Provn of Boundary wall for BRTF at village Badli near Jodhpur

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out in hard rock by use of pneumatic concrete breakers, chisels, wedges etc in lieu of blasting complete all as specified & directed.

Supply approved soil brought from outside MD land incl spreading, levelling, well ramming and watering complete

M&L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and directd.

M&L for squared rubble stone walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

Extra over stone masonary for hammer dressing to facestones with maximum depression on face from a straight edge held against the dressed surfaces not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, regular coursed complete all as specified.

External angles (for quoins and jambs) in facing for walling of squared rubble, Jodhpur type, regular coursed complete all as specified and directed.

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM 1:4 complete all as specified.

M&L for rendering 15mm thick in CM(1:6) stone walling including finshing the surfaces even & smooth without using extra cement complete all as specified and directed

M&L for rendering 10mm thick in CM(1:4) on brick work including finshing the surfaces even & smooth without using extra cement complete all as specified and directed

M&L for rough cast plaster 20mm thick in CM(1:4) on brick work complete all as specified and directed

M&L for broken glass coping in CM(1:3) complete all as specified and directed

MS work as in post and struts in fencing including cutting top to shape as directed railing holes notching for wire etc and similar work conforming to Fe-410-0 or Fe -310-0 complete all a specified and directed

M&L for preparation new steel surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation new plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.

M&L for ornamental steel gate 7.0 metre wide and 2.95m high in double leaf including pillars in RCC M-25 design mix using 20mm graded stone aggregate, excavation and earth work any in soft/disintregated rock, form work, reinforcement steel, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified, shown on Drg No CEJZ/WD/50/2015 Sht 4/5 & directed.

M&L for steel gate 5.5 metre wide and 1.25m high in double leaf including pillars in brick/stone masonary, excavation and earth work in hard rock, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified, shown on Drg No CEJZ/TD/06 Sht 1/2.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standards rails straining bolts incl. securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed block including weathering, slightly rounded or chamfered angles and throating also including necessary shuttering as directed.

S&F on security wall stainless steel concertina coil of diameter as approved by GE complete including binding & jointing the ends.

BABU LAL PARIHAR

m/s nemichand contractor

Pioneer Enterprises

ABHOG INFRASTRUCTURE PRIVATE LIMITED

Jagdish Prashad and Company

KHETA RAM RAGHUNATH RAM CONST CO PVT LTD

Jeet Construction