Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC Successful Bidder | |
| 2 | L2₹10.1 L+₹34,888.40 (3.59%)Rejected-Finance ABHAYNAGAR JAGATPUR PO ABHAYNAGAR AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹10.1 L+₹42,169.80 (4.34%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹10.2 L+₹47,602.10 (4.90%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹10.3 L+₹57,252 (5.89%)Rejected-Finance RONALDSAY ROAD JOYMAGAR BUS STAND AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹9.7 L
EMD Value
₹19,400
Closing Date
30 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
PROVN OF SHELTER, RAISED PLATFORM, SCREEN WALL AND BAR COUNTER AT BDE OFFRS MESS IN ZONE R AT MIL STN AGARTALA
2022_MES_566426_1
8335/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹19,400
Yes
12 Jan 2023
2 Dec 2022
2 Jan 2023
2 Dec 2022
30 Dec 2022
16 Dec 2022
Amount
Schedule'A' Part-I: B&R works
Surface excavation n.exc 30cm deep and avaraging 15cm deep and getting out in soft/loose.
M & L hard core of broken stone boulders to gauge n exc 63 mm all as spd and directed by Engineer-in-charge.
M & L for cement concrete (1:3:6) Type C2 using 40mm graded aggregate in foundations, filling and mass concrete
Excavation in trenches n.exc 1.5 M wide and n.exc 1.5m deep as in soft/loose soil for foundation etc or for shaft walls, cesspit, manhole etc n.exc 10Sqm on plan
M & L for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.
M & L for half brick thick brick work sub class 'B' brick straight or curved on plan to any radius in CM 1:4 complete all as spd and directed .
M & L returning, filling including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in hard / dense soil complete.
M & L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white
M & L removing excavated material exc 250 Mtrs but n exc 500 Mtrs and depositing where directed by Engineer-in-Charge.
M&L TMT bars of 10mm dia and over cut to lenth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
M&L RCC type B1 (1:2:4) using 20 mm graded aggregate ) slabs supported on walls, beams and columns in floors, roos, landing,balconies deck slabs and in shelves and like.
M&L form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick
M & L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide
M & L for ceiling plaster 5mm thick in CM 1:3 incl preparation of surfaces.
M & L for 02 coats of white wash on ceiling incl prep of surfaces
M&L for 15 mm thick rendering in CM 1:4 in finishing the surface even and smooth without using extra cement. (WPC shall be measured and paid seperately)
M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:4
M & L for Supply and fixing glazed ceramic tiles (200x200mm) x 7mm thick, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in CM 1 : 4 all as specified and directed by Engr-in-charge
Demolition of brick work built in cement mortar.
M&L for Excavating in post holes ( or similar holes ) each n exc 1.5 cum, getting out soft loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.
M&L roof trusses framed, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, Sqr tube angle, channel or flat sections Fe-410W) including distance pieces, cleats etc.
M & L for mild steel screw bolts (machine made) with hexagonal or square heads 5 to 20mm and neck 5 to 10cm long at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,
M & L for wind ties(30mmx3mm) for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
M & L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile stenght of 550 Mpa as in roof covering/claddiing to wall , fixed with self tapping screws as specefied.
M & L for Pre-painted galvalume based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described.
M & L for embeding Stainless steeenglish letters or figures in stone or brick wall with necessary fixing arrangement making surface in good condition with silicon after work . Letters embeded in wall shoud be projected from wall atleast 15cm and arrange in liner or curve manner in block. Roman, Italic or Indian n exc. 30 cm height and width not exc 5cm all as spd and directed by Engr-in-Charge
M and L for stops, commas, short lines, dashes, hyphens, brackets, etc of Stainless steel english letters or figures embeding in stone or brick wall with necessary fixing arrangement making surface in good condition with silicon after work . Letters embeded in wall shoud be projected from wall atleast 15cm and arrange in liner or curve manner in block. Roman, Italic or Indian n. exc. 30 cm height and width not exc 5cm all as spd and directed by Engr-in-Charge
E&M works
M & L point wiring with 1.5 Sqmm nominal cross sectional area, PVC insulated, FR unsheathed, 1100 volt grade, multistranded single core copper conductor and including PVC casing-capping minimum 25 mm wide with all fittings and accessories such as bends, Tees, Joints etc fixed to wall or ceiling and Recessed mild steel switch board of required size including bakelite sheet of 3 mm thick with chromium plated screws or rectangular PVC box closed recessed having 40 m depth ISI marked ISI No 14772 Make: Presto plastic for fixing of switch etc and provision of 1.5 sqmm nominal cross sectional area, PVC insulated, FR, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly, all metal parts, such as tube light fittings, fan hook, earth terminal of all socket points etc as specified and directed.
One light / Fan / Bell Point controlled by one way switch.
One 3 pin socket out let, 5 Amps on the same board with other switches, with cables 1.5 sqmm size
Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 4 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.
M & L for circuit/ sub main wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required , 4 Sqmm (3 run) sq.mm earth wire in PVC casing capping. Complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing round shape 12watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
M & L Modular switch 1 way 6 A, 1 module, complete all as specified and directed.
M & L Modular switch 1 way 16 A, 1 module complete all specified and directed.
M & L PVC rectangular block for mounting, switches, sockets fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm complete all as specified and directed.
S & F ceiling rose, surface bake lite, 65 mm x 50 mm, two to three terminals complete all as specified & directed.
M & L modular switch socket combination 2 in 1, 3 pin, 5 and 15 Amp 240 Volt flush type universal complete all as specified & directed.
M & L for Switch socket outlet 3 pin, 15 amp, flush type complete all as specified & directed.
M & L Switch socket outlet 3 pin 5 amp flush type complete all specified & directed
S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.
S & F amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
SP 5 To 32 AMP
SPN 32 AMP
S & F single pole & neutral 12 way Double door sheet metal enclosure for DB's when MCBs to be used complete all as specified and directed.
XLPE 4 core insulated armoured heavy dut electric cable with aluminum conductor, 1100 volts grade, cross-sectional area 6 Sqmm compelte all as specified and directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
M/S SWAPAN DEBNATH
SHRI RAJESH DEY
M/s Amrit Gope
M/S NIYATI NETWORK
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .