Civil works Weigh Bridge foundation at Milma Palakkad Dairy and Milk Chilling Plant, Attapady.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works up to plinth level.(minimum cement content of 370 kg/cum for M25 grade and, No extra claim shall be entertained for any additonal quanity of cement if required as per the design mix)

CONCRETE WORK:Plain cement concrete (1 cement: 4 coarse sand : 8stone jelly) using 40mm and down gauge graded, hard blue granite stone aggregate, laid and well consolidated in foundation and basement etc., all as complete and directed by Engineer in charge.

Construction of granular sub-base by providing close graded Material conforming to specifications,mixing in a mechanical mix plant at OMC,carriage of mixed material by tippers to work site,for all leads&lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density,complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (sizerange75mmto0.075 mm) having CBR Value-30s

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Supply, fabricate and erect in position structural steel work for trusses, frame work, purlins, girder, column, rafters, strus, wind ties, floor tie beam, structural members for strew box, side cladding, platform etc. as per design including riveting, welding in rolled steel sections and plates with all necessary nuts, bolts, riverts, gusset, plates etc. complete including cost and conveyance of all materials,labour charges, lead,lift etc. and painting with two coat of anticorrossive Yellow zinc chromate primer and 2 coat of synthetic enamel paint of approved make finished to even shade as per technical specifications.

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge

BINU VISHNUDAS