SPECIAL REPAIR TO BLDG NO. P-3 SINGLE JCO LIVING ACCN AND BLDG NO. BK-21 AND 15A COOK HOUSE OF CAMP AREA 23/1 AT 2 PARA (SF) BN AT CLEMENT TOWN, DEHRADUN

Amount

Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws incl making good of surface of walls with brick work & necessary finish complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tiles n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tiles n.exc 0.36 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) to recieve tiles complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm (400x400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

M&L for glazed ceramic colour joint free tiles tiles in verticle surface 350x250x7/300x450x7mm thick set and jointed in neat cement slurry over 10 mm thick (1:4) cement mortar plaster and pointed in coloured cement to match complete all as specified and directed.

M&L for machine cut Kota stone slab 16-18 mm thick as in floor laid over and including 15mm thick screed in CM (1:6), set and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing complete all as specified and directed.

M&L for machine cut Kota stone slab 10-12 mm thick as in skirting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls complete all as specified and directed.

M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L pre-polished Baroda green marble 12-14 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking platforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe (where directed) over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of semi- perforated 12mm thick micro tegular edged false ceiling tiles Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in truehorizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqmincluding both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threadedhanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed.

M&L for hard core of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface of broken stone/ boulders complete all as specified and directed. .

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of internal acrylic distemper including a coat of primer of approved tint over a coat of wall care putty complete all as specified and directed.

M&L for applying two coat of internal acrylic distemper of approved tint over a coat of wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying with three coat of white wash over wall surfaces complete all as specified and directed.

M & L for complete removal of old/existing treatment including preparation of wall sufaces of any description and applying two coats of white washing on wall surfaces complete all as specified and directed..

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of acrylic exterior emulsion paint (Apex) over a coat of primer incl over a coat of wall care putty after preparation of newly plastered/concrete surfaces on wall complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex) after complete removal of existing treatment including preparation of old plastered/concrete surfaces over a coat of wall care putty on wall complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed.

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M& L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and including fixing of screws complete all as specified and directed.

M& L Solid (125mm X 63 mm Double rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

M& L 30 MM thick moulded plain WPC solid door shutter: Providing (30mm thick) MOLDED WPC Brown factory made 100 % solid door (Confoming As per IS :4020) Made from 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600Kg/Cum. manufactured by an ISO:9001-2005 certified company. The door should be water proof, termite proof, fire retardant and including fixing of screws complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed.

S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed.

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and directed.

M&L for preperation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed.

S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame at 110mm c/c (Horizontal bars) with screws, 4 mm thick sheet glass, 0.36mm stainless steel wire cloth i.e. 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing

S&F in repair double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed. Make :- Vectus/Sintex/RC Plasto/Prayag.

S&F in repair double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed. Make :- Vectus/Sintex/RC Plasto/Prayag.

S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled complete all as specified and directed.

S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed.

S&F 150mm size stainless steel handles complete all as specified and directed.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F mild steel 160mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and directed.

M&L 100mm dia PVC pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 100mm bore PVC bends or diminishing pieces, Single Tee/Double Tee complete all as specified and directed.

M&L 75mm dia PVC pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed.

S&F PVC floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) and SS gratings complete all as specified and directed.

S&F 75mm bore PVC bends or diminishing pieces, single Tee/ Double Tee complete all as specified and directed.

S&F PVC cowls 75mm complete all as specified and directed.

S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including PVC 'P' or 'S' trap and provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repair vitreous china WHB size 505 x 410 x 185 mm with pedestal white with flat back including CP waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated pillar tap with fly nut with long swan neck screwed for 15mm bore dia of pipe complete all as specified and directed.

S&F in repair 15mm Stop valve/angle cock fancy type, chromium plated high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified and directed.

S&F as in repair concealed stop valve, cast copper alloy, screwed down, high pressure with handle and long shank and cup, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed.

S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.

S&F 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.

S&F 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path & plinth protection and finish the top surfaces even and rough to receive top layer complete all as specified and directed.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block rubber finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement & pigment, 60 mm thick, of shape approved by GE over 15mm sand cushion complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, edging including necessary form work complete all as specified and directed.

M&L 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) laid in panels as in flooring including finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benchinge complete all as specified and directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Excavation in post hole (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in any type of soil complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (Using 20mm graded stone agrregate) as in foundation of posts, railing and similar work complete all as specified and directed.

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from tow or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F MS work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, steel wire fabric, MS sheet, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed

M&L clean sawn second class hardwood in scantling for purlin & rafter etc including dismantling of old timber scantlings 40sqcm and over complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description over 10 cm width /girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.

S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified and directed.

Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and directed.

Dismantling and taking down carefully DB's any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and directed.

Taking down carefully by unscrewing from ceiling roses, light fittings for reuse at site, carrying to the store (to be measured only when found serviceable in all respect for reuse) complete all as specified and directed.

Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including surface PVC conduit to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including metal finish cover plates with over moulded frame complete all as specified and directed. Note:- (i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates.

One 3pin, 5 Amps socket out let on same board with other switches , 01-way switch complete all as specified and directed.

One 3pin, 5 Amps socket out let on independent board controlled by one, 01-way switch complete all as specified and directed.

All as per item No 107 above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified and directed.

S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC complete all as specified and directed.

Supply and fixing switch modular , one-way 16Amps, 1 module 240 Volts AC complete all as specified and directed.

Supply and fixing bell push piano flush type single pole one way 6 Amps complete all as specified and directed.

Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz complete all as specified and directed.

Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz complete all as specified and directed.

Supply and fixing step socket type modular fan regulator 120/280 , 100 Watt complete all as specified and directed.

Supply and fixing ceiling rose 3 terminal/PVC/ Polycarbonate, isolated body complete all as specified and directed.

Supply and fixing batton/angle holder insulated bodywith back plate including 09 Watt LED Bulb complete all as specified and directed.

Supply and fixing bell ding dong AC 230/240 Volts single pole complete all as specified and directed.

Taking down ceiling fan from existing building again refixing the same ceiling fan connecting up including provision of cable flexible 3 core of suitable size wire from ceiling rose to connect fan for greasing and oiling etc complete all as specified and directed.

Fixing only Box type serviceable fittings, removed against item No. 106 after completion of B/R work complete all as specified and directed.

S& F wall mounted LED batten Box type fitting Blu colour end caps pre-wired LED fitting all as per cat part No DMLN 1 LT 8-16 with & including LED T8 tubular lamp complete all as specified and directed.

S& F in repair oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection all as per cat part No- LBHP-10-CDL of make Crompton / or equivalent make in philips / Havells/ C&S as approved by GE.

S& F Glaze Wall Light including 9/10 watt LED ( B22), 6500 K complete all as specified and directed.

Supply and fixing LED lights fittings mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED street light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size bracket for fixing complete all as specified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed .

Supply and fixing MCB SP 06 to 32 Amp 'B' series 10 KA repturing capacity complete all as specified and directed.

Supply and fixing MCB SPN 40 Amp, 240 V AC 10 KA repturing capacity complete all as specified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB TPN(Triple pole and neutral) 240V AC 4 way with 200 Amps rated busbar all as specified and directed .

Supply and fixing MCB TPN 63 Amps 240 V 10 KA repturing capacity complete all as specified and directed.

Supply and fixing electric water heater storage type ABS body with Glass lined inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve thermostate NRV connection piece including taking down old water heater storage type from existing building and deposit to MES store including complete all as specified and directed.

Supply and fixing exhaust fan AC single phase 230/240 Volt of size 450mm sweep, metallic body powder coated painted finish, power consumption-50 W, Air deplacement-1290 Cum/Hr, RPM-900 complete with louvers including making whole and grouting of nut bolts etc and making good the distrubed surface of wall complete including taking down old exhaust fan any type from existing building and deposit to MES store including complete all as specified and directed.

Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface/ concealed in wall as per existing along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI Wire 4 mm as earthing lead with nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC (1:2:4) type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC (1:2:4) type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

IRFANAHMAD CONTRACTOR

Nanda Brothers

SWASTIKA BUILDERS

RADHA ENTERPRISES