Special repairs to bldg No P- 200 01 to 04 (04 x JCOs Md Accn) at Outram Line, EME School Vadodara, under GE (A) Baroda

Amount

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar complete.

Roughning surfaces of old oncrete/PCC floor by picking, sweeping clean and washing down with water to remove dust etc. Incl necessary T&P to make it suitable for laying floor tile complete.

M&L for non skid colour ceramic tile 7 to 8mm thick area of each tile joint free exc. 0.11 sqm but not exc. 0.18sqm, as in floors etc set over & including high performence adhesive similar to somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar to somani ezy grout of pigment matching to tile color over & including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 (Tile pattern and decoration shall be as suggested) complete

M&L for non skid colour ceramic tile 7 to 8mm thick area of each tile joint free exc. 0.18sqm but not exc. 0.38sqm, as in floors etc set over & including high performence adhesive similar to manufactured by somani ezifix tile adhisive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar to manufactured by somani ezy grout of pigment matching to tile color over & including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 (Tile pattern and decoration shall be as suggested) complete

M&L for non skid colour ceramic tile 7 to 8mm thick area of each tile joint free exc. 0.18sqm but not exc. 0.38sqm, as in skirting / dado etc set over and including high performence adhesive similar to somani ezifix tile adhisive mixed in cement as per manufacturer instruction & jointed with polymer modified cementetious grout similar to manufactured by somani ezy grout of pigment matching to tile color over & incl screed bed or bedding layer of mortar 10mm thick for laying floor finishes in CM 1:4 (Tile pattern and decoration shall be as suggested) complete

M&L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450x 6mm to 7 mm thick set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested) complete.

M&L for 16 to 18 mm thick machine cut green marble stone in single piece in riser of steps, skirting, dado, window (Jambs/Cills), and pillar laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 10mm thick plastering with CM 1:4 complete

M&L for 16 to 18 mm thick machine cut green marbel stone as in flooring, in steps in single piece over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 15 mm thick plastering in CM 1:6 complete

M&L for machine cut kota stone slab flooring 20 - 25mm thick set over and including high performence adhesive similar to manufactured by somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar manufactured by somani ezy grout of pigment matching to tile color including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, chullah hood and similar suspended work complete

M&L for Cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete.

Taking down cement plaster on brick/concrete surface including scrubbing down with water etc. complete

Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc, complete

M&L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete

M&L brickwork with sub class ‘B’ bricks straight or curved to any radius in half brick thick walls built in CM 1:4 complete

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall Internal in cement mortar 1:6 for finished even and smooth (without using extra cement) complete

M&L Rendering in two layer on fair faces of brick work or concrete sur-faces of wall External 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately) complete.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:4 for finished even and smooth (without using extra cement) complete

Supply only Internal water proofing compound complete.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 1 to 1.5mm average thick wall care putty and one coat of alkali resistance primer complete

M&L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distamper over & including a coat of 1 to 1.5mm average thick wall care putty and one coat of primer complete

M&L preparing new/old plastered surfaces of wall and applying 1 to 1.5mm thick layer of Wall care Putty complete.

M&L for preparing new plastered surfaces of wall and applying two coats cement base paint over a coat of alkali resistant primer on external wall complete.

M&L complete removal of existing treatment on wall surface and applying two coat of cement base paint over a coat of alkaline resistant primer complete.

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete.

M&L for preparing old plastered surfaces of ceiling and applying one coat of white wash on ceiling to match the existing surfaces complete.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each complete

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each complete

M&L factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved complete.

S&F factory made 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut, mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats complete.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame / PVC door frame with screw complete.

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete

S&F 150 mm size extruded aluminium alloy handles, febricated type anodised complete

S&F 300 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters complete

S&F solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade. The door frame shall be tied to the wall using 75/100mm long MS screw complete.

S&F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete.

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc all as per directions of Manufacturers's speciifcations complete.

S&F 125 mm aluminium alloy handles, cast type anodised complete.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F in repairs 25mm dia stainless steel 202 grade tubular curtain rod complete

S&F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved) complete

S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete

S&F of Powder coated aluminium window/ventilator shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws and grill etc as per manufactures instruction & trade pactice complete.

S&F 4.00mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips complete.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for plain cement concrete (pcc) 1:2:4 type B-0 using 12.5mm graded stone aggregate to fix hold fast complete.

M&L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

M&L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete.

S&F 16 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete .

Refixing of old galvanised mild steel medium grade of dia 20mm bore tubing and connections in new or old position with all new fittings and fixed complete to walls and ceilings or laid in floors complete.

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete .

S&F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete.

Dismantling cast iron SWR pipes, jointed in cement mortar for 100 mm bore complete.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete.

Dismantling cast iron pipes, jointed in cement mortar for 75 mm bore complete

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete.

S&F in repairs 75mm bore PVC (SWR) bends any radius complete.

S&F in repairs 110mm PVC (SWR) vent cowl complete

S&F in repairs 75mm PVC (SWR) vent cowl complete

S&F in repairs 110mm PVC (SWR) WC connector with lip ring complete.

S&F in repairs 110mm PVC (SWR) WC connector bent type to fit WC outlet complete.

S&F in repairs 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal complete.

S&F in repairs 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal complete.

S&F in repairs stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe complete

S&F in repairs stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe complete

S&F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent complete.

S&F in repairs vitreous China squatting pan of Orissa pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including P or S trap etc and provision of lime concrete bedding complete.

S&F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule

S&F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete.

S&F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete

S&F in repairs 25mm dia bore gun-metal,globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete

S&F in repairs 125mm dia chromium plated shower rose with swivel joints including fixing to GI union complete

S&F in repairs 20mm dia brass chrom plated tubular towel rail complete.

S&F in repairs 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe complete

Dismantling of water storage tank of 500 ltrs capacity complete.

S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete

Disconnecting existing tanks of 500 ltrs to 1000 ltrs capacity, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re fixing in position. Cleaning and removing of all scale and dirt etc from tanks and from mouths of circulating pipes etc. including all necessary fittings if required complete

S&F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed complete

S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps, CP waste coupling but incl brackets complete

S&F in repairs CP Centre hole Wash Basin mixer three in One 15 mm bore pipe complete

S&F in repairs 32 mm dia stainless steel waste coupling for wash hand basin complete

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm including suitable waste coupling and waste pipe complete.

S&F in repairs stainless steel wall mounted plate rack of size 900x1200X 300 mm and thickness of sheet not less than 0.50mm with provn for keeping plates and other crockery fixed with screw and rawal plug etc on wall complete

M&L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection, chajja, fins, facia, roof bands etc and making good with PCC (1:11/2:3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required and applying paint to match with the existing surface complete . (Reiforcement will be measured and paid saperately under respective item.)

M&L for Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete. (reinforcement shall be measured and paid separately)

M&L for Providing reinforced cement concrete (nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary form work complete. Note. (reinforcement shall be measured and paid separately)

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M&L for complete removal of existing water proofing treatment including plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete

M&L for 50 mm avg thick PCC padding in cement concrete type B1 (1:2:4) using 20 mm graded stone aggr with water proofing compound @2% by weight of cement finished surface even and smooth without using extra cement for laying of WPT.

M&L for 10 mm thick plaster on roof surface with CM 1:3 mixed with water proofing compound @3% by weight of cement plaster surface should be even and smooth without using extra cement complete. Note . (WPC will be measured and paid separately).

M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying actetic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minium 3.50 Kg/Sqm 3 mm thick (minium) with minium 75 mm side overlaps and minium 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete

M&L for brushing with neat cement slurry @ 3Kg/Sqm complete

M&L for Cement concrete tiles 25cm x 25cm x 22-25mm thick, m a c h i n e pressed; laid over 15mm thick cement screed in CM 1:6, set, jointed and pointed in neat cement slurry with WPC @ 3% by wt of cement in floors/roof top complete. (WPC will be measured and paid separately).

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete

M&L for 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing cone surface even and smooth without using extra cement complete

M&L for Forming 65mm deep x 10mm thick contraction (dummy joints), filled with sealing compound grade "A" complete.

Taking down shutter exc 1 Sqm but n.exc 2 Sqm each complete

M&L in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 150mm complete.

S&F in repairs Chromium plated soap dish heavy duty of size 160x90mm fixed with brass screw complete.

S&F in repairs aluminum door seal overall 40mm width gate bottom sealing strip draft stpper with aluminium plate of 18mm & nylon bristles / nylon rubber strip of 22mm of suitable section fixed to door shutter with screw complete.

S&F in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250 x 250mm fixed with CP brackets complete.

S&F in repair of sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete.

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete.

Demolition of existing PCC / lean concrete including floor tiles and removing rubbish off the premises for sunken treatment of WC/Bath complete.

M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with water proofing compound @3% by weight of cement plaster surface should be even and smooth without using extra cement for sunken treatment of WC/Bath complete. Note . (WPC will be measured and paid separately).

M&L for providing & laying APP based polymeric membrance of weight of 3 kg/sqm with non woven polyster fibre as reinforcement over a coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm by torch application with side over laps & longitudinal joints over laps etc as per manufacturer instructions for sunken treatment of WC/Bath complete.

M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete.

M&L for 25 mm thick cement concrete in flooring type B0, 1:2:4 (12.5mm graded aggregate) with water proofing compound @3% by weight of cement for laying floor tiles for sunken treatment of WC/Bath complete. Note (WPC will be measured and paid separately).

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete.

Removing building materials etc. to a distance exc 1km and not exc 5km, including loading, unloading and stacking at the destination complete.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings and M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in & including medium grade PVC conduit 25mm dia & accessories concealed, including cutting chases, finising of slote by means of cement mortar to the existing surface of the wall & touching with the existing colour of wall and making good disturbed surface, sunk in pressed steel terminal boxes of required size not less than 1.2mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet & fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit for One light/fan/bell point controlled by one switch 6 amp one way complete.

All as described in Item No 125 above but for One 3 pin switch socket combination 6 amp on the independent board.

All as described in Item No 125 above but for One 3 pin switch socket combination on same board with other switches.

All as described in Item No 125 above but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

All as described in Item No 125 above but for One light point controlled by two 2 - way switches, with cables 1.5 sq. mm size ®

S&F in replacement MCB DB SPN 8 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete

S&F in replacement MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete

S&F in replacement MCBs SPN 6 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete

S&F in replacement MCBs SP 6 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete

S&F in replacement MCB TPN, 63 Amps 4-Pole, 415 volts, breaking capacity10 KA complete

M&L switch piano flush type single pole, one way 6amp complete .

M&L switch piano flush type single pole, two way 6amp complete .

M&L switch socket combination 5 pin 6 amp complete.

M&L switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type complete.

S&F fan regulator electronic type similar to code No 38660 of Anchor complete

S&F ceiling rose 65x17mm three terminals complete .

S&F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting with 9watt LED bulb complete

M&L switch flush type bell push button 6 amp complete.

M&L Electronic ding dong bell AC 230V single pole complete

M&L in replacement Sub main wiring with two single core PVC insulated and unsheathed FR multi stranded copper conductor cable 1100 volt grade IS-694,marked of 6.0 sqmm size drawn through and including 20mm dia PVC conduit medium grade ISI marked and conduit junction boxes,terminal boxes and accessories such as tees, bends, elbows, reducers,bell mouth tube ends fixed to the surface of wall / ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FR multi stranded copper conductor cable for earth wire continuity conductor complete. NOTE : Two runs of single core cable 6.0 sqmm respectively and one run of 6.0 sqmm copper FR cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

Supply, Fixing, Testing and commissioning in replacement of 4' LED not less than 1X18W LED Batten with LED tube not less than 18 watt and Similar to Batten cat Part No. REGALBATTEN8UPTO1X22wSSBSWH and LED tube light cat part No. CRYSTAL1213T8DSTL18WLED865SGLASS of Havells complete

M&L in replacement earthing with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 5 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipw,15mm dia,medium grade,7.5 mtr long for protection of earth lead upto test point etc complete.

Supply, Fixing, Testing & Commsioning in replacement of IP65 integral LED Bulk Head luminaire. Power Consumption should not exceed 10W (Including Driver Loss) and Similar to cat Part No. RUGBYNEONFT10WLED760SSYMBOPC of Havells complete.

Supply, Fixing, Testing & Commisioning of 2' not less than 10W Mirror LED Batten .Mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete all as specified & directed. Make- Havells, Model-ENDURALINEARNEOBS10W LED 830SPCWH or equivalent in Wipro/Philips/CG

S&F wall security light LED type not less than 20W & The Luminaire connecting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose with GI pipe suitable bend 1.2 mtr long and fixing on wall/pole with clamp, nut & bolt and similar to Havells, Model-ENDURACITYLITEPLATSL20W LED 757SASYBOPC complete

S&F ceiling fan 1200 mm sweep BEE 5 star rated including fixing of down rod and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office

S&F AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 1P LCD Meter 5-30A with Optical port + BOX and Similar to Model EM101+ Class 1 Base mounting and cat part No.WM101BC5DDHBOX of L&T complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office

M&L in replacement Rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for LAN and TV SocketNote: Old UNSV ceiling fans will be deposited to AGE E/M office

M&L in replacement PVC Junction boxes (1 to 4 way) complete

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil complete.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cm in soil complete

M&L for sand cushoning, to cable with river sand and punning to provide required cover for UG cables complete.

M&L brick protection cover to electric cable with class 'B' bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm complete.

Supply and laying or fixing or passing through pipe in repairs XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 sq. mm 3.5 Core complete.

M&L in replacement galvanized steel tubing light Grade of 40 mm dia protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete.

CENTAUR ENGINEERS