QC Lab Civil Renovation works

Amount

Precast RCC Slab for drain

od68316/2024_2025 : Providing and laying in position specified grade of reinforced cement concrete for precast slab and lifting, conveying and fixing the newly casted RCC slab in position including all labour charges and miscellaneous expenses etc complete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:<br>1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size. Required cement supplied by kmml

Dismantiling of brick work

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Excavation for drainage

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

od68317/2024_2025 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:<br>1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Wire cut brick masonry

od68320/2024_2025 : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:<br>Cement mortar 1:6 (1 cement : 6 coarse sand)(from floor 2 level up to floor 5 level). The required cement shall be supplied by the company.

Plastering

od68321/2024_2025 : Plastering with 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) for compound wall including groove cut, cornice works etc. as per drawing and instructions of Engineer in charge. (The required cement shall be supplied by KMML at our store)

Shuttering for precast slab

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

Dismantiling of floor and wall tile

15.23.2 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

Granite work

od68324/2024_2025 : Providing and laying Polished Granite 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with granite fillers of matching shade including rubbing, curing, polishing,edge moulding/nosing etc. all complete as specified and as directed by the Engineer-in-Charge.Cement shall be supplied by the company

Laboratory sink

od68325/2024_2025 : Providing and fixing white vitreous china laboratory sink (white) Size 600x450x200 mm with C.I brackets, C.P brass waste coupling, including extending waterline point and waste with PVC pipe 20mm(12kg/cm2) size concealed and 50mm(10kg/cm2) with all fittings upto a length of 1 m from the existing point, painting of fittings and brackets, cutting and making good the wall wherever required, as per the direction of Engineer-in-charge.

Laboratory Sink Tap

od68328/2024_2025 : Providing and fixing CP brass long nose laboratory sink cock with nozzle of approved quality conforming to IS standards and weighing not less than 690 gms.<br>20mm or nearby nominal bore

GI Work for sink stand

od68329/2024_2025 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved epoxy primer and 2 or more coats of epoxy paint, including welding and bolted with special shaped washers etc. complete

Dismantiling of cupboard doors

15.39.2 : Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Thickness above 10mm upto 25 mm

Aluminium frame works

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

Aluminium shutters for doors

od95099/2024_2025 : Providing and fixing aluminium work for Cupboard doors with extruded built up standard tubular sections/ appropriate Z sections/handle profile sections and other sections of approved make , fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight and electroplated in champagne gold/silver finish wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):<br>For fixed portion<br>Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

UV Sheet paneling

od95121/2024_2025 : Providing and fixing 4 mm thick UV sheet in panelling fixed in aluminum doors,<br>windows shutters and partition frames with C.P. brass / stainless steel screws , UV Sheet finished in two diffrent colours and complete as per<br>architectural drawings and directions of Engineer - in- Charge

RCC Lintel beam

od95236/2024_2025 : Reinforced cement concrete work in beams, slabs, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).Cement and TMT bars supplied by KMML

shuttering for lintel

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

reinforcement steel work

od95430/2024_2025 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete .Thermo - Mechanically Treated bars of grade Fe-500D or more (TMT steel bars shall be supplied by company)

window dismantiling

15.13.1 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below

PCC Demolishing

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

ceramic floor tile

od95431/2024_2025 : Providing and fixing premium quality ceramic digital anti-skid floor tiles of make<br>Kajaria-Alexis Decor/Nitco/Simpolo/Cera or approved brand conforming to IS : 15622 (thickness to be<br>specified by the manufacturer), in all colours, shades of size matching to wall tiles or as approved by<br>Engineer -in-Charge, over 12 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) with tile spacers<br>and jointing with epoxy joint fillers with pigment of matching shade of approved brand in approved pattern<br>with two or more desgin tiles complete. (The required OPC Cement shall be supplied by KMML at our store)<br>Details of cost for 1 sqm<br>MATERIAL:<br>Glazed Ceramic floor tiles 300x300 mm size = 1.00 sqm<br>Add for wastage & breakage @ 2.5 % =0.025 sqm<br>Total = 1.025 sqm

Ceramic wall tile

od95432/2024_2025 : Providing and fixing premium quality ceramic digital wall tiles of approved brands like<br>Kajaria- Alexis Decor/Nitco/Simpolo conforming to IS : 15622 (thickness to be specified by the<br>manufacturer), in all colours, shades of size 30x60 cms or nearest as approved by Engineer -in-Charge with cement based high polymer modified quick-set tile adhesive ( Water based) conforming to IS : 15477, in average 3 mm thickness.<br>Details of cost for 1 sqm<br>MATERIAL:<br>Ceramic Glazed tiles = 1.00 sqm<br>Add for wastage & breakage @ 2.5 %<br>0.025 sqm<br>Total = 1.025 sqm<br>

wall primer

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Wall painting

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

PVC Door

od95438/2024_2025 : Providing and fixing single molded fiber door with frame and all fittings like latch, tower bolt, hinges etc. maximum size up to 2 sqm for toilet doors.

PVC Pipe 25mm concealed

50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

Pvc Pipe 50mm Concealed

50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

Pvc Pipe 63mm Concealed

50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

Pvc Pipe 32mm exposed on wall

50.18.9.14.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall

Pvc Pipe 50mm exposed on wall

50.18.9.16.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall

Pvc Pipe 50mm trenching and refilling

50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2

Pvc Pipe 63mm Trenching and Refilling

50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

Pvc Pipe 110mm trenching and Refilling

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

Pvc Fitting -63 Dia elbow

50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

Pvc fitting 63mm dia 45degree elbow

50.18.9.20.2 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow

63mm dia door elbow

50.18.9.20.3 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow

63mm dia tee

50.18.9.20.5 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

63mm dia Bend

50.18.9.20.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

63mm dia door tee

50.18.9.20.6 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee

63mm dia vent cowl

50.18.9.20.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

110-63mm reducer

od95407/2024_2025 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110x63 mm dia Reducer

63-50mm reducer

50.18.9.20.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer

63mm dia socket/coupling

50.18.9.20.9 : Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63 mm dia Socket /coupling

110mm dia elbow

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

110 mm dia 45 degree elbow

50.18.9.22.2 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

110mm dia door elbow

50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

110mm dia bend

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

110mm dia tee

50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

110mm dia door tee

50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

110 dia socket/coupling

50.18.9.22.11 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling

C.P brass bib cock long body

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

C.P brass stop cock

18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

C.P Brass angle valves

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Pvc Ball valves

od95418/2024_2025 : Providing and fixing PVC ball valve (ISI marked) of approved brand for Rigid PVC pipes, including jointing with PVC solvent cement:<br>25mm nominal bore.

C.P Brass shower rose

od95419/2024_2025 : Providing and fixing C.P. brass shower rose with arm of 15 or 20 mm inlet:<br>100 mm diameter

SS Soap Dish

50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

C.P towel rod

od95423/2024_2025 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Health Faucet

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

C P Grating

od95427/2024_2025 : Providing and fixing CP grating of approved quality.<br>Rectangular type with openable circular lid<br>150 mm nominal size square 100 mm diameter of the inner hinged round grating

Pvc Floor Trap

od95428/2024_2025 : Providing and fixing PVC moulded Floor trap for sanitary pipelines, including jointing PVC pipes with PVC solvent cement and filling gaps with cement grout- Floor trap 4 way/3 way

European Type water closet

17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

wash basin

17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brass pillar taps

Mirror

17.32.2 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

Indian Type water closet

17.1.2 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:Stainless Steel AISI-304 (18/8) orissa pattern W.C. pan of size 585x 480 with flush pipe and integrated type foot rests

Manhole

od95429/2024_2025 : Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for valve with CI cover with frame or reinforced cement concrete cover slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3<br>(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:<br>With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Hinges for cupboards and wall shelf doors

od95470/2024_2025 : Providing and fixing ss self closing hinge of approved quality with stainless steel screws complete :

Glass for wall shelf And vetilations

od95469/2024_2025 : Providing and fixing hitched glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):<br>With float glass panes of 4.0 mm thickness and hitched as per the directions of engineer in charge.

Labour

od99331/2024_2025 : Unskilled Labour charges

Bidder Name

PRAJITH. P