Zone VI One year Running Contract for various PWD Roads under Road Section Kuruvilangadu in Kottayam district. 11 road stretches for a length of 26.175 km

Amount

Appendix A -Reactive Maintainance (Intial Rectification Work)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

OD266452/2023-2024:##l Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD266453/2023-2024:MORD - Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) OR 13.2mm to 0.9 mm (Type - B) aggregates using penetration grade bitumen using VG 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheeled roller 8-10 KN static roller and finishing to required level and grade as per Technical specification clause 509 of MORD - Bitumen @22 kg / 10 m2....

OD266455/2023-2024:Providining and fixing of DLP board for Running contruct workwith Non-retro-reflectorised vinyl sign with 1 years warranty manufactured vinyl painted sheetingfixed over aluminum sheeting 2mm thick aluminium composite materialsheeting 4mm thick with area not exceeding 0.9sqm with suitableback supporting frame of MS angle 40x40x6 and supported on GI pipepole 50mmNB confirming to IS 1239 Firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete min size 45x45x60cm, 60cmbelow ground level including painting all exposed surface with 2 coat of epoxy panting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc

OD73724/2024-2025:Providing and fixing of vinyl printed sticker over existing running contract information board non-retro-reflectorized Vinyl sign with 1 year warranty manufactured Vinyl Printed sheet including lettering symbols etc

Appendix -B Pre Mansoon Wotks

OD266463/2023-2024:Engaging Man Mazdoor for clearing Drain and culvert

OD57010/2024-2025:Engaging wood cutter with machine for cutting of trees , including cutting of trunks, branches and removal of stumps, roots, etc

OD56125/2024-2025:Engaging hydraulic excavator

OD56966/2024-2025:Hire and running charges of tipper

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> PCC Grade M20 (Without formwork) <br>

12.8.B.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> PCC Grade M20<br>

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

2.3.2.B:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness <br> In area of thorny jungle - By Mechanical Means<br>

Appendix-C Proactive/Preventive Maintainance

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

OD266459/2023-2024:##l Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD266460/2023-2024:MORD - Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) OR 13.2mm to 0.9 mm (Type - B) aggregates using penetration grade bitumen using VG 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheeled roller 8-10 KN static roller and finishing to required level and grade as per Technical specification clause 509 of MORD - Bitumen @22 kg / 10 m2....

OD266461/2023-2024:Filling up potholes with bituminous ready mix compound(25kg bag) and compacting by ramming to get a compact surface including of cost of materials, laying charges,transportation to site etc. complete.Rate is arrived for a bag of 25kg

OD266462/2023-2024:Engaging labour with passenger car not less than1000 cc for Conducting and reporting routine inspection up to 20Km per day for the entire length of project road at a frequency of 7 days throughout the agreeement period of running contract as directed by the departmental officers.

Appendix-DEmergency Works

OD266456/2023-2024: Engaging Man Mazdoor for clearing Drain and culvert

OD57015/2024-2025:Engaging wood cutter with machine for cutting of trees , including cutting of trunks, branches and removal of stumps, roots, etc

OD56155/2024-2025:Engaging hydraulic excavator

OD57016/2024-2025:Hire and running charges of tipper

55.10.2:Providing and erecting retro-reflectorised Object Hazard Marker 450mm x 900mm <br>Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801. <br>450mm x 900 mm

8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3<br> Road Markers/Road Stud with Lense Reflector :-

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

JAMES JACOB (BID ID -1969204)

V T MATHEW (BID ID -1974768)

SHAJI PAILYE (BID ID -1976812)

Bidder Name

BABU JOSEPH

SHAJI PAILYE

V T MATHEW

JAMES JACOB