Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹49.8 L
EMD Value
₹1 L
Closing Date
7 Sept 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
O/o EE Bhawarna Division HPPWD Bhawarna
O/o EE Bhawarna Division HPPWD Bhawarna
Repair alongwith addition and alteration to HPPWD Inspection Hut at Bhawarna Tehsil Palampur Distt. Kangra.
2022_PWD_64269_1
NIT No.11240-99 DT.26-08-2022-Bhawarna
Open Tender
Civil Works - Buildings
Item Rate
365 days
Bhawarna
Please refer Tender documents.
11 documents required · 11 mandatory
₹2,000
₹1 L
1 Dec 2022
31 Aug 2022
7 Sept 2022
31 Aug 2022
7 Sept 2022
31 Aug 2022
Amount
Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeters) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. The Rate is inclusive of royalty, malkana, toll tax, GST and other taxes imposed by the government.
Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etcetra including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floor including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and laying cement concrete grade M-25 (M-Twenty five) design mix with minimum compressive strength 25N/mm2 ( twenty five newton per millimetre square )with cement contents not less than 360 Kg (Three hundred sixty kilogram) per Cubic metre mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding the cost of form work and reinforcement for reinforcement cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto any floor level including carriage of materials with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and laying tor steel of TataTISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and laying Damp Proof Course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 12.5mm nominal size) mechanically mixed including cost of form work and curing complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sales tax or other taxes imposed by the Government.
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg (One decimal seven killogramme) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as required at site as per H.P.P.W.D. specification, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sales tax or other taxes imposed by the Government.
Second class brick work using common burnt clay building F.P.S. (non modular) bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor levels as per PWD specification, drawing and design and curing complete including scaffolding and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Second class half brick work using common burnt clay building F.P.S. (non modular) bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure as per PWD specification, drawing and design and curing complete including scaffolding. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Coursed rubble masonry (first sort) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing First class Teak wood work in frames of doors , windows , clearstory, windows and other frames wrought , framed and fixed in position complete as per PWD specification. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 35 mm thick including ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including Stainless Steel butt hinges with necessary screws complete complete as per PWD specification. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 40mm (Forty millimetre) thick Second Class Deodar Wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled in but hinges with necessary screws complete as per PWD specification. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 35 mm thick (Thirty five millimetre) 2nd class teak wood wire gauge shutters using galvanised M.S. (mild steel) wire gauge using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm (zero decimal six three millimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government.
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax, sales tax or other taxes imposed by the Government
Providing and fixing M.S. plain grills 10x10mm (Ten into ten millimetre) square bar in combination of 20x4mm (Twenty into four millimetre) M.S. flat as per design required pattern in wooden frames of windows etc. with M.S. round headed bolts and nuts or by screws. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 250x16mm (Two hundred fifty into sixteen milimeter) size coloured / anodized aluminum sliding door bolt ISI marked (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. The rate is inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing coloured anodized aluminum tower bolts ISI marked (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
250x10mm (two hundred fifty into ten millimetre) size
100x10mm (one hundred fifty into ten millimetre) size
Providing and fixing coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetra complete. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
125mm (One hundred twenty five millimetre) size
100mm (One hundred millimetre) size
Providing and fixing 150mm (One hundred fifty millimetre) oxidized M.S. single acting spring hinges with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing oxidised M.S. casement stays (straight peg type) of 200 mm (Two hundred millimetre) weighing not less than 120 gms (One hundred twenty grams) with necessary screws etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing 100mm (One hundred millimetre) ISI marked oxidised M.S. Handles conforming to IS:4992 with necessary screws etcetra complete. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing the complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ IS marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of uniply / Greenply for shelves including hinges, handle complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing 65mm (Sixty five millimetre) special quality bright finished brasscupboard or ward robe locks with four levers of approved quality including necessary screws etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and laying 600x600 mm (Six hundred into six hundred millimetre) vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ sqm (Three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying 600x600 mm (Six hundred into six hundred millimetre) vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved make, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto three coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ sqm (Three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (Three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of First quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One Cement isto four Coarse sand), Jointing with grey cement slurry at the rate 3.3 kg/sqm (Three decimal three kilogram per square metre) including pointing the joints with white cement and matching pigment etcetra complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing First quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size in skirting, risers of steps and dados over 12 mm (Twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry at the rate of 3.3kg /sqm (Three decimal three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying Kota stone slab 20 mm (Twenty millimetre) thick Single slab flooring of approved shade over 20mm (Twenty millimetre) average thick base of cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Kota stone slab 20 mm (Twenty millimetre) thick in Single slab in riser of steps, skirting, dado and pillars of approved shade laid over 12mm (Twelve millimetre) average thick base of cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing pre-painted sheet roofing of kotar metal single skin trapezoidal 10 (ten) refitted sheeting 0.60mm (zero decimal six millimetre) thickness having 1060mm (one thousand sixty millimetre) cover width cover all width 1126mm (One thousand one hundred twenty six), 28mm (Twenty eight millimetre) crest depth at 353mm (three hundred fifty three millimetre) 2.50mm (two decimal five zero millimetre) the main crest with at top 25mm (Twenty five millimetre) and at lower 81mm (Eigthy one millimetre) base metal of coil rolled steel coil with zinc waiting top coat with regular modified polysters coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 55mm (fifty five millimetre) length with EPDM seal complete in all respect as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing pre-painted sheet ridge or hips 60cm (sixty centimetre) over all of kotar metal skin trapezoidal profiled sheeting 0.60mm (zero decimal six zero millimetre) cover with over all width 1126mm one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetre) crest depth at 353mm (three hundred fifty three millimetre) 2mm (two millimetre) centre to centre crest distance. There will be two ribs at the centre for stiffening heaving crest depth of 2.5mm (two decimal five millimetre) the main crest with at top zinc waiting top coat with regular modified polyster coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 550mm (five hundred fifty millimetre) length with DPDM seal complete in all respect as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing 595x595x6mm (Five hundred ninety five into fiive hundred ninety five into six millimetre) designer board of everest (E-Board) ceiling with pre-painted GI channel framing @ 600 mm c/c (Six hundred millimetre centre to centre) complete as per PWD specification,approved drawing, design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 15cm (Fifteen centimetre) wide, 45cm (Forty five centimetre) overall semi circular plain G.S. sheet gutter of 0.63mm (zero decimal six zero millimetre) thick sheet with zinc coating not less than 275 gm/ sqm (Two seventy five gram per square metre) fixed with iron brackets 40x3mm (Forty into three millimetre) siz, bolts, nuts and washers etcetra including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals, as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing valleys 90cm (Ninety centimetre) overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers of 1.60 mm (One decimal six zero millimetre) thick with zinc coating not less than 350 gm/sqm (Three hundred fifty gram per square metre) including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals, as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing 110 mm (One hundred ten millimetre) Single socketed pipes on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion, complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
110mm (one hundred ten millimetre) dia PVC plain bend
110mm (one hundred ten millimetre) dia PVC shoe
Structural steel work riveted, bolted or welded in built up sections of Tata/Sail in beams, joists, channels, angles, tees flats with connecting plates or angles, cleats as in trusses and trussed purlins, main and cross beams, hips, jack rafters, purlins connect to common rafter and like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
20mm (Twenty millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
20mm (Twenty millimetre) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
20mm (fTwenty milimetre) thick cement plaster on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:4 (one cement isto four sand) including curing as per PWD specification and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
6mm (six millimetre) cement plaster 1:3 (one cement isto three sand) in ceiling and curing complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Applying a priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paints of Asian/ Nerolac Paint brushing wood primer pink as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Painting two coats (excluding priming coat) on new wood and wood based surfaces with Dulux Multi Surface paint of required shade applied at the rate of 0.90 ltr/10 sqm (zero decimal nine zero litre per ten square metre) over an under coat of primer applied at the rate of 0.75 ltr/ 10 sqm (zero decimal seven five litre per ten square metre) including cleaning the surfaces of all dirt, dust and other foreign matters and sand papering and knotting as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Applying Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matt finish to the surface complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Distempering (two or more coats) with oil bound washable distemper of Berger/Nerolac/Asian Paint and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as PWD specification. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Finishing wall with spectrum textured wall finish natural grit of heritage coating of 1.5 mm (One decimal five millimetre) thickness water proffing cement paint of approved shade and manufacture and of required shade on undecorated wall surfaces (two or more coats at the rate of 3.84 Kg/ 10.00 Sqm (Three decimal eight four kilogram per ten square metre) to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powedred material.The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing stainless steel 85 cm ( Eighty five centimeters) high know down stair railing of kitch 38 mm (thirty eight millimetre) dia hand rail fixed on 10x50 mm ( ten into fifty millimetre) side mounted flat blauster system with glass no DS 54-2- G-10 placed at 1200 mm ( twelve hundred millimetre) center to center along with 3 Nos (three numbers) 10mm ( ten millimetre) mid rail connected at side of blauster with fixes on the blauster would be fixed on floor with casted base plate on minimum 6 mm (six millimetre) thickness base plate shall be conncected with suitable SS grade over cape alinging complete as per detail and design. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing plinth protection with 60 mm (Sixty millimetre) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centimetre) concrete 1:5:10 (one isto five isto ten) in bedding/ haunching complete including cost and carriage of material with in all leads, lifts and other incidentals as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or residual bitumen applied hot a 1.45 Kg/sqm (one decimal four five kilogram per square metre) area for each course second course of roofing felt type 3 grade-I (hessian base self finished bitumen felt) and fourth and final course of stone grit 6mm (Six millimetre) and down size of pea size gravel spread at at 6.00 cum/ sqm including preparation of surface excluding grading complete including cost and carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 (Ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing White Vitreous China Wash basin size 630x450 mm (Six hundred thirty into four hundred fifty millimetre) with a single 15 mm (Fifteen millimetre) C.P. brass pillar tap wash basin with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing vitreous China pedestal of Jaguar/ Hindware/ Cera/ Jal for wash basin having recess at the back for the reception of pipes and fittings including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing G.I. inlet connection pipe for each flush pipe with W.C. pan as per Architectural drawing, design and specifications including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing 32mm (Thirty two millimetre) diametre PVC Waste pipe for wash basin or sink including brass check net with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing 100mm (One hundred milimetre) nominal size diametre CP grating of ESS-KSS for nalhni trap of approved shade complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 8 mm (Eight millimetre) diametre C.P. / S.S. Jet with flexible tube upto 1.00 (One) metre long with S.S. Triangular plate to Eureopean type W.C. of quality and make within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass 6mm (six millimetre) thick of Modiguard/ Atul/ Golden Fish mounted on 6mm (six millimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing 600x120x5mm (Six hundred into One hundred twenty into five millimetre) glass shelf with C.P. Brass bracket and guard rail fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetra complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600mm (Six hundred millimetre) long towel rail with total length of 645 mm (Six hundred forty five millimetre), width 78 mm (Seventy eight millimetre) and effective height of 88 mm (Eighty eight millimetre), weighing not less than 190 gms (One hundred ninety grams) complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing chromium plated brass soap dish of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal ESS with C.P. brass brackets fixed with cleats C.P. brass screws including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing 15mm (Fifteen milimetre) diameters C.P. brass bib tap of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal as per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing concealed C.P. brass stop cock of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal (heavy duty makes ISI marked ) 15mm (Fifteen millimetre) as per specifications including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing PVC connection pipe brass union 450 mm (Four hundred fifty millimetre) length 15mm (Fifteen millimetre) diametre of ISI marked including necessary fitting complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats including necessary fitting complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
25 mm (Twenty five millimetre) nominal size bore
15 mm (Fifteen millimetre) nominal size bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 1216 ( 16mm OD Pipe) Concealed work, Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celsius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (One) metre spacing. This includes the costs of cutting chases and including testing of joints complete including cutting chases and aking good the wall etcetra within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 25mm (Twenty five millimetre) diametre G.I. pipes complete with G.I. Fittings including trenching and refilling etcetra within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and fixing 15mm (Fifteen millimetre) diametre G.I. pipes complete with G.I. Fittings including trenching and refilling etcetra within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Providing and laying cement concrete 1:5:10 (One Cement isto Five Sand isto ten) graded stone aggregate 40mm (Forty millimetre) nominal size for bedding of pipes of the 150 mm (One hundred fifty millimetre) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
Providing and fixing high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
75 mm ( Seventy five millimetre)
110 mm ( One hundred ten millimetre)
150 mm ( One hundred fifty millimetre)
Providing and fixing PVC single Equal Branch with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
75 mm ( Seventy five millimetre) diametre
110 mm ( One hundred ten millimetre) diametre
Providing and fixing 110x90 mm (one hundred ten into ninety millimetre) PVC Floor Trap ISI marked self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
Constructing masonry Chamber 60x60x75cm (Sixty into sixty into seventy five centimetre) inside, in brick work in cement mortar 1:4 (One cement isto four coarse sand) for sluice valve, with C.I. surface box 100mm (One hundred millimetre) top diameter, 160 mm (One hundred sixty millimetre) bottom diameter and 180 mm (One hundred eighty millimetre) deep ( inside) with chained lid and RCC top slab 1:2:4 (One isto two isto four) mix (One cement isto two coarse sand isto four) 20mm (Twenty millimetre) nominal size graded stone aggregate including necessary excavation, foundation concrete 1:5:10 (One cement isto five sand isto Ten) 40 mm nominal size (Forty millimetre) graded stone aggregate and inside plastering with cement mortar 1:3 (One cement isto three coarse sand) 12 mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The Rate is inclusive of toll tax, GST and any other taxes imposed by the government.
C M RANA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .