Construction of New Rest House Building at Fatepura, Taluka. Fatepura. District.Dahod under CDP-3 Yojana 2025-26.

No. figures Amount

Civil Work

1 Excavation for foundation upto 1.50mt.Depth including sorting 859.00 Cum. 160.89

out and stacking of useful materials and disposing of the

excavated stuff as directed with in all lead & Lift (B) Dense or

Hard soil.

2 Excavation for foundation upto 1.50mt.Depth including sorting 257.00 Cum. 275.33

out and stacking of useful materials and disposing of the

excavated stuff as directed with in all lead & Lift (C) Hard

3 Excavation for foundation up to 1.5M. to 3.0 mt. Depth including 423.00 Cum 294.05

sorting out and stacking of useful materials and disposing of the

excavated stuff up to 50M. Lead (C) Hard Murrum

4 Filling foundation and plinth with sand under floors including 88.00 Cum 419.82

watering, ramming and consolidating dressing etc, comp.

5 Filling available excavated earth excluding rock in trenches 716.00 Cum 137.47

plinth side of foundation etc. in layer not exceeding 20cm. In

depth consolidation each deposited layer by ramming and

layers of 20 cm. thickness includind watering, ramming and

consolidating etc. comp.

7 Applying general insecticide pest control treatment to floors, 540.00 Cum 54.39

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part - II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical /Sqm

of surface is recommended as per I.S

8 Providing and laying controlled cement concrete M-150 and 77.00 Cum 4166.25

curing complete excluding the cost of form work and

reinforcement concrete work in:(a) Foundation footing base of

column and mass concrete.

9 Providing and laying controlled cement concrete M-250 and 214.00 Cum 4649.03

curing complete including the cost of form work but excluding

the cost of reinforcement concrete work in Foundation footing

bases of column.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

10 Providing and laying controlled cement concrete M-250 and 64.00 Cum 7203.32

curing complete including the cost of form work but excluding

the cost of reinforcement concrete work in Column upto floor

two level. Upto ground level.

11 Providing & laying cement concrete 1: 3 : 6 ( 1 Cement : 3 169.00 Cum. 3273.78

Coarse sand : 6 graded B.T stone aggregate 20mm nominal

size) Curing comp. including cost of form work in foundation

and plinth.

12 Providing and laying Controlled cement concrete M200 using 85.60 Cum. 9159.19

B.T. stone aggregate and curing etc. complete including the

cost of form work but excluding the cost of reinforcement. (a)

Column for All floor.

13 Providing and laying Controlled cement concrete M 250 using 78.00 Cum 5944.86

B.T. stone aggregate and curing etc. complete including the

cost of form work but excluding the cost of reinforcement for (c)

PLINTH BEAM having cross sectional area more than

14 Providing and laying controlled cement concrete M-150 and 44.00 Cum 4364.21

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in Plinth

PLINTH Slab .

15 Providing and laying controlled cement concrete M-200 and 14.00 Cum. 5923.22

curing complete including the costof form work but excluding

the cost of reinforcement for reinforced concrete workn in Wall

caps / Coping / Lintel bends Ground Floor.

16 Providing and laying controlled cement concrete M-200 and 85.00 Cum. 6599.59

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

BEAMS For All Floor.

17 Providing and laying controlled cement concrete M-200 and 20.50 Cum. 7764.57

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

LINTELS All Floor.

18 Providing and laying controlled cement concrete M-200 and 3.30 Cum. 6838.28

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

CHHAJJAS All Floor.

19 Providing and laying controlled cement concrete M-200 and 170.00 Cum. 6,548.88

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in slabs

for All Floor.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

20 Providing and laying controlled cement concrete M-200 using 6.00 Cum 9428.05

B.T. stone aggregate and curing complete including the cost of

formwork but excluding the cost of reinforcement for reinforced

cement concrete work in staircases for all floor

21 Providing T.M.T. bar FE500/500D reinforcement confirmed to 111685.00 Kg. 77.60

for R.C.C. work including bending, binding, and placing. In

position comp. Up to floor two level. For All Floor

22 Brick work using common burnt clay building bricks having 125.00 Cum 3853.23

crushing strength not less than 35 Kg./Sq.m. in foundation and

plinth in cement mortar 1:6 (1 cement:6 fine sand) (b)

Conventional.

23 Brick work using common burnt clay building bricks having 391.00 Cum 4,162.41

crushing strength not less than 35 Kg./ Sqm. in cement mortar

1:6 ( 1 cement : 6 Fine sand ) in super structure above plinth

level upto floor two level ( for all floor ) Conventional

24 Half brick masonary in common burnt clay building bricks 155.00 Sqm 753.23

having crushing strength not less than 35kg./sq.cm. in cement

mortar 1:3 (1 cement : 3 coarse sand ) with 2nos. of 6mm dia

mild steel round bars every three coarse embedded in cement

mortar in superstructure for Ground floor (Conventional)

25 Providing and fixing 12mm thick ( tuffen) glass partition wall and 10.00 Sqm 4040.00

rough surface with neccessay fitting and fastening

etc.Complete

26 Providing and fixing door Double shutter having factory 28.00 Sqm 10161.61

fabricated std. Extruded aluminium colour anodized hollow

section {Section 63.50 x 38 mm x 2.50 mm thick } for door

frame, hollow portion of door frame shall be filled with wood to

be insert for durable grip of door hinges, with 5cm x 15cm size

style and 5cm x 5cm size rails with 6mm thick water proof ply

both side and both side pre laminated with 6 Lever Mortice lock

, SS Aldrop 30cm long, SS Handle size 60 Cm Long, Tower

Bolt size 30 cm and floor spring etc. as per detail colour &

pattern approved by this office including necessary anodized

alluminum fixtures and fastenings.

27 Providing and fixing door Single shutter having factory 47.00 Sqm. 4972.23

fabricated std. Extruded aluminium colour anodized hollow

section {Section 63.50 x 38 mm x 2.50 mm thick } for door

frame, hollow portion of door frame shall be filled with wood to

be insert for durable grip of door hinges door Single shutter

mm.thick flush door teak wood beading 75 x 35mm including

both side in situ laminate with 18mm thick granite frame

Lever Mortice lock , SS Aldrop 30cm long, SS Handle size

Cm Long, Tower Bolt size 20 cm etc. as per detail colour &

pattern approved by this office including necessary anodized

alluminum fixtures and fastenings.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

28 Providing and fixing door Single shutter 35 mm.thick flush door 19.00 Sqm. 6370.07

teak wood beading 75 x 35mm including both side in situ

laminate with 18mm thick granite frame SS Handle size 15 Cm

Long, Tower Bolt size 20 cm etc. as per detail colour & pattern

approved by this office including necessary anodized alluminum

fixtures and fastenings.

29 Providing and fixing Anodized Alluminum Section Jindal Deluxe 62.00 Sqm. 2,756.29

Sliding Window System C (20mm) series sction memebers

THREE track window section bottom track 21651, frame top &

side 21650, shutter frame top rail 20530, bottom rail

side rail 20544, lock rail 20531 with 5mm thick transparent plain

float glass, with transparent silicon sealant with allu. anosized

coated fittings and fixture etc complete.

30 Providing and fixing standared extruded of alluminium section 8.00 Sqm. 1525.00

of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with

colour Powder Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as details etc

complete for Fix window.

31 Providing and fixing standared extruded of alluminium section 5.00 Sqm. 1175.56

of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt) with

colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for Ventilation

{Colour as directed by Engineer in charge except black &

Alluminum section and glass

32 Providing and fixing standard GI Chanel frame for ventilation 49.00 Sqm 2,047.27

with fixed louvers 114mm wide G.I.sheet with thickness of

0.55mm & wt. not less than 400gm per meter roll formed to

create 84mm wide louver snap fixed on special shaped GI

channel. Fix louvers & Channels shall finished with powder

coating of 55microns etc. complete.

33 Providing and fixing 12mm thick Cement Fibre sheet with CNC 27.00 Sqm 2558.33

Cutting as per design or Engineer incharge with fixing on M.S.

Pipe 50 mm sqaure pipe with necessary tools and materials

etc. complete.

34 Providing and fixing Safty grills of required pattern for windows 1680.00 Kgs. 115.95

Rectangular CRC pipes of size 50 x 30 x 2mm at required

spacing as per design including fixing rat mesh and hold

fasting with coach bolts including one coat of primer and two

coats of mattfinished oil painting etc complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

35 Providing and laying Machine cut, Free edges, Machine 62.00 Sqm 2724.98

polished Granite stone slab 18 mm (Average) thick {Single

piece not more than 150 cm } for stair steps and riser as per

design incl. full moulded round front edge & 1 cm nosing &

necessary groobe on trade of steps laid on 20 mm thick cement

mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey

cement slurry including rubbing and polishing etc. complete

36 Providing and laying machine polished machine cut Blue Kota 51.00 Sqm 1017.96

stone slab ( 60 x 45cm Size) flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

25mm thick

37 Providing and laying polished kota stone slab 25mm thick in 3.00 Sqm 1205.60

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete

38 Providing and laying 90 x 90cm GVT Vitrified tiles 8 to 10 mm 729.00 Sqm 1531.82

thick with pattern colour & Shade as detailed approve by

architect ( 10% Dark colour tiles Pattern ) in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand) finishing with flush pointing in

white cement.

39 Providing and laying 60 x 60cm GTV Vitrified tiles 8 to 10 mm 62.00 Sqm 1592.40

thick with pattern colour & Shade as detailed approve by

architect ( 10% Dark colour tiles Pattern ) in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement :

3-coarse sand) and jointed with white cement slurry

40 P & L 24" x 24" vitrified matt finished porceleno 8 mm thick tile 84.00 Sqm 1472.91

flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for

41 Providing and laying coloured glazed tiles of the size 300 mm x 523.00 Sqm 1523.67

600 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers

of steps and dedo on 10 mm. thick cement plaster 1:3 (1

cement : 3 coarse sand) & jointed with white cement slurry.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

42 Provding and filling the joint with epoxy grout 3 mm width and 8 1336.00 Rmt. 40.40

to 10 mm deep, including cost of necessary materials, PVC

spacers, filling grout and cleaning etc complete as directed by

engineer in charge. { Colour and Pattern as directed by

engineer in charge.}

43 Providing and laying water proofing tretment with chaina 478.00 Sqm 1091.81

mosaic tiles flooring over avg 40 mm C.C. 1:2:4 ( 1 Cement,

sand, 1 Kapchi 20mm + 3 grit 6mm to 10mm ) bedding for

maintaining slope for plain and curve surface & 12 mm to

mm of broken piece of ceramic / glazed tiles ( one or more

color as directed ) to be laid over cement mortar bedding of C

M 1:3 (1 cement : 3 sand ) containg one Kg. of water profing

materials per bag of O P C at plain or / and slops and to be

tempered to bring mortar ceramic up to surface with using white

cement and colour pigment including rounding of junctions and

extending them up to 15 cm along the wall and curing with

bends any pattens or design as per drawing and cleaning by

using oxalic acid etc complete.

44 Providing and laying Mirror polished Machine polished Grenite 119.00 Sqm 3280.48

stone slab 18mm (Average ) thick for doors & windows sill &

Jams clading as per design including full moulded round front

steps & 1cm nosing & necessary groove on trads of steps ;laid

on 20mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand )

jointed with gray cement sluury including rubbing and polsihing

etc. complete.for Doors / windows sill & jams clading.

45 Providing 20 mm thick double coat mala cement plaster on 2114.00 Sqm 307.42

interior brick / concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete. For

Ground Floor

46 Providing 10mm thick cement plaster in single coat on 931.00 Sqm 240.28

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) including finishing with a flating coat of neat

cement slurry etc. complete. for Ground Floor

47 Providing and fixing chiken mesh jali with square of 12.50 x 101.00 Sqm 92.92

12.50 mm of 25 gauge at junction the Brick.masonary and

reinforcement cement concrete member including fixing

materials scaffolding labour etc. complete

48 Applying two coats of putty & two coats of primer of approved 3008.00 Sqm 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

49 Wall painting with Applying two coats of putty & two coats of 2220.00 Sqm. 127.42

primer of approved brand (three coats) plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth.

50 Wall painting with Applying two coats of putty & two coats of 894.00 Sqm. 133.03

primer of approved brand & (three coats) with plastic emulsion

paint of approved brand and manufacture on undecorated

ceiling surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

51 20mm thick sand faced cement plaster on walls upto height 10 1794.00 Sqm. 353.98

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) with 1cm x 1cm groovs as

per pattern sample approved by the engineer incharge etc.

52 Providing and fixing 90 cm high Stainless steel railing made 25.00 Rmt. 3144.13

from anticorrocive S S pipe of 50 mm dia (16Gauge) as hand

rail with S S 38 mm dia (16Gauge) as a vertical support fixed in

RCC slab at 1.2m c/c including three horizontal S S pipes of

25 mm dia (16Gauge) at eqal distance fixed by 18.75 mm dia

(16Gauge) S S pipe including accessories as per detailed

drawing as directed etc. complete.

53 Providing laying and jointing in true line and level 15mm dia. 225.00 Rmt. 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

54 Providing laying and jointing in true line and level 25mm dia. 170.00 Rmt. 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. [B] 25mm dia.

55 Providing laying and jointing in true line and level 40mm dia. 40.00 Rmt. 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.[D] 40 mm.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

56 Providing and fixing concealed center point to wall ceiling & 136.00 Rmt. 170.36

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.[A] 15 mm.

57 Providing and fixing concealed center point to wall ceiling & 88.00 Rmt. 253.82

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [C] 25 mm.

58 Providing and fixing concealed center point to wall ceiling & 80.00 Rmt. 447.72

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [E] 40mm.

59 Providing and fixing uPVC Heavy Duty Handle valve of 8.00 No. 373.70

aprroved brand and Quality with required fitting and adhesive

incl. fixing the same with new pipe line as directed by engineer

in charge. (B) 25mm dia.,

60 Providing and fixing uPVC Heavy Duty Handle valve of 4.00 No. 549.44

aprroved brand and Quality with required fitting and adhesive

incl. fixing the same with new pipe line as directed by engineer

in charge. (C) 40mm dia.,

61 Providing, laying and jointing in true line and level 75 diametre 60.00 Rmt. 777.10

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp

of the size 110 mm diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

62 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 97.00 Rmt. 338.95

working pressure poluthene pipes of the following outside Dia.

Low densidy, complete with special flange compression type

fittings, wall clipsetc. including making good the wall ceiling and

floor.(A) 110mm dia.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

63 Providing, laying and jointing in true line and level 110 diametre 124.00 Rmt. 897.79

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp

of the size 110 mm diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

64 Providing, laying and jointing in true line and level 160 diametre 80.00 Rmt. 834.38

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp

of the size 160 mm diametre x 210 mm length x 196 mm heigh

at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

65 Providing and fixing M.S. clamp made from 40mm x 6mm thick 343.00 No. 157.56

M.S. flat as per design given by Engineer in charge foor fixing

the C.I./ G.I. / PVC on wall of duct to stay away from wall etc.

66 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 15.00 No. 733.26

100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

67 Providing and fixing Jaguar ALICHR85079k, ALD-179 Brass 12.00 No. 10423.20

complete Divertor set , silver crome finish divertor outer body of

high flow single lever concealed mixer & divertor for bath &

Shower system with divertor assembly & cartridge sleeve

inclusive exposed parts kits hindware make or equivalant

make complete as ditrected by engineer in charge

68 Providing and fixing Spout heavy duty of following size Brass 12.00 No. 3827.90

chromium plated (i) 15mm dia. ( Hindware, Plumber, Mark, Escco or

equivalent brand )

69 Providing and fixing AKP- 35753P Toilet paper Roll holder with Flap of 12.00 No. 2003.84

Jaguar or equivalent brand as directed by Engineer in charge

including fixing as and where directed etc. complete.(A) C.P. Brass

70 Providing and fixing Flush cock Metropole heavy duty of 12.00 No. 899.91

following size (A) Brass chromium plated ( Plumber, Mark,

Escco or equivalent brand )

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

71 Providing and fixing C.P. Brass health faucet hindware 12.00 No. 1916.98

showers F-16 0013 with cleaning system 1.25mt. Long P,V.C.

flexible tubes and ABS wall hook with angular stop cock

hundware plazza F-18 003 with extension nipple 62mm log etc.

72 Providing and fixing AKP-35731P Soap Dish Holder of jaguar or 13.00 No. 1393.80

equivalent brand as directed by Engineer in charge including

fixing as and where directed etc. complete.

73 Providing and fixing AKP-35735P Soap Dispenser with glass 13.00 No. 2033.13

bottle of jaguar or equivalent brand as directed by Engineer in

charge including fixing as and where directed etc. complete.

74 Providing and fixing screw down quarter turn heavy duty bib 2.00 No. 790.83

taps of following size (A) Brass chromium plated screw down

bib tap (i) 15mm dia. ( Plumber, Mark, Escco or equivalent

75 Providing and fixing C.P. brass shower rose heavy duty with 12.00 No. 928.19

15mm or 20mm inlet.(A) 200mm dia. Each

76 Providing and fixing CP brass Quarter turn pillar tap, capstan 14.00 No. 939.30

head screw down high pressure with screw, shanks and back

nuts (A) 15 mm dia {Long pipe or equivalent brand}

77 Providing and fixing wash basin with pedestal of std. Height 12.00 No. 1890.72

with single hole for pillar tap with C.I or M.S brackets painted

white including cutting cutting holes and making good the same

including C.P. brass waste and waste pipes and bottal trap (A)

Vitreous China: (ii) Flat Back washbasin 550 mm x 400mm

size.In colour.

78 Providing and fixing Wall Mounted Water Closet with integral 12.00 No. 23054.26

"P" and "S" trap including jointing the trap with soil pipe in

cement mortar 1:1 (1-cement, 1-sand) of approved brand

including seat cover for wash down WC with CP brass hinges

and rubber buffers including providing 12.50 Litres low level

flushing cisten with a "P" pair of CI or MS bracket with complete

fitting such as lead valve Sipron 15mm dia brass ball valve with

polythene float CP brass handle, unions and couplings for

connection with inlet outlet and overflow pipes 40mm dia

porcelain enamelled flush bend, including Health Faucet

operated with necessary valve of approved make including

cutting holes in walls and making good the same connecting

the flush bend with cistern and closet etc. complete.(Brand of

All parts to be approved by the Engineer In-charge)

79 Providing erecting and fixing double coated 4-layer tough 3000.00 Litre 9.45

virgin plast ISI water tank of required capacity each with all

necessary fittings and connection etc. complete on terrace.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

80 Providing and fixing Art Street frameless wall mirror for 12.00 No. 3194.63

bathroom bevelled frameless wall mirrior (16 x 24inches silver )

etc. complete.

81 Providing and fixing Towel Rack : AKP-35781P of jaguar or 14.00 No. 3659.23

equivalent brand as directed by Engineer in charge including

fixing as and where directed etc. complete.

82 Providing and fixing S.W. gully trap with C.I. grating brick 8.00 No. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P of R type

83 Providing and fixing CP brass screw down stop cock of 38.00 No. 205.83

approved quality 15mm size with adjustable wall flange..or as

per instrction of engineer incharge.

84 Constructing brick masonry chamber for underground C.I. 8.00 No. 2932.93

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

85 Constructing brick masonry chamber for underground C.I. 12.00 No. 3660.76

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm

deep for pipe line with one or two inlets.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

86 Constructing brick masonry chamber for underground C.I. 6.00 No. 7180.44

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850mm and

450mm deep for pipe lines with three or more inlets

87 Providing and filling screened of burnt coal cinder including and 2.00 Cum 537.77

consoliation etc. complete.

88 Finishing wall with weather proof exterior emulsion paint on wall 2293.00 Sqm. 96.35

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains

of loose powdered materials.etc complete

89 Constructing Sandwitch Platform of 18 mm thick Polished 3.00 Sqm 9204.13

Black Granite at top and 25 mm thick Kota stone slab using

cement mortar 1:3 for sandwich and fitting at bottom & edges

with waterproof rigid adhesives including macking necessary

grooves in walls with Vertical Kotastone 30 mm x 2 No

sandwitch thick every 60 cm centre to cenre including all

labour material of approved quality incl. full moulded round

front edge fixed in wall for partition and jointed with grey cement

slurry including rubbing and polishing etc. complete

90 Providing and fixing stainless steel kitchen sink glossy ASIS 2.00 No. 1275.63

304 grade and 1 mm thick with overall size 510mm x 432mm x

330mm deep having bowl size 410mm x365mm x 165mm of

Nirali or equivalent brand with all fittings CI or MS brackets

painted white or fixing on stone base including cutting holes

and making good the same brass valve and fisher union fitting

including all necessary fittings

91 Constructing Washing Platform 18mmm thick Polished Black 5.00 Rmt. 8910.22

Granite at top and 25 mm thick Kota stone slab using cement

mortar 1:3 for sandwich and fitting at bottom & edges with

waterproof rigid adhesives including macking necessary

grooves in walls with Vertical Kotastone 30 mm x 2 No

sandwitch thick every 60 cm centre to cenre including all

labour material of approved quality incl. full moulded round

front edge fixed in wall for partition and jointed with grey cement

slurry including cutting and fixing wash basin including rubbing

and polishing etc. complete

92 Providing thoruting or plaster drip and moulding to R.C.C. 53.00 Rmt. 43.05

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

93 Providing 12mm wide groove throating / notch in plaster 467.00 Rmt. 15.15

including finishing the same etc. complete for all height.

94 Providing and fixing 18MM TERMITE PROOF PLY 3.00 Sqm. 22361.40

(GREENPLY OR EQUIVALENT) WITH BOTH SIDE

LAMINATE & PVC BEADING ON PERIPHERY and Providing

and Fixing Stainless Steel (Grade -316) accessories, sheet

cutlery basket (2 Nos), Thali Basket(2 Nos), Plain Basket(2

nos), Cup Saucer Basket (2 Nos) of size 520 x 485 x 100 mm

fixing on telescopic channel (GODREJ OR EQUIVALENT)

having hardware like handles, dead lock, magnet etc with fixing

all expose surface are decoartive laminate sheet and other

inner surfaces are 1.0 mm thick lamiate including all necessary

fixture and fastening ( Steel handle, hinges, stopper , chains

and locking arrangement etc. complete as directed by Engineer-

in-charge.

95 Providing and fixing in position 300mm high , 150mm wide 30.00 No. 707.00

englsih letter made from 1.0mm thick stainless steel sheet as

directed by enginer in charge with all necessary tolls & plants

etc. complete.

96 Providing and fixing in position 150mm high , Englsih letter 80.00 No. 404.00

made from 1.0mm thick stainless steel sheet as directed by

enginer in charge with all necessary tolls & plants etc.

97 Providing and laying in foundation cement concrete 1:4:8 (1 19.00 Cum. 2680.09

cement : 4 coarse sand :8 graded stone aggregate 40mm

nominal size) and curing complete excluding cost of form work

in :(a) Foundation plinth.

98 Providing and fixing mild steel door with 40 x 40 x 6 mm angle 400.00 Kgs. 114.33

for frame and for shutter frame 30 x 30 x 3 angle. For windows

frame of angle 35 x 35 x 5 & for shutter windows 25 x25 x

mm size angle and 18 gauge sheet for panels & 10 mm dia

bars at 10 cm c/c for grill and 40 x 6 mm flats on edge of

shutter, & 20 x 6 mm binding patti, including one coat of primer

and two coats of oil painting etc. comp. as per detail / as

directed by Engineer in charge.

99 Providing 15mm thick cement plaster ( Mala Trowel finish) in 683.00 Sqm. 231.38

single coat on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement

mortar 1:4 (1-cement:4-sand) for Ground Floor

100 Providing 20 mm thick Water proof cement plaster for sunk in 41.00 Sqm 246.84

single coat on bricks/ concrete wall for interior plastering upto

floor two level finished even and smooth (ii) Cement mortar 1:3

(1- cement : 3-sand) and mixing waterproofing materials of

approved brand and manufacture in cement mortar in

proportion recommended by the manufacturer for All Floors.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

101 Providing and laying white glazed tiles 6mm thick in flooring 13.00 Sqm. 911.46

treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

102 Providing and laying white glazed tiles 6mm thick in skrting 41.00 Sqm. 1017.48

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

103 Providing cement vata (10cm. x 10 cm. size) quarter round in 15.00 Rmt. 24.28

cement mortar 1:1 including neat cement finishing, watering

etc. complete.

104 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size 2.00 No. 958.17

having weight not less than 35Kg.

105 Providing laying and jointing in true line and level 50mm dia. 90.00 Rmt. 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.[E] 50 mm.

106 Providing and fixing S.S Butterfly valve of IS aprroved brand (C) 2.00 No. 808.00

50mm dia.,

107 Providing and fixing M.S.Compund gate of required pattern to 675.00 Kgs. 166.22

fix on wall as per given detailed drawing using M.S. flats, M.S.

Square bars, Cast iron decorative pattern and fixing with

necessary required nuts, bolts and welding works etc. comp. (

B) Ornamental

108 Providing and fixing M.S. grill of required pattern to wooden 288.00 Kgs. 110.31

frame of windows etc. with M.S. flats of required spacing in

frames alround square or round bars with round headed bolts

and nuts or by screws of windows or clearstory windows ( A )

Plain grill

109 Painting two coats including priming coat on new steel and 123.00 Sqm. 138.78

other meatl surfaces with enemal paint brushing interior to give

an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

110 Providing water harvesting pit 2.40 mt dia x 2.40 mt depth with 2.00 No. 75075.32

excavation in any strata filling the pit with brick bats in 0.60 mt

depth, 0.30 mt with 25mm to 40mm kapchi 0.30 mt with 10mm

to 20mm kapchi & 2.00 mm depth with coarse sand in layer

including maing the lines (PVC) for water inlet etc. as directed

including 250mm dia bore work with 6" PVC" pipe upto 35mt

etc, comp.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

111 Supplying & installing of Dry Chemical Powder type 6 Kg. 8.00 No. 2222.00

Capacity fire extinguisher as per I.S. 2171 ISI. Mark with

necessary fittings etc. complete.

112 Providing Carben doxide type fire extinguisher 4.5Kg. Capacity 8.00 No. 5706.50

with I.S.I. Mark and test certificate of explosive deprtment of

113 Providing and laying ordinary cement concrete 1:2:4 ( 1 cement 1.00 Cum. 3653.61

: 2 coarse sand : 4 graded stone aggregate 20mm nominal

size) and curing etc. complete including the cost of form work

but excluding the cost of reinforcement.(a) Footing.

114 Drilling of 215mm dia. Bore in over burden strata (0-30) 200.00 Rmt. 660.54

including lowering and fixing of 175 mm nominal dia UPVC

pipe/175 mm dia ERW pipe upto required depth and further

drilling of 165mm dia bore hole in rocky strata by DTH rig..

115 Providing and lovering 175 mm dia PVC 6 kg / sqcm. Casing 100.00 Rmt. 909.00

pipe in bore hole with necessary fitting etc. complete.

116 Providing and fixing M.S. Cap plug hinge type with frame of 1.00 No. 661.45

required design for 175 mm dia bore casing pipe

117 S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. 2.00 Set 26894.28

or more having three phase motor capacity not more than

H.P. with following capacity (A) (25 stage) 120 to 125 LPM

discharge at 155 to 120 mtrs. head respectively suitable for

mm dia. delivery pipe Cat. III

118 Supplying and erecting submersible horizontal & vertical pump 2.00 Set 18746.61

set following discharge& head 5 H.P. 3 Phase 400/ 440 VA.C.

motor with following Cat. III section and discharge flange size

(C) 405 LPM at 30 mtr. head with size 50 mm cat. II.

119 Supplying & erecting approved make motor control cubical 1.00 No. 7722.46

panel ( Direct -on - line ) made from 16 G. CRCA sheet duly

epoxy powder coated in side and out side with hinged doors

and locking arrangement consisting of suitable size of on-off

isolator ( A.C. 3123 duty) main fuses single phasing prevented

in dictating lamps for R-Y-B phases over load relay ammeter

duly socket crimped main connector & over load, relay start

stop push button the isolator over load relay and contactor will

be of L & T , siemens cutler hammer make only (A) D.O.L.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

120 Supplying & erecting approved make motor control cubical 1.00 No. 8710.24

panel ( Direct -on - line ) made from 16 G. CRCA sheet duly

epoxy powder coated in side and out side with hinged doors

and locking arrangement consisting of suitable size of on-off

isolator ( A.C. 3123 duty) main fuses single phasing prevented

in dictating lamps for R-Y-B phases over load relay ammeter

duly socket crimped main connector & over load, relay start

stop push button the isolator over load relay and contactor will

be of L & T , siemens cutler hammer make only D.O.L. for

121 Lowering of submersible motor pump set comlete with required 1.00 Job 2996.67

nos. and size of casing pipes erected by means of proper chian

pully block & pipe wrenches after checking of threades of each

pipe with coupline take the load of the pump set and pipe

assembly fitted up with water (3) above 120 mt.

122 Providing and erecting PVC insulated flat flexible cable ISI. 250.00 Rmt. 104.03

Marked approved make of (B) 3 core X 2.50 sqmm.

123 Providing and fixing H.D.P.E. PVC Column pipe heavy duty 180.00 Rmt. 151.50

length and thread on both the ends with 8TPI or 11TPI as

required as directed ( a) 40 mm dia

124 Heavy duty clamp made from 4" x 1.5 " iron strips suitable for 1.00 No. 179.78

column pipe 1.5 to 2" length (A) 50 mm (1.5") dia pipe.

125 Box cutting the road surface to proper slope and chamber for 207.00 Cum. 112.02

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed up to

mts. Lead.

126 Supplying and laying, spreading and compacting coarse clean 38.00 Cum. 388.85

sharp specified sand (C.B.R. not less than 10%) below sub

base course including carraige of material spreading in uniform

layers manually on prepared base and compacted with power

roller to achieve desired density including all materials, labours

etc. complete. and spreading coarse clean sand as directed.

127 Providing and laying 300mm thick W.B.M. with B.T.M.C. metal 57.00 Cum. 1192.81

40mm to 63mm size two layer of 150mm thick including using

25% stone dust as filler including spreading watering

consolidation and rolling etc. complete at site of work including

loading unloading and filling the boxes etc. complete.

128 Providing and laying controlled cement concrete M.250 and 73.00 Cum. 4366.23

curing complete including the cost of formwork and

reinforcement for reinforced concrete work in(A) Foundations,

footings, Base of columns and Mass concrete

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

129 Compaction and finishing of cement concrete road by tremix 363.00 Sqm. 85.85

process, providing extra labour charge for tremix ( Vaccum

dewatering service ) process on cement concrete road surface

by using vaccum dewatering pump floater surface vibrator

including making groove 5mm width and filling with polyvynile

polymer and rough finish to surface as per instruction including

leveling etc. complete.

130 Providing and fixing junction board of M.S.plates and angles as 2.00 No. 5236.70

per standered IRC design including fixing in C.C. 1:4:8 with

necessary excavation , painting, figuring and lettering on board

etc. comp.

131 Providing T.M.T. bar ( Thermo Mechanically treated Bars) 1260.00 Kgs. 72.43

reinforcement confirmed to IS-1786 Fe415 for R.C.C. work

including bending, binding, and placing. In position comp. Up to

floor two level. For Ground Floor

132 Providing and fixing 150 x 150 x 3.2 mm thick M.S. pipe 48.70 Qtls. 9108.48

parking shed post & Rafter & Cross , MS 50 x 50 x 2mm pipe

purlines with necessary M.S. plate 8mm hick including cutting

bending , grinding , welding , drilling for nut bolts including

painting two coats of oil painting over primer coat etc. complete.

133 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall 198.00 Sqm 1441.90

roofing sheet fixed with hilti screw and rubber silicon sealer and

alluminium strip of size 50 x 3 mm etc complete as irected by

Engineer in charge

134 Providing and fixing pre-cast Rubber Dye / Steel Dye inter 456.00 Sqm 702.02

locking concrete block 60mm thick with grade of concrete M300

pnumetic compressed/ Vibrated mechanically and as per

approved design Confrming to IS 15658:2006 including 35mm

sand layer for leveling and filling the joint with sand in proper

line and level as per guidlines of IRC: SP 63 -2018 etc.

135 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 8.00 Sqm 1120.36

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

136 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 2.00 Sqm 1195.02

skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white cement

137 Providing and laying Controlled cement concrete M 200 using 1.00 Cum. 6578.25

B.T. stone aggregate and curing etc. complete including the

cost of form work but excluding the cost of reinforcement for

R.C.C. vertical Fins

138 Providing and fixing tiles roofing with manglore tiles including 73.00 Sqm. 280.45

teak reepers of sizes 50mm x 25mm

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

139 Removal of existing grass from top soil upto a depth of 23 cm 788.00 Cum. 50.50

breaking and drying of lumps, removal of all dried roots,

cleaning the soil and rought leveling and preparing the lawn bed

, preparing and laying of peat moss mulch , mixing : watering

laying adequate quantity of loam oil bed : grading and

compaction by watering.

includind watering, ramming and consolidating etc. comp.

141 Planting of lawn of approved quality at 15 cms diagonally, 788.00 Sqm. 75.75

maintenance of the laen till virtual completion of soft landscape

work : removal of all thatching through out the area: along with

appropriate use of termite and of weedixite as red when

required and grassing lawn.

142 Demolition including stacking of serviceable materilas and 19.00 Cum. 1108.12

disposal of unserviceable materials with all lead and lift. (i)

R.C.C. work

143 Demolition of Brick work and stone masonry including stacking 121.00 Cum. 576.30

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.(ii) In Cement Mortar.

144 Dismentling doors, windows, ventilators etc. (wood or steel) 21.00 No. 196.66

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and

lift.(i) Not exceeding 3 Sq.M. in area.

145 Dismentling steel work including distempering and stacking the 950.00 Kg. 3.94

materials with all lead and lift.

146 Dismentaling tiled of stone floors laid in mortar including 120.00 Sqm. 50.28

stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.

Total of Civil Work

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

Electrification Work

147 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 162.00 No. 485.81

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with extured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ ceiling complete, Cat-III [1-2-1]

148 Point wiring for secondary light point with 2-1.5 sq.mm & earth 96.00 No. 167.66

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires, in below type of

pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal

/ PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as

directed. Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point. (f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete.

149 Point wiring for Two Way Controlled Light Point with 2-1.5 5.00 No. 603.96

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed.(f) with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat-III [1-2-5]

150 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 43.00 No. 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC/ Metallic/ Wooden box, single mounting base frame

covered with textured/ metallic/white front plate modules

erected on/ in wall/ ceiling as per pipe erected. with necessary

ceiling rose/ H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/

ceiling complete, Cat-III [1-2-2]

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

151 Providing following type of Modular Type Accessories mounted 5.00 No. 398.95

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation

directed by Engineer In charge. (5) Electronic hum Free steps

EME Fan regulator. Cat III.

152 Point wiring for on board Looped Plug with 6A Modular type 122.00 No. 257.55

switch & 5 pin socket erected on PVC / metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories. cat III.

153 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 29.00 No. 510.05

(Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories. [I] For 6A

Plug with 2-1.5 sq.mm Cu. Wire.(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete. cat III.

154 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm 16.00 No. 745.38

(Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [II] For 16A Plug with 2-2.5

sq.mm Cu. Wire. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. cat III.

155 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm 16.00 No. 871.63

(Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [III] For 16A Plug and

amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green)

earthing wire from mcb d b board.. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete. cat III.

156 Providing & erecting Switch board for Computer or electric 10.00 No. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug . For Modular Type Accessories. Cat III.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

157 SITC of Face Plate - Single (Keystone Jack,square) [Approved 22.00 No. 90.90

by Competent Authority i.e. not Below the rank of Executive

Engineer ].

158 SITC of Jack Cat 6 Keystone UTP [Approved by Competent 22.00 No. 161.60

Authority i.e. not Below the rank of Executive Engineer ].

159 Supplying & erecting approved make LAN cable of following 1850.00 Rmt. 76.76

size in existing pipe as per direction. [D] CAT - 6 e. for LAN

points & for cctv points.

160 Providing & Erecting 6 core fibre optic SM 9/125um double 100.00 Rmt. 60.60

sheath, CSTA, Unitube,Outdoor cable (per m).

161 Supplying & erecting approved make Telephone Cable 100.00 Rmt. 125.24

electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to

C-DOT erected in existing pipe. of following size of conductors

& nos.of pairs. With necessary connections. [A] Conductor Size

0.5 mm . (b) Armoured [Jelly Filled]. (1) Ten Pairs.

162 Supplying & erecting approved make Telephone Cable 950.00 Rmt. 20.20

electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to

C-DOT erected in existing pipe. of following size of conductors

& nos.of pairs. With necessary connections. [A] Conductor Size

0.5 mm . (a) Unarmoured. (2) Two Pairs

163 Providing following type of Modular Type Accessories mounted 13.00 Ea. 210.08

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation

directed by Engineer In charge. (3) Two Pin/RJ-11 Telephone

Socket. [B] For Two Gang. Cat III.

164 Providing and erecting ISI mark Medium class RIGID PVC 750.00 Rmt. 24.24

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (a) 20 mm.

165 Providing and erecting ISI mark Medium class RIGID PVC 1250.00 Rmt. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 25 mm

166 Providing and erecting ISI mark Medium class RIGID PVC 100.00 Rmt. 54.54

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (c) 32 mm.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

167 Providing & erecting PVC Corrugated Flexible Conduit with 100.00 Mtr. 17.17

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (1) 20 mm.

168 Providing & erecting PVC Corrugated Flexible Conduit with 50.00 Mtr. 21.21

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (2) 25 mm.

169 Providing & erecting PVC Corrugated Flexible Conduit with 25.00 Mtr. 27.27

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (3) 32 mm.

170 Providing and erecting Mains with 1.1 KV grade FRLS PVC 75.00 Mtr. 62.62

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC pipe and

accessories. (a) 2 wire 1.5 sq. mm.

171 Mains with 1.1 KV grade FRLS PVC insulated ISI marked 1250.00 Mtr. 82.82

stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (a) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm.

172 Mains with 1.1 KV grade FRLS PVC insulated ISI marked 1350.00 Mtr. 112.11

stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid PVC

pipe and accessories (a) 2 wire 4 sq. mm.

173 Mains with 1.1 KV grade FRLS PVC insulated ISI marked 10.00 Mtr. 147.46

stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size. (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 6 sq. mm.

174 Mains with 1.1 KV grade FRLS PVC insulated ISI marked 70.00 Mtr. 260.58

stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size. (a) with medium class Rigid PVC

pipe and accessories. (h) 4 wire 6 sq. mm. (Main Panel to LDB

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

175 Supply, Installation, Testing and Commissioning of suitable 43.00 Ea. 2629.03

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit

with earthing provision, copper winding, Power factor not < 0.9,

Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control and

all remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.), suitable for

140 to 285 Voltage and rectifier circuit with surge, over current

and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.[ Make shall be approved by

Engineer in Charge] (A) 1200 mm Sweep (48").

176 Supplying and erecting 19 / 20 mm. nominal bore Medium 30.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan complete

with proper insulation without leckage and earthing

177 Supplying & erecting fan hook box of 10 mm M.S. round bar 43.00 No. 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

178 Supplying & erecting single phase approved make industrial 2.00 No. 3937.99

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size

and maximum speed in RPM [E] 450 mm dia 1400 RPM

179 Supplying & erecting approved make low noise decorative 12.00 No. 1703.87

exhaust fan having square frame ABS body with inbuilt lowers

& square frame. 200mm with 1350RPM

180 Decorative call bell Ting-tong box type 250 volts complete 15.00 No. 71.71

181 Sheets steel powder coated enclosure suitable for incorporating 18.00 No. 176.75

One/Two nos. MCB. - use for AC control

182 providing and erecting Miniature circuit breaker single pole 6A 60.00 No. 112.11

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark cat III

183 providing and erecting Miniature circuit breaker single pole 5.00 No. 270.68

0.5A to 2A system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS 8828/1996

with ISI Mark . cat III. - this is used for streelight poles.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

184 Providing & erecting 240 V MCB double pole switch for motor & 36.00 No. 299.97

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp. cat III. In DBS & for AC control.

185 Providing & erecting 240 V MCB double pole switch for motor & 3.00 No. 330.27

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity.

(B) 40 Amp. cat III

186 Approved make ELCBs / RCCBs conforming to IS: 12640 and 6.00 No. 1969.50

having sensitivity of 30 mA and Short Circuit withstand capacity

of 6 KA and suitable for operation on single phase 240 V.

having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed. (i) 25 Amps.DP. cat

187 Approved make ELCBs / RCCBs conforming to IS: 12640 and 6.00 No. 2235.13

having sensitivity of 30 mA and Short Circuit withstand capacity

of 6 KA and suitable for operation on single phase 240 V.

having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed. (ii) 40Amps. DP . cat

188 Approved make ELCBs / RCCBs conforming to IS: 12640 and 12.00 No. 2654.28

having sensitivity of 30 mA and Short Circuit withstand capacity

of 6 KA and suitable for operation on single phase 240 V.

having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed. (iii) 63 Amps. DP. cat

189 Providing & erecting 415V MCB Four Pole Switch for Lighting 3.00 No. 578.73

Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity (a) 6 to 32 Amp

190 Providing & erecting 415 V MCB Four Pole for Motor & 8.00 No. 737.30

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(c)63 Amp. cat III.

191 Half / One Module Blanking Plate of Standerd Size. 15.00 No. 9.09

192 Providing and erecting Sheet Providing and erecting Sheet 1.00 No. 629.23

Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

outgoing. (b) sheet steel double door (IP-43) (i) 4 way.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

193 Providing and erecting Sheet Steel powder coated MCB 1.00 No. 1492.78

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of

MCB to be used) suitable for (A) single phase incoming

and horizontal single phase outgoing. (b) sheet steel double

door (IP-43) . (iv) 12 way .

194 Providing and erecting Sheet Steel powder coated MCB 8.00 No. 2913.85

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to

be used) suitable for (B) three phase incoming and single

phase horizontal type outgoing Per phase isolation type

(b) sheet steel double door. (ii)6 way.

195 Providing & erecting weather proof, dust & vermin proof, floor 2.00 Sqm 16323.62

mounted front operated outdoor type double door cubical panel

board necessary IP-54 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copperaluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following approved

manufacturers with following size. (B) The standard companies

switch gear shall be used and only manufacturers at CPRI

approved factory (i) with 350 mm depth

196 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, 6.00 Mtr. 17.17

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

witchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (b) One wire 1.50 sq.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

197 Mains with ISI marked, 1.5KV grade electrolyte multi 86.00 Mtr. 37.37

stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm. ( for panel internal wiring &

green wire for earthing from panel to diff ACDBS ).

198 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, 15.00 Mtr. 56.56

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq.

199 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, 24.00 Mtr. 91.91

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. (f) One wire 10.00 sq.

200 Mains with ISI marked, 1.5KV grade electrolyte multi 46.00 Mtr. 142.41

stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if required.

(g) One wire 16.00 sq. mm. ( for panel internal wiring &

green wire for earthing from panel to diff earth pits ).

201 Mains with ISI marked, 1.5KV grade electrolyte multi 3.00 Mtr. 236.34

stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if required.

(h) One wire 25.00 sq. mm.

202 Providing and erecting Approved make Four pole 1.00 No. 16221.61

moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S.housing . ICS=100% of ICU only Cat III.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

203 Providing and erecting Approved make Four pole 1.00 No. 17843.77

moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S.housing . ICS=100% of ICU only Cat III. Add Rs.

10% extra for housing/Encloser of MCCB for Item No 3-4-

1 to 3-4-12 (The Enclosures should be used of same

company of MCCBs to be used).

204 Approved make Earth fault Relay suitable to mount with inter 1.00 No. 4983.34

connection to moulded case circuit breaker having CT ratio &

MCCB rating as following along with shunt trip 220V AC. with

all internal connections & complete erected in existing

M.S.housing. (2) 125 A -200 A , CT Ratio 1/200

205 Supplying & erecting approved make Four Pole 415V change 1.00 No. 12241.20

over switch interior for panel mounting with operating

mechanism A.C.23 duty confirming to IS for (D)200A. Cat III.

206 Supplying and erecting triple pole & neutral 440V / 500V panel 2.00 RnMtr 3202.71

mounting Copper Busbars with four equal Nos. of electrolyte .

bus having current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing cubical panel

with necessary connections. (B) Suitable for 200 Amp. capacity.

207 Supplying and erecting approved make panel mounting type 1.00 No. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts

range erected on existing panel board with all connection,

wiring etc .with manufacturers calibration certificate.

208 Supplying and erecting approved make panel mounting type 1.00 No. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate on

500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration certificate

3 phase AC Supply 500 V on existing panel board with

necessary connections

210 Supplying and erecting approved make suitable panel indicator 3.00 No. 43.43

LED type lamp, lens cover, complete erected with necessary

connections

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

211 Supplying & erecting in earthpit of minimum bore dia. 225mm 2.00 No. 10593.89

size ASH or approved make Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free G.I.Pipes having Outer pipe dia of 80 mm having

80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications [C] For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA)i.e.

independent Earthing located in other than normal soil i.e. Soft

Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg

212 Providing and erecting Pipe type earthing having 150 5.00 No. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire. - this will ben used

for streetlight poles.

213 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 40.00 Mtr. 490.86

cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables. (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm

1/2 core). (Main cable from transformer to meter panel. ).

214 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 50.00 Mtr. 676.70

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables. (A) 4 core 10 Sq. mm Cu.

Conductor YWY cable. (Main Panel to ACDB.)

215 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 90.00 Mtr. 271.69

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables. (A) 4 core 2.5 Sq.

mm . (Main Panel to streetlight dbs & bore motors.).

216 Supplying and erecting Flexible PVC insulated multi strand 20.00 Mtr. 46.46

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. (e) 1.50 Sq.mm 3 core round

PVC sheathed. - streetlight pole box to fixture .

217 Providing and, fixing heavy duty flange type brass cable gland 4.00 No. 131.30

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

cables. (D) 3 & 1/2 core 95 Sq. mm . (Main cable from

transformer to meter panel. ).

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

218 Providing and, fixing heavy duty flange type brass cable gland 4.00 No. 38.38

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

cables. (C) 2 to 4 core 10 Sq. mm. (Main feeder Panel to LDB,

219 Providing and, fixing heavy duty flange type brass cable gland 4.00 No. 38.38

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

cables. (B) 2 to 4 core 6 Sq. mm. (Main feeder Panel to LDB,

220 Solder less crimping type Copper lugs conforming to IS suitable 24.00 No. 8.08

for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium

plated nut bolts in an approved manner. (A) 1.5/2.5 to

Sq.mm. (Main feeder Panel to LDB, PDB.).

221 Solderless crimping type Copper lugs conforming to IS suitable 16.00 No. 10.10

for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium

plated nut bolts in an approved manner. (B) 10 Sq.mm.

222 Solderless crimping type Aluminium lugs conforming to IS 8.00 No. 40.40

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (F)

223 Providing & laying approved make Double walled corrugated 150.00 No. 62.62

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth for laying of cable. below ground /road surface for

enclosing cable and back filling the same to make ground as

per original.(A)50 mm dia.

224 Providing & laying approved make Double walled corrugated 50.00 No. 95.95

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth for laying of cable. below ground /road surface for

enclosing cable and back filling the same to make ground as

per original.(C))90 mm outer dia

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

225 Supplying and erecting LED indoor fittings with LEDs of 33.00 No. 295.93

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than

0.9, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED LED driver efficiency > 85 % ( fitting required

LM-79 & LM-80 Certificates)(NOTE: Below description have\

shown ranges of Wattage capacity of LED fittings.The Engineer

shown.). (A) Tube Light with integral

226 Supplying and erecting LED indoor fittings with LEDs of 198.00 No. 427.23

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in minium casted body with company

mark/name 160V to 270V,Power Factor more than 0.9, THD <

15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required LM-

79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The ngineer

shown.). (A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

complete.IP20. (ii) 11-15 watts, Surge-2 KV. 195 nos.

Rs.423.00 ൠ82,485.00 2.15.3. A. (ii).82 Supplying and erecting

LED street light / Flood light fittings with High

227 Supplying and erecting LED street light / Flood light fittings with 5.00 No. 3346.12

High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminium housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

shown.). (A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-voltage

protection. (i) above 36 to 48 watts.. Cat - III.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

228 Supplying and erecting Street light pole bracket comprising 5.00 No. 491.87

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm / require size of

pole top having nuts and bolts for fixing the brackets and having

spread of 0.5 mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with check nut

complete painted with one coat.of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with following nos

of arms. [A] Single Arm bracket 0.5 Mtr.

229 Supplying and erecting approved make Octagonal pole 5.00 No. 6874.06

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site

requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg.

230 Supplying & erecting approved make IP 55 grade Company 1.00 No. 12399.77

fabricated Timer Panel of following capacity for switch On-Off

street lights on time scheduling basis made from 16G CRCA

sheet duly epoxy power painted inside and outside with hinged

doors and locking arrangement consisting of suitable size of

Pole MCB and 4 pole contactor (cat-III)with analog time switch,

auto manual switch of same make and suitable input and output

Bakelite terminals and with door earthing approved by Engineer

in charge. (A) 32 Amp .

231 Supplying & erecting IP 55 grade following size section pillar 1.00 No. 16691.26

fabricated from joint \less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm

M.S. Angle of Two Nos. one is welded and other with nut and

bolt for erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage proof &

tested as per IP 55 test & followed by IS 2147 of 1962. (A)

X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet

with angle iron legs 95 cm long made from 40 X 40 X 6 mm

thick MS angle.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

232 Supplying and erecting LED Solar street lights with High power 5.00 No. 36154.97

White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name

engraved or embossed with 36 hours battery backup & MPPT

24V,7.5 A charge controller with 12 hours

automatic switch on/off with wind speed resistance 44 m/s as

per IEC 61215. (E) 36W,3000 lumens, IP-65, PV Module –

2x100W and 6 mtr poles complete erected.

233 Supplying stand first AID box with antiseptic cream, medicine 2.00 No. 299.97

for use on wounds due burn, crepe bandage, gauge bandage,

medicated ready to use bandage (Bandaid) adhesive tape for

medicinal user, Scissors, anti-septic solution (Savlon or similar)

etc. (All above contents shall be of standard makes)

234 Supplying and erecting floor mounting stand for keeping four 2.00 No. 942.33

nos. of FIRE buckets comprising 1500 mm in length, 900 mm

height frame made out of 30mm X30 mm X 4 mm angle iron

with cross supports for legs, welded with 4 hooks and duly

with one coat of red lead and two coats of approved enamelled

silver paint

235 Providing and fixing printed instruction chart both in English and 2.00 No. 130.29

Gujarati and duly framed with front glasses, for treatment of

person suffering from Electric shock with minimum 50"

diagonally size.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

236 Supply, Installation, Testing & Commissioning of following size

of Grid Tied Solar Power Plant with Solar Panels (ALMM

approved): Frame Material : Anodized Aluminum alloy Frame

With Twin Wall Profile, Front Cover : High Transmission Low-

Iron Tempered Glass (AR Coated), High efficency and positive

power tolerance Pmax: 0/+5, Module efficiency should be

approx. 19.5%-22%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence test

to ensure error free Modules, Thep. temp. co-efficient of the PV

module shall equal or better than - 0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit Production:-

More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year

Product warranty and 25 year Linear Power Warranty includes

all mechanical and electrical parameters of the Solar panel.

Modules must be complied to the DCR(Domestic content

requirements). The Ration of AC to DC is 5:6 for the Installation

capacity which are given in AC KW. Solar Inverter: MPPT

Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% -

98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ”4000,

O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Integrated protection of Inverter are Anti-

islanding Protection, Input Reverse Polarity Protection,

Insulation Resistor Detection, Ground fault protection, Residual

Current Monitoring Unit, Output Over Current Protection,

Output Short Circuit Protection, Output Over Voltage

Protection, PV array string fault Protection. Protection Degree:

IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi.

237 (C ) Grid Tied Solar Power System: 11 - 25 kW (3 - phase). 8.00 KW 44081.45

Total of Electrification Work

Total Amount (Civil+ Electrification) TOTAL Rs.

Total Amount (Civil+ Electrification) TOTAL Rs.

i.e. Rupees Three Crore Five Lakh(s) Fifty Three Thousand One Hundred Twenty One And Paise Eighty

Three Only

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Deputy Executive Engineer

Panchayat (R & B) Sub Division Godhra Electrical Sub Division

JHALOD R&B Deptt. Godhra

Divisional Account Officer Executive Engineer

Panchayat (R & B) Division Godhra Electrical Division Executive Engineer

DAHOD R&B Deptt. Godhra Panchayat (R & B) Division