Hadaf Irrigation Project.

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and

are given to provide a common basis for bidding. The basis of payment will be the

actual quantities of work ordered and carried out, as measured by the Contractor

and verified by the Engineer and valued at the rates and prices tendered in the

priced Bill of Quantities, where applicable, and otherwise at such rates and prices

as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far

as it is otherwise provided under the Contract, include all constructional

plant, layout, supervision, materials, erection, maintenance, insurance, profit,

taxes and duties, together with all general risks, liabilities and obligations set out

or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed

to enter a rate or price shall be deemed to be covered by other rates and prices

entered in the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included

in the items provided in the priced Bill of Quantities, and where no Items

are provided the cost shall be deemed to be distributed among the rates and

prices entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates

or prices against each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications

for building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer,

required blasting, or the use of metal wedges and sledgehammers, or

the use of compressed air drilling for its removal, and which cannot be

extracted by ripping with a tractor of at least 150 kw with a single rear mounted

heavy duty ripper.

BILL OF QUANTITIES

Name of work : “Strengthening of all existing radial gate assly & Horizontal girders assemblies

etc..as per drawing, specifications & direction of Engineer-in-charge @ Hadaf Dam (size:49'x 35'-05

nos.) Dist:Panchmahal.”

(A)Percentage Rate Tender (Up to INR 50 Cr. )

m Item Description anti Unit Rate

1 Strengthening of all existing radial gate assly & 1 Job 914421.00

Horizontal girders assemblies by Providing,

Fabrication and erecting of (i)new extra

Vertical - "T" on downstream side of gate leaf

assembly (ii) additional new flange plate,

stiffeners & web plates on bottom &

intermediate horizontal girders Including cost

of materials, gas cutting, welding, machining,

labor, tools & tackles, scaffoldings,

transportation, painting etc.. as per drawing,

specification & direction of Engr. In charge for

Radial Gate (size :49' X 35'-05 nos.) of Hadaf

dam , Dist:Panchmahal

(All items rate are exclusive of GST)

I/We am/are willing to carry out the work at………………….% above/below

percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………% below Add……………….…% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge and as per GR No. MIS/102010/17(2)/k-1 of dtd. 29/01/2011 for which no extra

payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

5. The quoted rates should be inclusive of cost of minor rectification work which may have to be done for

correcting the distoration caused during transportation of the gate components.