ADDN/ ALTN/ IMP TO CERTAIN SMQS AT SECTOR 31 AND 47 AT 3 BRD AF UNDER GE (AF) MC CHANDIGARH

Amount

Demolition of lime concrete / lean concrete /Brick bats etc. from sunken slab portion exc. 15 cm thick but above ground floors, complete all as specified and directed by Engr-in-Charge including removal of demolished material from MD land debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete complete all as specified and directed by Engr-in-charge.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates as in flooring laid in slope complete all as specified and directed by Engineer- in-charge.

M&L lean concrete type E-2 (1:5:10) using 40mm graded crushed stone aggregate as in sunken portion complete all as specified and directed by Engineer-in-charge.

M & L for 40mm GI Spout pipe for sunken work complete all as specified and directed by Engineer-in-charge.

M&L for providing water proofing tratment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make asapproval in Technical Instruction 5/2003 by adding : (a) 15mm thick plaster (1:4) cement sand mortar with integral water proofing compound 2% by weight of cement on floor and wall / beam , finishing the surface even and smooth without using extra cement. The surface shall then be cured and allwed to dry. (Note: Water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @0.5 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.25 kg/sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @0.25 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.15 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs complete all as specified and directed by Engineer-in-charge. NOTE : Floor area of the sunken slab shall be measured only. Make of Acrylic based polymer modified cementitious compound - Fosroc ( Brushbond) /Sika (Sikatop-100)/Pidilite/Dr Fixit

Supply only water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge.

S&F in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, complete all as specified and directed by Engr-in-charge.

All as per item No. 07 here-in-before but 75 mm dia.

Fixing only in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, after necessary cleaning complete all as specified and directed by Engr-in-charge.

Fixing only in repair 75 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall, laid in trenches or in floors, after necessary cleaning complete all as specified and directed by Engr-in-charge.

S&F 100 mm cast iron bends complete all as specified.

All as per item No. 11 here-in-before but 75 mm dia.

S & F Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia complete all as specified and directed by Engr-in-charge.

S & F Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75 mm dia complete all as specified and directed by Engr-in-charge.

S&F cast iron cowls 100 mm dia as in repairs complete all as specified.

S&F cast iron cowls 75mm dia as in repairs complete all as specified.

S&F in repairs 75 mm dia cast iron Floor Trap/Nahani Trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified.

S&F in repairs 100 mm dia cast iron Floor Trap/Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)complete all as specified.

Fixing only in repair 100 mm cast iron bends/Tee/cowls after necessary cleaning complete.

All as per item No. 19 here-in-before but 75 mm dia after necessary cleaning complete.

Taking up or down GI steel/ Kitek tubing 15 mm with connections or fittings from wall, ceiling, floor etc

Taking up or down GI steel/ Kitek tubing 20 mm with connections or fittings from wall, ceiling, floor etc

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified.

M&L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar having superficial area not exceeding 150 Sqcm each making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1.

S&F in repair PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls, laid in trenches, floors.etc complete all as specified and directed by Engr-in-charge.

S&F in repair for 110mm PVC (SWR) T equal and unequal.

S&F in repair for 110mm PVC (SWR) bends any radius.

Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc , complete all as specified and directed by Engr-in-Charge.

M&L Rendering 15mm thick in cement mortar (1:6), on brick surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, parapet, chajjas, facias of building and finished the surface even and smooth without using extra cement, down complete all as specified and directed by Engineer-In-Charge. .

M&L preparation of old/new plaster surfaces and applying two coat of oil bound distemper white or tinted complete over 1-2mm thk wall care putty complete, all as specified and directed by Engr-in-Charge.

M&L prepration of new surface of ceiling and applying three coat of white wash complete all as specifeid and directed by Engr-in-Charge.

M&L for , Glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, 10 mm thick for wall finished in CM 1:4 , including dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) removal of rubbish off the premises debris away from site to a designated point by local administration or a distance up to 1.5 km from site complete complete all as specified and directed by Engr-in-charge.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in CM 1:6 and dismantling of existing tiles and rubbish off the premises away from site to a designated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge.

Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in cement mortar 1:6 and dismantling of existing tiles and rubbish off the premises away from site to a designated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge.

M&L machine cut pre polished Kota stone slab 18-20 mm thick (single slab) laid in step/ floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in grey cement slurry to match the shade of slab ,cutting groves in stone ,making nosing at edge and chipping of floor surface complete all as specified and directed by Eng-in-Charge.

M&L machine cut pre polished kota stone slab 18-20mm thick (single slab) in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed in CM 1:4 with neat cement slurry @ 3.00 kg/Square including pointing in grey cement slurry to match the shade of slab,chipping of wall surface etc complete all as specified and directed by Eng-in-Charge.

Material and labour for 18-20mm mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed.

All as per Srl item no 40 here-in-before but as in window cill

M&L for granite stone 16-18mm thick as in door chowkhat cut to shape making rebates 200mm wide for double rebate chowkhat and 150mm wide for single rebate chowkhat fixed over rendering 10mm thick in CM(1:4) on walls/lintel surfaces complete along with three hinges for single & six hinges for double door 150mm hinges (hinges will be paid separately).

S&F in repairs vitreous china wash down water closet pan (pedestal pattern ) including CI 'S' Trap including connection to drain and flushing pipe antisyphonic pipes etc complete all as specified

S&F in repairs Plastic water closed seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified

S&F health faucet brass chromium plated with hook stand Roman 2 In 1 Faucet 1.5 mtr length complete all as directed by Engr-in -Charge.

S&F PVC syphonic action type flushing cistern 10 lts capacity ,low level with inlet ,ball valve float and bracket with complete fitting complete all as specified and directed .

S&F in repairs 15 mm brass chromium plated wall Mixer for Hot and Cold water screwed down for iron pipes for complete all as specified and directed.

S&F in repairs 15 mm brass chromium plated centre hole WHB mixer for mixing Hot and Cold water screwed down for iron pipes

S&F in repairs 15 mm brass chromium plated Sink mixer for mixing Hot and Cold water screwed down for iron pipes

S&F 15 mm fancy type angle valves cast copper alloy screwed down high pressure with crutch both ends for iron pipes or for union and fixed

S&F 15 mm Bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair

S&F in repairs Vitreous china wash hand basin ,flat back size 550 mm X 400 mm including Bracket cutting in wall and pinning in ends of bracket or erecting stand with PCC 1:2:4 Type B1 , including waste coupling and waste pipes

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mml fixed in repairs complete.

S&F in repairs Stainless steel plate rack (utensil rack) of size 900 mm x 900 mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screwes including necessary fittings ,nut/ bolts

S&F PVC connection 15 mm size with PTMT nuts of lengh 450 mm long

S&F in repairs Chromium plated shower roses swivel shower brass chromium plated with arm 150 mm size for fixing with 15 mm pipes with swivel joints ,any size including fixing to steel pipes or union

S & F PVC Bath Room cabinet (size- 300x450mm) with looking mirror & shelves fixed in repair complete all as specified and directed by Engr-in-charge.Make - Saint Gobain/ATUL/ Prayag

S&F Grating doom 125 mm dia with or without waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs complete. (Minimum weight 40 gms) complete all as specified and directed by Engr-in-charge.

S&F PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB fixed in repairs complete all as specified and directed by Engr-in-charge.

All as per Item 59 here-in-before but 40mm dia for sink.

S&F Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed in repairs complete all as specified and directed by Engr-in-charge.

All as per item no 61 here-in-before but 40mm dia (minimum weight 60 gms) for Steel Sink .

S & F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with threaded closed top), HDPE, triple layered white colour with ISI marked of 500 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, 20 mm bore screwed both end for iron pipe , and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

M&L for disconnecting of PVC tank of capacity 500 Ltrs & upto 1000 Ltrs for tank cleaning all as specified and directed :- a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour. b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank d) Refixing the tank in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as directed by engr-in-charge. Note : - Water proofing treatment, PCC bench, pipes if required to be replaced shall be measured and paid separately under relavent items.

S&F in repairs Ball valves high pressure PTMT ISI marked, with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe of 20mm bore (minimum weight 210gm) fixed in repair complete all as specified and directed by Engr in Charge.

Demolition of RCC of roofs, floors (other than ground floors), beams staircases, landing, slabs, chajjas, chimney and similar suspended work at any height complete all as specified and directed by Engineer-in-Charge.

M & L for Formwork to chullah hoods, chajjas,facia, troughs and similar, items in cluding edges,including stagging and scafolding up to 10 mtr heights, complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajjas, facia etc shelves and the like, at any height, complete all as specified and directed by Engr in Charge.

Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr in Charge.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr in Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed by Engineer-in-Charge..

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.00 sqm each

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc. 1.5 Sqm each

Cutting holes through brick wall built in cement mortar, for inserting holdfasts, depth of embedded portion of holdfasts exceeding half brick thick but not exceeding one brick thick and making good the dismantled portion with PCC type B-0, (1:2:4) and cement mortar (1:3) to match the disturbed surface with existing finish, complete all as specified & directed by Engr-in-charge.

M&L Factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L Factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L Factory made single extruded WPC (wood polymer composite) solid plain flush shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L Factory made single extruded WPC (wood polymer composite) solid plain flush shutter of 35 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made uPVC white colour sliding window three track area not exceeding 2.00sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm),sliding sash (42mm x 67mm). sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories)

Providing and fixing factory made uPVC white colour sliding window three track area exceeding 2.00sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm),sliding sash (42mm x 67mm). sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories)

S&F in repairs 18/19 mm thick Block board grade II quality interior grade commercial type with decorative face including fixing 18 mm wide 6 mm thick beading all around of 1st class HW (Teak) including touch wood paint two cats complete all as specified & directed by Engr-in-charge.

M&L 0.9 mm Decorative lamination type 1 of surface finish ,coloured and pattern as approval fixed with approval adhesive as per manufacture instruction all as specified and directed .

S&F 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed omplete all as specified.

S&F Mild steel pressed handles, oval type, stove enameled black 125 mm size fixed complete all as specified and directed by Engr-in-charge.

S & F mild steel butt hinges medium weight, cold rolled 100 mm , complete all as specified.

S&F 125 mm size hasp and staple safety type aluminium anodized complete all as specified & directed by Engr-in-charge.

S&F in repairs 300 mm SS sliding door bolts, plate type stove enameled black, with bright, bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed by Engr-in-charge..

S&F sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 Sqm in each pane, thickness in 5 mm complete all as specified & directed by Engr-in-charge.

S&F 5 mm thick Figured Glass pinhead , glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples and fixed with tinned tacks or galvanized wire staples complete all as specified & directed by Engr-in-charge.

S&F 300 mm mild steel ordinary rat tail rod pattern sorings, including roller & roller plate complete all as specified directed by Engr-in-charge.

S&F Floor door stopper of Aluminium alloy body anodised with hard drawn steel spring 140mm size fixed in floor complete all as specified directed by Engr-in-charge.

M&L for applying one coat of synthetic enamel paint over old steel and iron surfaces of any description, over 10 cm in width or girth including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for applying 2 coats of synthetic enamel paint over steel and iron surfaces of any description, over 10 cm in width or girth including preparation of new or previously treated surface over a coat of red oxide oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engr-in-charge.

S&F in repairs of Drapery rod/ curtain rod 25 mm diameter, stainless steel ( 304 grade) of thickness 20 gauge with standard type socket including brackets, side , doms, wall to wall , finel ,rings.

S&F Aluminium powder coated door seal strip with glass wool fixed with steel screws at bottom rail of external door complete all as specified directed by Engr-in-charge.

Cleaning of plants, bushes, peeple plants of building, if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical as directed by Engr-in-Charge and removing of unserviceable material out side MD land and cleaning site complete all as specified and directed by Engr-in-Charge.

Removal of Debris /demolished material out of MOD land upto 5KM from the starting point of collection all as specified and directed by Engineer-in-charge.

Taking down carefully of point wiring (Light , fan, socket or power complete fittings such as switches,Ceiling roses, pendants, regulator, sockets, Bell push) removing from site of work including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed NOTE :- Taking down of Light fitting, MCB, DB etc to be measured and paid separately.

Taking down carefully by submain wiring/service connection of any complete including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed all as specified & directed.

Taking down carefully DB box of any sizes & capacity including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLSH) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic UPVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases and modular flush GI metal boxes 0.8 mm thick ( Same as Switches Make) suitable for modular fittings including modular outer cover mirror/Glass finish plate with inner mounting frame of make Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea) /Goldmedal (Nexon Quorra) as per site requirement for mounting modular switches, sockets etc including earth wire of PVC insulated (FRLSH) copper conductor multistranded of 1.5 Sqmm size in green colour including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface )for One light/fan point controlled by one switch complete all as specified and directed in current SSR Part-I & II all as directed, as described below :-

All as per Srl item No. 104.00 here-in-before, but One 3-pin socket outlet 5 Amp on independent board.

All as per Srl item No. 104.00 here-in-before, but One 3 pin socket outlet 5 Amp on same board.

All as per Srl item No. 104.00 here-in-before, but One light point controlled by 2, two switches .

All as per Srl item No. 104.00 here-in-before, but One bell point controlled by one switch.

All as per Srl item No. 104.00 here-in-before but with 2.5 Sqmm copper conductor cable and 2.5 sqmm PVC insulated standard copper conductor complete FRLS cable as continuous earth wire all as specified for One 3 pin socket outlet 15 Amp on independent board.

Material and labour for Concealed Sub Main Wiring with two run single core 6 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 6 Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100 volts grade colour code cable for earth continuity including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed Note:- Two run of 6 Sqmm (phase+ Neutral) + One run of 6 Sqmm for earth wire + One run of UPVC conduit shall be measured as one RM. shall be measured as one RM.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular switch 16/20 Amp single pole one way,1 Module suitable for Mirror/Glass finish modular cover plate with indicator and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular bell push 6 Amps single pole , 1 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular socket shutter type, 2-in-1, 3 pins 6 Amps ,ISI marked, combined 2 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular socket shutter type, 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and fixing of MCB protected modular socket with Modular MCB 16 Amps built in MCB+ 16 Amps PRCD Top 30 mA + Socket 16 Amps with concealed metal sheet steel enclosure( same as per socket make ) with inner mounting frame and outer modular mirror/Glass finish cover for mounting complete including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint ) complete all as specified and directed . all as specified and directed. Make(Model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular ceiling rose surface bakelite Square in shape 100 mm x 100 mm, three terminals complete all as specified.Make- Goldmedal(Glassio) or equivalent in Anchor/cera

S&F Modular bell ding dong ,230V,2 Module ,Concealed in wall with concealed metal sheet steel enclosure ( same as per bell make ) with inner mounting frame and outer modular mirror/Glass finish cover for mounting including making good (i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed Make(Model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and fixing MCB double pole 40 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. Make: Havells/Legrand/ABB

Supply and fixing Arc Fault Detection Device (AFDD) with RCBO 32 Amp ,100 mA combined SPN MCB + AFDD+RCCB , offering protections for overload, short circuit, reidual current characteristices type A, over voltage protection above 270V AC +/- 5% & series, parallel arc fault, AFDD must be with dual test button for AFDD and earth leakage functions along with single diagnostic LED with blinking patterns for continious ON series arc parallel arc & over voltage protections Make Havells or equivalent complete all as specified & directed . Make: Havells/Legrand/ABB

Supply and fixing MCB Single pole 6 to 32 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. Make: Havells/Legrand/ABB

Supply and fixing MCB DB Single pole and neutral 12 way,concealed in wall, sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint with matching existing surface), complete all as specified and directed. Make : Legrand/ Schneider/ Havells/ Goldmedal.

Supply and fixing ceiling fan complete with aluminium blades, down rods suitable for Modular electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) all as specified and directed . Ceiling fan Make- Orient/Havells/Goldmedal

Supply & Fixing Modular fan Regulator electronic step type 100 watt, ISI marked, 2 Module,8 step suitable for Mirror/Glass finish modular cover plate complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nixon Quorra)

Supply and fixing wall mounted LED bracket light,9 watt ,aesthethically designed including retrofit B22 LED bulb 09 watt including making connection with flexible copper 3 core cable 0.5 Sqmm from connector/ ceiling rose to fitting complete all as specified and directed.

Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt Invertor LED Tube fitting with inbuilt battery back up ,polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts, lumen efficacy 100 lumen/watt,total lumens 2000,complete with three core twisted flexible copper cord cable of suitable size upto 1 mtr all as specified and directed..

Supply and fixing 02 feet 10 Watt invertor LED Batten with inbuilt battery backup ,lumen efficacy 100 lumen/watt,total lumen 1000, with extruded polycarbonate housing with high quality PC diffuser completewith two core twisted flexible copper conductor cable of suitable size upto 1 mtr all as specified and directed.

Supply and fixing Invertor LED Bulk head Luminaire ,10 Watt with motion sensor based dimming made of pressure die cast aluminium hosing with protcted diffuser ,colour temp 5000-6500K, PF >0.9 complete all as specified and directed.

Supply and Fixing Modular switch 20 Amp single pole one way,2 Module with indicator and water heater marking and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and fixing LED street light fitting 25 W powder coated, Solar all in one ,lumen efficacy 160 lumen/watt ,pressure die cast aluminium body and polycarbonate cover with individual LED lense having colour temperature, 6500 +/- 500, PF >0.90 with all accessories such as connection, nut and bolt etc, complete all as specified and directed.

Supply and fixing of water storage heater vertical (geyser) with inner Tank Material: Titanium Glass Lined coated Tank- 2X Corrosion Resistance; Outer Body Material: ABS/metal, Type: Storage ; Capacity: 25 Litres; AC 220-240 Volts, Wattage: 2000 Watts; with preset thermal cutout, Pressure: 8 Bars ; BEE Rating: 5 Star,Multifunction 4 in 1 safety valve ,glass coated heating element,adjustable temperature control knob,Magnesium anode rod,install on wall by anchor fastners complete with three core twisted flexible copper conductor cable of suitable size upto 2 metre all as specified and directed. Make : Gold Medal (Tizio)/ Havells (Velora)/ Jaguar (Elena)/ Bajaj (Reflecta)/ Crompton(Regera)

Supply and fixing MCB DB Single pole and neutral 4 way ,concealed in wall ,sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint with matching existing surface) complete all as specified and directed. Make : Legrand/ Schneider/ Havells/ Goldmedal.

Supply and fix Exhaust fan 250 mm sweep,810 CMH,37 W, non metallic type along with louvers at inner wall and front grill at the outer wall complete suitable to work on AC , single phase, 230 Volts, 1100 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm upto 1 metre including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint with matching existing surface), complete all as specified and directed .

M & L for Making square hole of size 260 mm x 260 mm sweep suitable for 250 mm sweep including making good disturbed surface (i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed .

Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal dust (100 kg) and common salt (300 kg) ,vegetable soil (300 kg), including GI wire 4 mm dia as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 15 mm dia light grade GI protection pipe upto 7.5 metre and watering pipe 20 mm dia light grade with funnel and wire mess including necessary earth work i.e Exacavation and removing upto 500 mtr distance , Precast (factory manufactured) RCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC with Precast RCC pit cover (Mortar design) 80 mm thick (yellow painted) with steel reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape etc including Mild steel Earth marker with earthing result ,date all as per plate no.3 of SSR 2009 Page No 497 and AIR HQ Policy No Air HQ/37529/9/1/ERA/W(P&C) dated 21 Nov 16 with dismantling old earthing, complete all as directed and specified. Note : The earth value/result must be less than 5 ohms.

Note:- Amount of credit of Rs. 35943.25 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

Havish Construction (BID ID -3390224)

B N FRIENDS AND CO (BID ID -3383443)

Dhillon Construction Company (BID ID -3389942)

Baba Engineers and Contractors (BID ID -3383952)

HARISH SALES CORPORATION (BID ID -3383373)