Providing, Supplying, Installation, Testing And Commissioning of Submerged Centrifugal Pumping Machinery with Co-Ordinate Mechanical And Electrical Accessories in Ghoghariyo Kuwo at Talaja, Dist.: Bhavnagar Under 15 Percentage Vivekadhin Grant Year-2026-27

NAME OF WORK : PROVIDING, SUPPLYING, INSTALLATION, TESTING & COMMISSIONING OF SUBMERGED

CENTRIFUGAL PUMPING MACHINERY WITH CO-ORDINATE MECHANICAL & ELECTRICAL ACCESSORIES

LOCATION :- GHOGHARIYO KUWO, AT. Talaja

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing & Supply at Site, Storage of submerged centrifugal pump sets

(horizontal/vertical as required) (water immersed, dry air filled, class "F"

insulated TEWC motor integrally mounted on volute casing pump sets for

water duty, 3-phase, 50Hz ± 3%, 415V ± 10% along with suitable

foundation / installation device with cable length from pumps to panels &

of following Material of Construction: Impeller-CF8M, Casing-C.I. FG

Wearing Ring -SS, TC mechanical seal, CS/S.S. bearing, S.S shaft with

sleeve, SS strainer & MS motor body as per relevant IS and detailed

specification including installation of pumping mechinery Capacity 35 LPS

x 50.00 Mtr. Head with minimun prime mover 1450 RPM of 30 KW x

set (1W) = 30 KW Upto 30.00 KW

Installation, testing & commissioning for submerged centrifugal pump sets

(without material supply) For upto 30.00 KW 1.00 20948.00 Job

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of

M.S. 150mm Ø Delivery pipe line with Flanges, Concentric Nozzles Bolts,

Nuts and Pipe with Y-Tee Connection Flanges, Eccentric / concrentic

Nozzles etc. Complete as per relevent IS Standard 300.00 109.36 Kg

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of

M.S. 350mm Ø Common Header pipe line with Y-Tee Connection,

Flanges, Bolts, Nuts Piping etc. Complete as per relevent IS Standard &

requirement. 500.00 109.36 Kg

Supply at Site, Storage, Erection, Installation, Testing & commissioning of

M.S 100mm Ø By pass Pipings with Y-Tee Connection, Flanges, Bolts,

Nuts etc. Complete as per relevent IS Standard & requirement 150.00 109.36 Kg

Supply at site, storage, Erection, installation, testing & commissioning of

150mm Ø Both End Flanged Butterfly Valve as per IS 13095 with

sleeve of EPDM & disc, shaft & internal parts of SS-410, with ISI mark of

PN 1.6 Rating to be installed on Delivery Pipe complete as per

specifications & requirement. 1.00 4853.00 No.

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of

350mm Ø with Both End Flanged Butterfly Valve For Header PN

Rating and ISI mark of IS 13095 with sleeve of EPDM & disc, shaft &

internal parts od SS - 410 & with ISI Mark only as per technical

specification & requirement. 1.00 31331.00 No.

Supply at site, Storage, Erection, Installation, Testing & Commissioning of

Both End Flanged 100mm Ø C.I. Non Rising Spindle Type Sluice Valve

of PN 1.6 with hand / wheel cap opereted (pd type short body) Rating

etc. Complete (For Air valve on Header Pipings & Bypass piping) as

per relavant Std.& Specification With ISI Mark Only 1.00 4037.00 No.

Supply at site, Storage, Erection, Installation, Testing & commissioning of

DS 2 Type 100 mm Ø Double Acting Air Valve on Header Pipings as

per relavant Std. with Approved make etc. Complete as per Specification.

Supply at site, storage, Erection, installation, testing & commissioning of

150 mm Ø C.I. D/F reflux valve on Delivery pipe confirming to relevent

standard with PN 1.6 rating etc. Complete as per specifications. 1.00 8933.00 No.

Supply at site, Storage, Erection, Installation, Testing & commissioning of

350 mm Ø C.I. D/F reflux valve for Header pipe confirming to relavent

standard with PN 1.6 Rating of Approved make etc. Complete as per

Techanical Specification & requirement. 1.00 65376.00 No.

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of

flange ends Expansion Bellow as per EJMA standards of overall length

of minimum 300 mm, designed for 15 mm axial compression and 5 mm

axial extension with tie rods etc. of following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304;

Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS

/IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 for Common Delivery

Piping 150 mm Ø PN 1.6 (Width : 300mm) 1.00 4896.00 No

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of

flange ends Expansion Bellow as per EJMA standards of overall length

of minimum 300 mm, designed for 15 mm axial compression and 5 mm

axial extension with tie rods etc. of following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304;

Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS

/IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 for Header Piping 350 mm

Ø PN 1.6 (Width : 300mm)

Design, Supply, Installation, Testing, Commissioning of Bourdon Type

Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel,

SS316 L Bourdon Tube, SS 316 Movement material, Aluminium dial with

black graduation on white background, Micro Zero adjustable pointer,

neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as

per IS 3624. 100MM Dia (i) 0 to 10 kg/cm² (on Delivery Pipe) 1.00 1029.00 No.

Providing & Laying Reinforced Cement Concrete in Thrust Block /

Piping / Valves Supports etc. with TMT steel, Black Trap Kapchi as

Coarse Aggreate for Raft, Grillage Footing with Necessary Centering

Form work, Consolidating as per Directive in 1:2:4 Ratio comp. as per site

requriement 2.00 8566.40 M3

Manufacture, Supply at Site, Storage, Erection, Installation of M.S.

specials flanged ends with labour charges for lowering laying, erecting,

fixing, various size of M.S. section such as joints channel, angles, plates,

specials etc. complete with fabrication For Tee, Bend, Reducer, Flange

S.I.T.C. of LV MCC Panel totally enclosed, dust & bermin proof, indoor

type, minimum degree of protection - IP 52 as per IS: 2147, operation on 3-

Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with

instrumentation compartments accomodating LED type indicating lamps,

control contactors as per IS: 13947, CT of accuracy class- I as per IS:

2705, relays, meters & control MCBs, air insulated electrolitic grade

Aluminum busbar for three phase & neutral system with incomming

breaker- microprocessor based Air Circuit Breakers (electrically operated

drawout type)/ air break fixed type MCCB with trip free mechanism,

current limiting type as per IS: 8828, Motor Contractor (as per type -2

coordination), Overload Relay with built-in single phasing prevention

feature & auxiliary feeders as per SLD drawings, momentary contact type

push buttons, equipment fittings, bus bars, cable boxes, cable gland,

incoming & ougoing cable connection for 1100V grade, Aluminium/

Copper conductor XLPE/ PVC insulated & PVC sheathed armoured cable,

10% spare terminals,

Power wiring using 1100V grade, FRLS insulated copper conductor wires

conforming to IS: 694 & 8130, cable compartments/ alleys of minimum

300mm size, GI earth bus bar for entire length. MCC shall be fabricated

from cold rolled, coled annealed (CRCA) sheet steel & minimum thickness

of various members shall be as follows: Base Frame/ Channel/ Gland

Plate - 3 mm, Load Bearing Members/ Doors - 2 mm and Internal

Partitions - 1.6 mm. Auto Transformer Starter with MCCB, Contactor,

O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP,

Timer etc. 30 KW = (1 working feeder) [Size 700mm(w) x 450mm(d) x

Supply, laying, testing & commissioning of 1.1 kV grade, XLPE insulated,

stranded Copper conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid

on wall surface with necessary clamps / in existing cable trench / cable

trays / conduit / pipe sleeves at road crossing or floor as per site

requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) etc.

comp. with required accessories.

Size 1x3 Corex25 Sq.mm. (From Main Supply) 50.00 534.00 Mtr

Size 1x3 Corex16 Sq.mm. (Panel Board to Motar) 80.00 324.00 Mtr

Supply, Installation, Fabrication, Testing and commissioning of GI

perforated type cable trays with returned edge / flange, fabricated from

mm thk sheet steel in the standard length of 2.5 mtrs, duly hot dipped

galvanized after fabrication as per IS 2629-1989 / IS 4759-1984 including

accessories such as coupler plates/ fish plates, bends, tees, reducers,

elbows, covers and electro-galvanized hardware etc, erected on existing

support as per specification and instruction of engineer in charge

Size : 300mm(W) x 50mm(H) x 2mm thick 25.00 541.00 Mtr

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to submit

test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. [A] For electrical installation

up to 440 V Length of Pipe - 1.00 Mtr Back filling compound - 1 Nos.

of Bag of 15 Kgs. 1.00 4546.00 Each

Total Amounts Rs..……

Total Amounts Rs..……

I/We am/are willing to carry out the work @ ______% Above / Below___________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 7,98,223=00 Put to Tender Rs. 7,98,223=00

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Talaja Nagarpalika

Chief Officer President

Talaja Nagarpalika Talaja Nagarpalika