Repair to New Jagannath Sadak road from ch.0/00 to 0/035 (such as embankment rising), ch.4/00 to 5/00km (such as providing paver block layer in patches) and laying mastic over bridge areas for the year 2026-27

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material upto 1000m lead including cost of all labour, machinery etc complete per Technical Specifications and Clause 305.4.3 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Excavation for road work / foundation of CD & structure in soil with hydraulic excavator including cutting, trimming bottom & side slopes and transporting to the embankment locations upto 1000m lead with cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 301 & 304 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing laying spreading and compacting graded stone aggreegate to Wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed materials by tipper to site laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H specifications for road and Bridge work

Providing primer coat with bitumen emulsion on prepared granular surface spreading @ 0.60Kg/sqm using mechanical means including cost conveyance of bitumen emulsion & cost of all labour machinery etc complete as & cost of all labour as per technical specification and clause 501 & 502 of MoSRT&H Specification for road and bridge work

Providing Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing Tack coat with bitumen emulsion on prepared bituminous surface, spreading @ 0.20kg / sqm using mechanical means including cost, conveyance of bitumen emulsion & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in Table 500-29, prepared by using mastic cooker and laid to required level and slope after cooking the surface,including providing anti-skid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and an approximate spacing of 10 cm center to center in both directio, pressed into surface when the temperature of surfaces is not less than 100° C ,protruding 1 mm to 4 mm over mastic surface including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per Clause 516 of MoRT&H Specifications for Road & Bridge works (5th Revision).use 515. ARP 186 item no.54