Supply and laying of 3.5C X35 Sq.mm LT UG Cable to buffer end for providing unintrrupted power supply AAQMS station inside YTPS

Supply and laying of 3.5C X35 Sq.mm LT UG Cable to buffer end for providing unintrrupted power supply AAQMS station inside YTPS

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 35 Sqm...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT cable. 35 to 95 Sqmm.

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 50 Sqm...

Supplying and fixing of heavy duty double compression cable glands suitable for UG cable of 1.1KV class (metal Only) 40mm dia size.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm.

Supplying and fixing of heavy duty double compression cable glands suitable for UG cable of 1.1KV class (metal Only) 32mm dia size.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 Sqmm Copper Terminal, Apprx Wt: 26 Gm.

Earth work excavation for laying of UG cable below footpath in the following strata of soil by mechanical/manual means including removing and re-fixing the kerb and pavement stone slabs, removing and ...

Back filling the cable trench with selected available ridded earth from the trench excavation & consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achievi...

Supply and laying of bricks in the existing trench as per the directions of site engineer.

Supplying and filling sieved/riddled sand of approved quality in cable trenches including all lead, lift, watering, ramming, etc., complete.

Supplying Fly ash bricks(solid) Size:400x200x200mm.

Lime- for white washing. .

Labour charges for cutting, drilling, crimping, termination of cables, fixing of switch disconnector fuse panels, laying of route markers(Fly ash bricks), lime-white washing, earthing connections etc....

Supplying and fixing of class A(medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV.50mm.

Supplying of Switch Disconnector Fuse (Panel Mounting Cubicle Type) Three Pole & Neutral - AC-63A, 50Hz, 415V enclosure. 63 Amps. (with Bolted Type Fuse) In Sheet Steel Encl. with Fuses havells make:...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each.

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag.

Jungle cutting of trees and plants all along the cable laying about 2mtr using machinary as directed by site engineer.