CA NO CWE BLY/GE(E)/67 OF 2020-21 PROVN OF HAY BAILED SHED, CLIPPING SHED AND 10 X WC TOILET BLOCK UNDER GE (EAST) BAREILLY

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing excavated soil to distance n.exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M25 Design mix as in foundations, inclduing raft, footing, foundation beam, under ramed piles and mass concrete complete all as specified and directed.

M&L for RCC M25 Design mix as in beams, lintel beams over 1.50 meter span,cantilevers, bressummers etc complete all as specified and directed.

M&L for RCC M25 Design mix as in chajjas omplete all as specified and directed.

M&L for RCC M25 Design mix as in columns, piers, posts etc complete all as specified and directed.

M&L for RCC M25 Design mix as in slab supported on walls, beams and columns in floor, roof, landing, balconies etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders , cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc. 200 mm thick curved (horizontal or sloping ) work in rough finished flat surfaces of concrete complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

S&F form work to sides chulla hoods,chajjas,troughs and similar items including edges complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings,girders, ressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window ills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC prelam colour door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Steel ventilators, bottom portion fixed type glazing, and top portion with top hung wire gauge shutter dovetailed or welded complete all as specified and directed.

S&F Alum handles,cast type,anodised 150mm size complete all as specified and directed.

S&F for ISI marked 150mm long aluminium alloy, anodized,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 200mm long extruded Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Sheet glass 3mm thick,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall and chajja, fixed with self tapping screws complete all as specified and directed.

M&L Hard core of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M& L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed

M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed

M & L 25 mm thick PCC (1:2:4) type B1(20 mm graded aggregate) as in floor rough finished to receive top layer complete all as specified and directed..

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed

M&L Screed bed or bedding layer 20mm thick in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and as directed

M&L Screed bed or bedding layer 20mm thick in CM 1:6 for laying glazed tiles in floors etc. complete all as specified and as directed

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M & L 7 to 8 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to get mirror finish and all as specified and directed.

M&L Kota stone slab 20-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to get mirror finish.

M&L for 75 mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate as in plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

supply Integral water proofing Liquid of Dr fixit/sika/Fosroc

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed (Note : Water proofing liquid shall be measured and paid separately)

S&F for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed .

S&F vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.

S&F vitreous China coloured European type WC with "P" or "S" trap white including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etcplastic water seat white/black pattern flat bottom and cover and mild stel chroumium plated. complete all as specified..

S&F PVC low level flushing cistern 10 ltrs cap white / coloured incl internal fittings brackets clamp and 32mm dia PVC flush pipe complete all as specified and directed incl taking down low level cistern complete

S & F for 15 mm bore fancy type chromium plated Bib taps with wall flange cast copper alloy with capstan head sc-rewed down screwed for iron pipe or for brass ferrule and fixed, `Fixed as in Repairs` complete all as specified and as directed .

S & F for angle cock cast copper alloy CP wall flange screwed down high pressure with capstan head fancy type chromium plated (Bore dia of pipe in 15mm)

S&F PVC pipe connection 450mm long 6kg /sqcm pressure rating with flare nuts on both ends suitable for 15mm dia pipe complete all as spd and directed

S&F 75mm bore cast iron nahani trap, with grating incl jointing to waste pipe fixed in Cement concrete 1:2;4 type B1 complete all as specified and as directed .

M&L for PVC ( SWR ) Gully trap 125/110 mm , with grating incl jointing to waste pipe fixed in Cement concrete 1:2;4 type B1 complete all as specified and as directed .

S&F ball valves,high pressure of PTMT of 15 mm dia with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Min weight 15 mm dia 142 gms)

S&F Rotational moulded polythelene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F Ball brass valves 20mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work on concrete internal surfacs in CM (1:6) and finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work on concrete surfacs in CM (1:4) on external brick / concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfacs in CM (1:3) on ceiling surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat over 1mm thick cement based wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for sand filling under floors or in foundation, including watering and consolidation complete all as specified and as directed.

M&L for cement Concrete coloured interlocking paver blocks factory made with casting in rubber/PVC moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed.

M& L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

M&L for precast machine pressesd glazed rubber moulded PCC (1:2:4) type B0 using 12.5 mm graded aggregrate for machine pressesd precast cement concrete kerb stone 300x150x450mm including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone as directed.

M&L 20-22 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill , in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed

M&L for concrete bed to drain pipes in cement concrete 1:3:6 type C-2 including packing under and haunching against the sides of pipes after they are laid and tested bore of pipe 150 mm complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate) as in concrete bed to drain pipe for 100mm bore including packing under and haunching against the sides of pipes after laid and tested complete all as specified and directed.

M&L for providing cement concrete type B-1 1:2:4 (using 20mm graded aggregate) as in copings/benching including necessary form work etc complete all as specified and directed.

M&L for 150mm bore RCC pipe Class NP2, laid in trenches and jointed complete all as specified and directed.

M&L for 100mm bore RCC pipe Class NP2, laid in trenches and jointed complete all as specified and directed.

M&L for providing re-inforced cement concrete (nominal mix) type B1 (1:2:4) (using 20mm graded stone aggregate) slabs supported on walls, beams complete all as specified and directed.

M&L for septic tank 25 users with brick masonry wall, PCC in foundation, floor, RCC cover slab including sludge chamber, CI vent pipe, CI cowl, inlet and outlet pipe , RCC baffle wall and all necessary excavation and earth work complete all as specified, shown in drawings No. TD/217 sheet No 1/7 to 7/7 and as directed.

M&L for soakage well of size 3.0M dia and 4.50M deep in ordinary soil with foundation in PCC 1:3:6, brick masonry in cement mortar 1:4, RCC in M25 (design mix) filtration material consisting of brick bats, complete all as specified, shown in drawings No TD/309 sheet 1/4 to 3/4 and as directed.

S&F mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as spd as directed

M&L for Pre- painted galvolume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick coloured having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 12mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid with and including anodised aluminium snap grid frame work for false ceiling with 6mm dia GI hangers up to 1200mm length with adjusting level completed all as specified as directed

S&F stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all neccesary fittings all as specified and directed

S&F steel windows with side hung shutters including box type hinges with 2Nos MS 100mm size tower bolt over MS flat iron for each openable leaf, Z section steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat of red oxide zink chromate primer complete all as specified and directed.(wire cloth shall be measured and paid separatly)

S&F steel windows with side hung shutters including box type hinges with 2Nos MS 100mm size tower bolt over MS flat iron for each openable leaf, Z section steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of red oxide zink chromate primer complete all as specified and directed.(Glass panes shall be measured and paid separatly)

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed . (Note :- Glass shall be measured and paid for separately).

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F 375 mm long mild steel sliding door bolts plate type with bright bolt not less than 20 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing FE 290 Gde E-165 complete all as spd as directed

S & F 1.25 mm thick Mild steel, plain black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete including cutting out of existing sheet if required all as spd as directed

E/M Part:- M&L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.0 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/bell point controlled by one switch/bell push complete all as specified and directed.

All as per item No 98 here-in-before but for 3 pin 5 Amps socket outlet point controlled by one switch on same board

All as per item No 98 here-in-before but for 3 pin 5 Amps socket outlet point controlled by one switch on independent board

All as per item No 98 here-in-before but 2.5 Sqmm PVC insulated seathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket out let 15Amp.

S&F switch piano flush type polycarbonate 5 A single pole one way complete all as specified and directed.

S&F switch piano flush type polycarbonate 15 A single pole one way complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin Amps 5 pin multipurpose flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3/5 pin 5/15 Amp multipurpose flush type complete all as specified and directed.

S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F lamp LED lamp 9 watt, 230 volt complete all as specified and directed.

S&F of ceiling rose PVC polycarbonate, isolated body, 3 terminals AC 230 volt complete all as specified and directed.

S&F ultra slim LED MS batten light fitting, 1 x 20 watt powder coated decorative end cap complete with retrofit poly carbonate glass tube 4' long including electric connection with three core flexible PVC insulated copper conductor multistranded cable of 1.0 sqmm from ceiling rose to batten complete all as specified and directed.

S&F security light fitting, LED type, 25 watt, IP-65 pressure die cast housing with prismatic polycarbonate diffuser & individual LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 2 m long bend including nut, bolts and 2 Nos GI clamps of size 50 x 6 mm as required and making connection with three core 1 sqmm copper conductor cable complete all as specified and directed.

S&F of exhaust fan 250 mm sweep, PVC body, AC 230 volts with louvres including making suitable size hole in the wall for air flow and grouting of nuts, bolts and washers including electric connection with three core flexible PVC insulated copper conductor multistranded cable of 1.0 sqmm from ceiling rose complete all as specified and directed.

S&F ceiling fan 1200mm sweep complete with all accessories such as rubber reel, split pins, check nuts, fan blades, PVC conopy, fan clamps, capacitor, PVC connector etc. and suitable electric connection with three core flexible PVC in sulated copper conductor (multistranded) cable of 1.0 Sqmm from ceiling rose to fan complete all as specified and directed.

S&F stepped type electronic fan regulator flush mounting type, 180Watt, 230Volt complete all as specified and directed.

S&F sheet metal enclouser DBs when MCBs to be used 8 way double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F sheet metal enclouser DBs when MCBs to be used 4 way double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F MCB SPN 32A to 40A, 230V, 10kA, B curve complete all as specified and directed.

S&F MCB SPN 16A to 32A, 230V, 10kA, B curve complete all as specified and directed.

S&F MCB SP 6A to 32A, 230V, 10kA, B curve complete all as specified and directed.

S&F MCB SP 6A to 16A, 230V, 10kA, B curve complete all as specified and directed.

Supply and laying bricks old size, well burnt sub class 'B' bricks as in protection cover over under ground cable laid flat across the cable adjoining each other, laid dry complete all as specified and directed.

M&L sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top ebdge of cable after laying and punning up to 18 cm depth complete all as specified and directed.

Boring holes under road or cutting the road /pavement /hard standing or any other situation by mannual or other means for inserting 25mm bore GI pipe for crossing the cable and making good both the end complete all as specified and directed.

S&F of galvanized iron pipe of 25 mm bore Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

Supply, lay jointing testing and commisioning XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm 2 core complete all as specified and directed.

Supply, lay jointing testing and commisioning XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 6 Sqmm 2 core complete all as specified and directed.

S&F sheet metal enclouser DBs when MCBs to be used 2 way single door single pole & neutral without bus bar complete all as specified and directed.

S&F MCB SPN 32A to 63A, 230V, 10kA, B curve complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work complete as specified or indicated including testng on completion complete all as specified and directed.

M&L for cutting steel water tubing and inserting with and including GI Tee, union, elbow fittings etc upto 50 mm dia complete for alteration or addition water pipe connection complete all as specified and directed.

Supplying & laying GI pipe 25 mm bore medium grade with all fittings in trenches complete all as specified and directed.

Supplying & laying GI pipe 20 mm bore medium grade with all fittings in trenches complete all as specified and directed.

S&F 25mm bore gun metal globe or gate valve with iron wheel head high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valve with iron wheel head high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Vasundhra Enterprises

M/S Gupta Builders

SANJEEV KUMAR CONTRACTROR

M/S ABHISHEK ENTERPRISES

UTTRAKHAND BUILDERS

khanna construction

Builders Harpal

j u enterprises