.

M&L for PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb/pedding including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with WPC than painting with bitumen grade VG 30/ 40 over a coat of bitumen primer putting 50 micron polythene than filling with PCC 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 600x50 mm bore GI water pipe light grade spout incliding demolition and Removing of existing filling in sunken floor wc/ bath/ kitchen and complete all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces as per existing finishes) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed. Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates

All as per Sr. item No. 132.00 here-in-above, but suitable for One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per Sr. item No. 132.00 here-in-above, but suitable for One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per Sr. item No. 132.00 here-in-above, but one light point controlled by two, two-way switches.

All as per Sr. item No. 94.00 here-in-above, but with using 2.5 Sq mm single core multistanded copper conductor cable (FRLS)including 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 5 pin 15 Amp socket outlet on independent board .

M&L for point wiring complete with using 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked passing in existing PVC/ steel conduit fixed on on surface of wall / roof / ceiling or concealed etc in sunken pressed steel terminal boxes in wall, including 3.00 mm thick plastic laminated hylem sheet and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly, suitable for One light/fan/bell point controlled by one, one way switch, all as specified, directed.

All as per Sr. item No. 137.00 here-in-above, but suitable for One socket outlet 3 pin 5/6 Amps on same board

All as per Sr. item No. 137.00 here-in-above, but suitable for One socket outlet 3 pin 5/6 Amp on independent board

All as per Sr. item No. 137.00 here-in-above, but suitable for One light point controlled by two, two-way switches

All as per Sr. item No. 137.00 here-in-above, but with using 2.5 Sq mm single core multistanded copper conductor cable (FRLS) and 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M&L for Point wiring (Modular Concealed) using approved colour coding as per IS Red/Yellow/Blue, Black and green for single phase circuits) with multi stranded copper conductor 1.5 Sqmm nominal cross area single core PVC insulated and unsheathed FR LS cable 1100 Volts grade ISI 694 marked with valid CML No. in and including medium grade PVC concealed conduit (including Cutting Chases and make good the distrubed surfaces as per existing finishes) of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for wall/roof /floor etc with pressed flush metal boxes covered with inner plates & outer plates etc suitable for mounting of Modular switches & sockets including PVC insulated multi stranded copper conductor FRLS 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continully conductor to commonearth and connecting to earrth dolly suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed. Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates

All as per Sr. item No. 142.00 here-in-above, but suitable for One socket outlet 3 pin 6 Amps on same board

All as per Sr. item No. 142.00 here-in-above, but suitable for One socket outlet 3 pin 6 Amp on independent board

All as per Sr. item No. 142.00 here-in-above, but suitable for One light point controlled by two, two-way switches

All as per Sr. item No. 142.00 here-in-above, but with using 2.5 Sq mm single core multistanded copper conductor cable (FRLS)and 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .

S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed.

S&F switch piano, flush type, single pole, two way, 5/6 Amps, 230 Volts complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed.

S&F bell push, 5/6 Amps, 230 Volts complete all as specified and as directed.

S&F socket out let flush type 6 amp 3/5 pin suitable for 6 Amp plug top 230 V complete all as specified & directed.

S&F socket out let flush type 3/6 pin suitable for 16 Amp plug top multipurpose 230 V, complete all as specified & directed.

Supply and fix bell AC ing dong type 230 volts, complete all as specified & directed.

Supply and fixing in replacement repair bell AC ing dong type 230 volts incl taking down old unserviceable bell, complete all as specified & directed.

Supply and fix fan regulator electronic switch/ socket type complete all as specified and directed.

S&F lamp holder insulated body with back plate batten/angle type for batten fittings incl taking down old unserviceable holder complete all as specified and directed.

Supply and fix in replacement fan capacitor 2.5 m.f.d for ceiling Fan, incl taking down old unserveable capacitor all as specified and directed.

Supply and fixing in replacement ceiling rose 3 terminals complete incl taking down all as specified and directed.

Supply and fix Modular switch any type and make 6 amp one way 230 V incl dismantling of old unserviceable switch of any make all as specified & directed .

Supply and fixing in replacement Modular switch any type and make 16 amp one way 230 V incl dismantling of old unserviceable switch of any make all as specified & directed .

Supply and fixing in replacement Modular socket Any Type and make, 6 amp 3 Pin one way 230 V all as specified & directed .

Supply and fixing repair Modular socket Any Type and make, 16 amp 5 Pin one way 230 V incl dismantling of old unserviceable switch of any make all as specified & directed .

Supply and fixing Modular switch any type and make 6 amp two way 230 V dismantling of old unserviceable switch of any make all as specified & directed .

Supply and fixing Modular fan Regulator step type and make, 100 watt , 230 Volts ismentling of old unserviceable regulator all as specified & directed .

Supply and fixing Modular Bell push any type and make 6 amp one way 230 V taking down old UNSV bell push all as specified & directed .

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as out going SPN 12 way complete incl dismantling of unservceable DB, complete all as specified & directed.

S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 63 to 100 Amp 10 KA TPN MCCB as incoming complete incl dismantling of unservceable DB, complete all as specified & directed.

Supply and Fix in replacement MCB Single pole"B" series 5-32 Amps ISI marked incl dismantaling old unserviceable MCB SP, complete all as specified & directed.

Supply and Fix in replacement MCB Single pole & neutral "B" series upto 63. Amps ISI marked incl dismantaling old unserviceable MCB SPN, complete all as specified & directed.

Supply and fixing in replacement MCB TPN B Curve 63 to 100 Amps Make incl disntaling of old unserviceable TPN MCB, complete all as specified & directed.

Supply and fix in replacement 2-Watt LED Wall Light (bed light) for reading incl taking down old UNSV light , complete all as specified & directed.

Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders LED lamp suitable for roof ceiling includin gconnecting up with three core flexible copper conductor cable of suitable size complete incl taking down old UNSV light, complete all as specified & directed.

supply and fix in replacement Spot light 6 Watts Black/ white Body LED Spot Light, Focus Light (Warm White) incl taking down old UNSV light, complete all as specified & directed.

Supply and fixing PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit incl taking down old UNSV cable, complete all as specified & directed.

S&F Street light bracket made out of medium grade GI Pipe, bent to shape including GI Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting and taking down old UNSV GI Bracket, complete all as specified & directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable, complete all as specified & directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt cool white/ warm white 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing replacement LED lights fitting 1x 20W, 220V, Cool White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified & directed.

Supply and fixing in replcement LED lights fitting 1x 20W, 220V, Warm White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified & directed.

S&F in replacement Decorative wall light fixture made up of Polycarbonate, suitable for & including 9 W LED lamp B22 base, complete all as specified & directed.

S&F in replacement Decorative wall light fixture made up of Acrylic, Iron,Warm White, suitable for & including 9 W LED Bulb, complete all as specified & directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified & directed.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, including taking down old UNSV submain wiring complete all as directed Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length.

M&L in replacement Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal/hard/dense ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc complete

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 4 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note :- Two runs of cable 4 Sqmm (FRLS) and One run of 4 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed

Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs/Replacement unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount (iii) Makes of materials will be approved by GE in writing before commencement of work.

AMAN ASSOCIATES (BID ID -3380894)

mahalaxmi enterprises (BID ID -3380311)