Repair/ replacement of internal electrification at Birpur and Ghungora Road under AGE E/M-II of GE Dehradun.

Amount

Material and labour for concealed point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit with medium duty 20mm dia or higher size PVC conduit complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulaor, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 1 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Description all as per Item No 1 mentioned here-in- before but cable drawn through existing concealed conduit for the followings:

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulator,complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 2 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC concealed conduit 20mm dia or higher size complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.6 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulaor, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 3 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Description as per Item No 3 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 4.0 sq mm PVC insulated FRLS copper conductor and 4.0 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Material and labour for sub main wiring using approved colour coding as per IS, with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC concealed conduit and conduit accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE: (i) Three run of single core PVC cable, and one run of PVC conduit shall be measured as one unit length. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs)

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed.

Material and labour for sub main wiring using approved colour coding as per IS, with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE:- Three run of single core PVC cable shall be measured as one unit length.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fix switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.

Supply and fix socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

Supply and fix bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fix Modular switch single pole one way 6 Amp complete all as specified and directed.

Supply and fix Modular switch single pole one way 16 Amp complete all as specified and directed.

Supply and fix Modular socket outlet 2/3 pin combined 6 Amp 240 volts complete all as specified and directed.

Supply and fix Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all as specified and directed.

Supply and fix Modular bell push flush type, 5 Amps complete all as specified and directed.

Supply and fix calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fix stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 18 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Cat part No HLDLR-R06-18-CW in Halonix or equivalent.

Supply and fixing LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified and directed.

Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including making connections with suitable size of lugs/thimbles/glands and making good the disturbed surface matching with existing surface including taking down existing unserviciable MCB/DBs including MCBs complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make.

Supply and fix distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming including making connections with suitable size of lugs/thimbles/glands and making good the disturbed surface matching with existing surface including taking down existing unserviciable MCCB/DBs including MCBs complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make.

Supply and fix MCB single pole and neutral 240 volt 10 KA 40 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB single pole and neutral 240 volt 10 KA 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB TPN 415 volt 10 KA 63 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Material and labour in replacement for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00mm dia by means of bolts, nuts, Check nuts and washers of galvanised iron and thimbles and other end of the earth wire all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board and protected by galvanized iron pipe medium 15 mm bore, and water pipe 20 mm bore GI light grade with funnel and wire mesh, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 50mm thick cover, reinforced with 8mm dia deformed or TMT bars 100mm C/C both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Material and labour for laying, jointing and testing in replacement underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes: (a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately. (b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses. (c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.

10.0 Sqmm, 4 core, complete all as specified and directed.

16.0 Sqmm, 4 core, complete all as specified and directed.

25.0 Sqmm, 4 core, complete all as specified and directed.

Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etc and getting out complete all as specified and directed.

Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed.

Material & labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed.

Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply & Laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as directed.

Attending internal Electric complaint in the blocks/lines/offices at BIRPUR & GHANGHORA due to any reason like no supply, any fualt/complaints rectifications with supply & replacement of the following electric stores as mentioned in item No 39 to 123 here in after by trained person complete all as specified and directed. Notes :- (a) This item shall be measured and paid only when store requirement for attending and resolving the complaint is NIL (b) Incase, stores are required to attend and resolve the complaint, this item will not be measured and payment to the contractor shall be done under relevant items from 39 to 123. (c) All T&P and safety tools required to above job are included in the unit rate. (d) Unit rates also include the conveyance and communication faicility is requried the complete the job. (e) The complaint register,complaint slips for each area/zone ,materials issue register for each complaint slips will be maintain by the contractor or rep/supervisor and daily produced all documrnts to the JE/MCM / AGE E/M (f) Materials will provided by the contractor through this contract & neccessary unserviceable or replaced items/unused items deposited back to complaint cell. unserviceable/ replaced items will be credited in the Sch of credit items.

Supply and fixing wall mounted LED tube light fitting 1x20 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed.

Supply and fixing wall mounted LED tube light fitting 1x10 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed.

Supply and fixing LED building security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete voltage surge protection of 4kv & with 3 core 1.5 sqmm PVC insulated cable complete including taking out old u/s fitting complete all as specified and directed.

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking out old u/s fitting complete all as specified and directed.

Supply and fix round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 18 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete including taking out old u/s fitting complete all as specified and directed.

Supply and fix in repair surface mouting PVC gang box of super quality for one switches with two /four holes complete all as specified and directed.

Supply and fix in repair surface mouting PVC gang box of super quality for three switches with two /four holes complete all as specified and directed.

Supply and fix in repair surface mouting PVC gang box of super quality for five to seven switches with two /four holes complete all as specified and directed.

Supply and fix in repair surface mouting PVC gang box of super quality for eight to twelve switches with two /four holes complete all as specified and directed.

Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 9 x 6inch complete all as specified and directed.

Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 5 x 5 inch complete all as specified and directed.

Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 8 x 5 inch complete all as specified and directed.

Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 9x 11 inch complete all as specified and directed.

Supply and fix in repair Plug Top, 3Pin, 5A with indicator ISI Marked complete all as specified and directed.

Supply and fix in repair Plug Top, 3Pin,15 A with indicator, ISI Marked complete all as specified and directed.

Supply and fix in repair Casing & caping 25mm width, ISI Mark complete all as specified and directed.

Supply and fix in repair PVC insulated & unshethed copper multisranded FRLSH cable of size 1.5 sqmm complete all as specified and directed.

Supply and fix in repair PVC insulated & unshethed copper multisranded FRLS cable of size 2.5 sqmm complete all as specified and directed.

Supply and fix in repair PVC insulated & unshethed copper multisranded FRLS cable of size 4.0 sqmm complete all as specified and directed.

Supply and fix in repair PVC insulated & unshethed copper multisranded FRLS cable of size 6.0 sqmm complete all as specified and directed.

Supply and fix in repair 5 -in-1, 6 Amp, 240V, switch socket combined unit with box (surface type) with two fixing holes incl fixing rawal plug & screws complete all as specified and directed.

Supply and fix in repair 5 -in-1, 6/16 Amp, 240V, switch socket combined unit with box (surface type) with four fixing holes incl fixing rawal plug & screws complete all as specified and directed.

Supply and fix in repair modular metal flush box of thickness 1.0 mm suitable for 12 modules 2 row complete all as specified and directed.

Supply and fix in repair modular metal flush box of thickness 1.0 mm suitable for 8 modules 2 row including making good the disturbed surface complete all as specified and directed.

Supply and fix in repair modular metal flush box of thickness 1.0 mm suitable for 6 modules including making good the disturbed surface complete all as specified and directed.

Supply and fix in repair modular metal flush box of thickness 1.0 mm suitable for 3 modules including making good the disturbed surface complete all as specified and directed.

Supply and fix in repair modular metal flush box of thickness 1.0 mm suitable for 2/1 modules including making good the disturbed surface complete all as specified and directed.

Supply and fix in repair decorative polycarbonate modular white frame for fixing of switches and cover plate suitable for 12 modules 3 row and blanking plate if any required for spare module.as per site requirement complete all as specified and directed.

Description all as per item No 65 above but 8 module single or double row as per site requirement complete all as specified and directed.

Description all as per item No 65 above but 6 module complete all as specified and directed.

Description all as per item No 65 above but 3 module completeas per site requirement complete all as specified and directed.

Description all as per item No 65 above but 1 or 2 module complete as per site requirement complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 06 amp single pole as per site requirement complete all as specified and directed.

Supply and fix in repair Modular switch 2 way 06 amp single pole. as per site requirement complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 16 amp single pole as per site requirement complete all as specified and directed.

Supply and fix in repair Modular socket outlet 6/16A- 5 pin combined of 02 module as per site requirement complete all as specified and directed.

Supply and fix in repair modular socket outlet 6A-5 pin combined of 02 module as per site requirement complete all as specified and directed.

Supply and fix in repair moduar bell push 6 Amp 1 module complete all as specified and directed.

Supply and fix in repair modular fan step regulator 120 W-2 module as per site requirement complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair socket outlet 3 pin, 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fix in repair bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fix in repair Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified and directed.

Supply and fix in repair Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified and directed.

Supply and fix in repair calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix in repair ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix in repair GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete incl taking out old u/s fitting complete all as specified and directed.

Supply and fix in repair flood light, 50 W, Outdoor type with high power LED's as light sources energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W, Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection incl taking out old u/s fitting complete all as specified and directed.

Supply and fix in repair flood light, 80 W, Outdoor type with high power LED's as light sources energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W, Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete incl taking out old u/s fitting complete all as specified.and directed.

Supply and fix in repair flood light, 120 W, Outdoor type with high power LED's as light sources energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W, Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete incl taking out old u/s fitting complete all as specified.and directed.

Supply and fix in repair energy saving, surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed.

Supply and fix in repair decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, including suitable type of 9/15 Watts LED Lamp complete all as specified and directed.

Supply and fix in repair Distribution box MCB Protected socket with Plastic enclosure (Surface mounting) 20 Amp MCB DBOXX Combo DP including Plug top complete all as specified and directed.

Supply and fixing in repair Distribution board Vertical type TPN 4 Way double door,IP -43protection suitable for MCCB 100 to160 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process incl taking out old u/s DB acomplete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make and paid separetaly

Supply and fix in repair Distribution board SPN 4 Way double door,IP-43 protection for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. incl taking out old u/s DB complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make.

Supply and fix in repair MCCB 415 Volt, 16 KA, 4 pole 63 Amp thermal magnetic type 1CS=100% ICS complete all as specified and directed.

Supply and fix in repair MCB, single pole 240 Volt, C curve 10 KA ISI Marked 5 to 32 Amps complete all as specified and directed.

Supply and fix in repair MCB, SPN, 240 Volt, C curve 10 KA ISI Marked, 20-32 Amps in existing DBs complete all as specified and directed.

Supply and fix in repair MCB , TPN, 415 Volt, C curve 10 KA ISI Marked, 63Amps complete all as specified and directed.

Disconnecting electric connection and taking down of ceiling fan / Exhaust fan removing capacitor,split pins of any sweep ceiling fan / Exhaust fans complete carefully for overhauling checking of bearings/bush, cleaning the fan blades with cleaning solution, replacing the unserviceable bearing, bush, capacitor , safety split pin and nuts, bolts, washer etc duly threaded of down rods (bush, bearing, capacitor, down rod, hanging clamps, will be paid under relevant item of the Sch 'A') reassembling the ceiling fan complete after greasing/servicing, oiling testing the same making the fan in serviceable condition ana refixing/ hanging the same complete all as specified and directed by Engineer-in-Charge . Note 1: Cost of Split pins, nut bolts and threading of down rod pipe rates are included in quoted rate

Supply and fix in repair standard ball bearing (No.6201 - 6202, & No.6203) suitable size of ceiling fans 1200/1400 mm sweep to suitable for different make of fans of approved quality including necessary greasing complete all as specified and directed.

Supply and fix in repair gun metal Bush suitable for ceiling fans /exhaust fan, cabin fan of any make any size complete all as specified and directed.

Supply and fix in replacement of old unsv armature shaft for ceiling fans of any make complete all as specified and directed.

Supply and fix in replacement rubber bushes and real type synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans complete all as specified and directed. .

Supply and fix in repair complete set MS clamp with nut, bolt, including washers, split pins and rubber real etc of appropriate size for hanging of ceiling fan complete all as specified and directed. .

Supply and fix in replacement split pins of galvanised iron 1/8" dia 2" long complete all as specified and directed.

Supply and fix in repair body screw and blade screw of ceiling fan off size complete all as specified and directed.

Supply and fix in repair nut bolts & washers of appropriate size for hanging of ceiling fan complete all as specified and directed. .

Supply and fix in repair fan hook split type fabricated out of 12mm dia steel bar of length 30cm duly painted with rod oxide old black paint complete all as specified and directed.

Supply and fix in replacement capacitor 2.5 MFD, 230 volts single phase incl necessary connection complete all as specified and directed. Make :- Asain//Usha/Baja/Havells.

Description all as per item No 112 above but 3.15 MFD complete all as specified and directed.

DescriptionAll as per item No 112 above but 4 MFD complete all as specified and directed.

Dismantling electric and water connection of the 25/50 ltr's geyser, taking down from its original position on ground, dismantling geyser complete such as removing tank from its outer body, removing apparatus plate from the tank, descaling the geyser inner tank and apparatus plate complete, testing its thermostat, heating element, and tank from leakage, reassembling the geyser, replacement of unserviceable parts such as heating element, rubber gasket & testing the geyser and installation of the geyser into its original position and connecting all electric and water supply connection complete and testing on completion all as directed by Engineer-in-Charge. (Heating element & Aparatus if require to be replaced shall be measured and paid separately) (Nut, bolts and hold fastners if require to be replaced shall be deemed to be included in the quoted rates of this item). Note: All repair shall be carried out on complaint basis and measurement will be made only once through out the contract period irrespective number of repair carried out in same Geyser. All repairs shall be carried out on complaint basis contractor shall be delay to the maintenance and collect complaint slip from concerned JE daily upto 11.00 Hrs

Supply and Fixing in repair heating element any type/size as per site requirement of capacity 2 KW ISI Marked complete all as specified and directed

Supply and Fixing in repair thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed.

Supply and fix in replacement of water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot/ cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long complete all as specified and directed.

Supply and fixing in replair syphon assembly for geyser any type of hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed.

Supply and fixing in repair pressure release valve as per existing make and size geyser spring loaded 15 mm dia complete all as specified and directed.

Supply and fixing in repair rubber Gasket as per existing make/size site requirement suitable for 25/50 Ltr capacity geyser complete all as specified and directed.

Supply and fix in replacement BLDC CEILING FAN complete with electronic regulator and accessories 230 volts ac single phase,50 HZ,,1200 mm sweep BEE 5 STAR RATING incl connection upto ceiling rose & taking out old u/s fan complete ,deposited to MES STORE YARD, complete all as specified and directed.

Supply and fix in replacement Vertical type water heater storage of 25 Ltrs capa 230 volts ac single phase,50 HZ,,1200 mm sweep BEE 5 STAR RATING , 3 level safety ,capillary,thermostate,automatic thermal cutout & multifunctional wall to provide higher safety, 5 star rated incl testing & taking out old & deposited to MES STORE YARD, complete all as specified and directed.

NOTE:- Amount of credit of Rs. 129259.00 for retrieved materials is mentioned in Schedule of Credit Page No 29 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S Durvish Mourya (BID ID -3422091)

M/s Devki Nandan Enterprises (BID ID -3418962)

bharat contrectors (BID ID -3419131)

m/s parmod kamar (BID ID -3422054)

R N Enterprises (BID ID -3422013)

Ansh Enterprises (BID ID -3420853)

Nirmal Enterprise (BID ID -3422821)