Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95,811.01Accepted-AOC | ₹95,811.01 | L1 | Accepted-AOC L1 |
| 2 | L2₹1.0 LRejected-AOC | ₹1.0 L | L2 | Rejected-AOC L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical only cement |
| Sl No | Description | Qty | Unit | VINODH L3 | CHANDRAN C L2 | Malabar Cements Limited L1 |
|---|---|---|---|---|---|---|
| 1.00 | Stone for masonry work | 1 | cum | 1,653.75 ₹1,653.75 | 1,575 ₹1,575 Lowest | - |
| 2.00 | Portland Cement | 1 | tonne | 12,096 ₹12,096 | 11,520 ₹11,520 | 9,000 ₹9,000 Lowest |
| 3.00 | Coarse sand (zone III) | 1 | cum | 2,728.69 ₹2,728.69 | 2,598.75 ₹2,598.75 Lowest | - |
| 4.00 | Stone Aggregate(single size): 40 mm nominal size | 1 | cum | 2,205 ₹2,205 | 2,100 ₹2,100 Lowest | - |
| 5.00 | Stone Aggregate(single size):20 mm nominal size | 1 | cum | 2,053.96 ₹2,053.96 | 1,956.15 ₹1,956.15 Lowest | - |
| 6.00 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper | 1 | Day | 2,415 ₹2,415 | 2,300 ₹2,300 Lowest | - |
| 7.00 | Vibrator (Needle type 40 mm) | 1 | Day | 945 ₹945 | 900 ₹900 Lowest | - |
| 8.00 | Stone aggregate 10 mm nominal size | 1 | cum | 2,175.23 ₹2,175.23 | 2,071.65 ₹2,071.65 Lowest | - |
| 9.00 | Structural steel such as tees, angles, channels and R.S. joists | 1 | quintal | 8,796.9 ₹8,796.9 | 8,378 ₹8,378 Lowest | - |
| 10.00 | Red oxide Zinc chromate primer | 1 | Litre | 198.24 ₹198.24 | 188.8 ₹188.8 Lowest | - |
Tender Value
₹1 Cr
EMD Value
₹50,000
Closing Date
10 Jan 2025, 6:00 pmClosed
Secretary
Vadakarapathy GP, Nallur, Kozhippara, Palakkad
Re-tender of MGNREGS Material Supply
2024_DP_717022_3
SC3-3/2024
Open Tender
Civil Works - Others
Item Rate
180 days
Vadakarapathy GP
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,950
Yes
₹50,000
Yes
4 Aug 2026
3 Jan 2025
13 Jan 2025
3 Jan 2025
10 Jan 2025
3 Jan 2025
Amount
Stone for masonry work
Portland Cement
Coarse sand (zone III)
Stone Aggregate(single size): 40 mm nominal size
Stone Aggregate(single size):20 mm nominal size
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Stone aggregate 10 mm nominal size
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable telescopic prop 3m
Beam clamp 300-380mm
Twisted steel/deformed bars
Hollow blocks of size 40x20x20cm
Adjustable span ESO+SI(2.35-3.4)
Fine sand (zone IV)
Mild steel tubes hot finished wiled type
Welding by electric plant
Vitreous China orrisa type w.c. pan size 580 mm
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm
Plastic emulsion paint
Synthetic enamel paint in black or chocolate shade
C.I. bracket for wash basin and sinks
Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Ceramic Glazed Tiles ist 300x300 mm in all shades and designs of white, Ivory,grey, Fume Red brown etc.
Vitreous china flat back wash basin 630x450 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
Mild steel round bar 12 mm dia and below
Mild steel tubes electric resistant or induction butt welded
Flats up to 10mm in thickness
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
GI traford profile sheet 0.35 mm thick
Bitumen washer
GI Limpet washer
Galvanised steel J or L hooks 8 mm dia
Galvanised steel bolts & nuts 6mm dia and 25 mm long round head with slots
PVC pipe 63 mm outer dia 4kgf/cm2
PVC pipe 40 mm outer dia 10Kgf/cm2
PVC pipe 75 mm outer dia 6Kgf/cm3
PVC pipe 110 mm outer dia. 6kgf/cm2
PVC bend 110 mm dia
PVC bend 63 mm dia
PVC Elbow 75 mm dia
PVC end cap 75 mm dia
PVC end cap 110 mm dia
Mild steel plates
G.I pipes 40mm dia
Mild steel round bar above 12 mm dia
Solid blocks of size 30x20x15cm
Galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm
Wire nails
G I Plain easher thick
Precoated aluminium traford sheet 0.45mm thick
Safeda ballies 125 mm diameter
Second class kail wood in planks
Second class kail wood in scantling
wall form panel 1250*500 mm
Corner angle 45*45*5 mm 1.50 m long
100 mm channel shoulder 2.5 m long
Double clip (bridge clip)
Single clip
M.S. Tube 40 mm dia
Quarry waste
Precoated galvanised steel plain ridge
Stainless steel screws 50 mm
CHANDRAN C (BID ID -2055747)
VINODH (BID ID -2055750)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].