Renovation and EI works for Sewing Technology Workshop and Power DB for Submersible Pump of Mandirbazar ITI running under PTP under Nodal ITI Tollygunge in the District of South 24 Parganas.

Amount

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. i) 160A Bus, 12 Way VTPNDB. ii) I/C - 415V, 100A, 25kA/35kA FP MCCB (adjustable thermal and fixed magnetic setting) -1no. iii) O/G - 415V, 10/16A, 10kA TP MCB ('C' Curve) -8 nos. & 415V, 32A, 10kA TP MCB ('C' Curve) - 4 nos. (Make - Legrand/Schneider/ABB)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand ) i) 6 Way ii) I/C- 415V, 40A FP Isolator-1no iii) O/G - 240V, 16A SP MCB ('C' Curve) - 18 nos (Make - Legrand/Schneider/ABB)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Average run 8 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish as per GS. On Board

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 × 36/0.3 (2.5 sqmm) + 1 × 22/0.3 (1.5 sqmm) ECC) [For 15A Socket]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

4 × 56/0.3 (4 sqmm) + 2 × 36/0.3 (2.5 sqmm) ECC [For Industrial Socket]

4 × 84/0.3 (10 sqmm) + 2 × 56/0.3 (6 sqmm) ECC [For HTPN DB]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing 240 V, 3nos. 20A plug socket with separate 3nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS(16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 10/16 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (Make - Legrand/Schneider/ABB)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supply of 3 Core 4 Sqmm XLPE Insulated & armoured Copper cables for Working Voltage up to 1100 Volts of following sizes [Make - Havels / KEI / Polycab / Gloster] [From Industrial Socket to M/C]

Supply of 4 Core 16 Sqmm XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make - Havels / KEI / Polycab / Gloster] [For Fider Pilar Box]

Supply of 4 Core 35 Sqmm XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make - Havels / KEI / Polycab / Gloster] [For VTPN DB]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable after cutting Bitumious Road & mending good damages for the following Sizes. upto 95 Sq. mm

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supplying and fixing compression type gland for the following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS.

4 Core 16 Sqmm

4 Core 35 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing material

4 Core 16 Sqmm

4 Core 35 Sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc.,including supplying,sockets,tapes 4 Sqmm

Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings as per GS

Dismentaling, Repairing and Re-installation on New base of existing outdoor compartmentalized double door type MS mini Pillar Box after cutting the existing contrete base and complete with car venture type base pedestal for holding the upper compartment of the Pillar Box. The overall dimension of the above Pillar Box 860H x 760W x 560B mm, made from 4mm thick MS sheet with single door for free opening. The above door fitted with side of the Pillar Box by single set hinge system arrangement with providing capsule hinge welded with the Pillar Box rigidly incl. providing door handle and providing Vent at the top side of the Pillar Box incl. padlock system on the above Pillar Box for extra protection incl. S&F 7 (seven) lever (Godrej) padlock with duplicate key in front side. There should be provision inside the Pillar Box of 1 no. suitable size of Hylamp sheet holding the electrical accessories with suitable size of angle iron frame fitted inside the middle portion of the above Pillar Box and S&F of following accessories.

(Make - ABB/L&T/Siemens/Legrand) Incomer : 415V TPN with fuse on L&N, 63A Mainswitch - 01 no. Bus-Bar : Cu 4 bars 415 V, 63 A. Out Going : i. 415V, 16A, TP MCB (C-curve, 10kA) - 3 no. ii. 230V, 16A DP MCB - 03 no. Auxullary : i) 8''x6'' Danger Board. ii) 3 color Indicator Lamp All necy internal connection done by suitable Cu wire and MCB, Main Switch fitting arrangement should be provide.

Note: 1) All the above rates should be quoted inclusive of all taxes & duties, District charges, Riverine charges and LWC as applicable, with cost of maintenance, servicing, supply & replacement of spares for 1 (one) years from the date of commissioning. 2) The Agency must procure the materials from the manufacture/OEM or their authorised sales Channel so that the standard warranty/support of the manufacturerer/OEM becomes applicable to the product to be delivered and installed by them. Documents that authenticate such procurement from the manufacturer/OEM or from their authorised sales Channel and standard warranty/support should be sent from the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill. If any refubrished materials are supplied and installed, penal action will be taken as per existing rule. Before execution of the work the prospective bider has to submit layout drawing as per design of OEM dully approved by the OEM. 3) Total is rounded off to the nearest rupees.

G.G. PROJECT (BID ID -5896010)

M/S PRITAM ELECTRICALS AND ELECTRONICS (BID ID -5896451)