8703 SPECIAL REPAIRS TO CERTAIN TECH BLDGS OF ALPHA SQN, PROVN OF SHED AT GROUND RUN POINT FOR SUPPORT EQUIPMENT AT BRAVO SQN, SPECIAL REPAIRS TO UNSERVICEABLE LED LIGHTS, FANS AT ALPHA SQN WITH REWIRING IN UWO STORE, DSS COMPLEX AND OTHER BLDGS AT

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work.

M&L for providing and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225: 1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (Part-4), fire performance as per BS:476 (Part 6&7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518 : 1991, in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sq.m including both sides) comprising of main T runners of size 24x32mm of length 1200mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sq.m) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm c/c and 40mm long dry wall/ partition with the help of plastic rawl plugs at 450 mm c/c and 40mm long dry wall S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.

M&L for complete removal of existing treatment from walls and applying two coats of distemper oil emulsion over a coat of primer over 1.5mm thick white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified and as directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for machine cut Kota stone slab flooring 20-25mm thick laid over and including 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces, finishing even and smooth without using extra cement complete all as specified.

M&L for 40mm thick cement concrete PCC 1:2:4 type B1 using 20mm graded aggregate as in sub base for flooring all as specified

M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.

M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11sq.m but n.exc. 0.18sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L for double charged, vitrified tiles, coloured, first quality of size 600x600mm, 9 to 10mm thick as in Floors/ skirting, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by GE.]

Taking up or down galvanized steel tubing 15mm bore with fittings.

Taking up or down galvanized steel tubing 20mm bore with fittings.

S&F GI tubes 15mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repairs Stop valves, 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and as directed

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F in repairs Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

S&F PVC connection 15mm size 450mm long with PTMT nuts on both sides.

S&F in repair vitreous china white flat back wash hand basin 550 x 400mm size including CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.

S&F in repairs vitreous china ware wash down water closet pan (pedestal pattern) white including PVC seat cover with mild steel chromium plated or aluminised hinging device, fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed

S&F in repairs vitreous china urinals half stall type complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement all as specified.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed.

Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5sq.m. each all as specified.

Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 176 of SSR Part-II-2020.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Butt hinges and necessary screws shall be paid separately)

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. complete all as specified and as directed. [Note: Weight of builders hardware & rubber beading shall not be considered for payment, however rate quoted shall be deemed to be included for the same]

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) door shutters, aluminium section weighing not less than 1.00 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified and as directed. [Note: Panel inserts like glass, prelaminated particle board & gauge shall be measured & paid separately]

S&F 5.50 mm thick sheet glass (tinted/ reflective type) of any size complete fixed to aluminium frames

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, SS friction hinges etc. complete all as specified and as directed. [Note: Panel inserts like glass & gauge shall be measured & paid separately]

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing clips/ wooden beads in any size all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.

M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in plinth courses, copings, bed plates, ramp etc complete including necessary formwork all as specified.

M&L for 75mm thick cement concrete PCC 1:2:4 type B2 using 40mm graded aggregate as in flooring/ hard standing finishing even and smooth without using extra cement all as specified.

M&L for pre-polished coloured chequered cement concrete tiles of size 300x300mm, 25mm thick, set, jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M&L for providing precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

M&L for preparation of old painted wooden surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old decorated surfaces of walls and cornices by washing, rubbing down and stopping of surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.

S&F 100mm long cold rolled MS butt hinges medium weight.

S&F extruded aluminium handle 150mm long fabricated type anodized all as specified.

S&F extruded aluminium handle 125mm long fabricated type anodized all as specified.

S&F 300mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 125mm long aluminium anodized barrel tower bolts of extruded section.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section.

M&L for complete removal of existing treatment from walls/ roof/ ceilings and applying two coats of weather proof exterior emulsion of olive green colour as base coat and making camouflage pattern by applying two more cots of different coloured patches in different shapes as directed complete all as specified and as directed

Excavating in post holes (or similar holes) each n.exc. 0.5cu.m., getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering, and removing surplus soil to a distance n.exc. 50m and making good surface in in any type of soil all as specified.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.

M&L for steel work in tubular trusses, posts etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240 all as specified and as directed.

M&L for mild steel plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe.410-W. (Gde-E-250, Quality-A) complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

Taking down carefully aluminium/ copper point wiring for light, fan, socket or power point etc. complete with all fittings and fixtures such as switch piano, ceiling rose, switch socket, pendants etc including making good surface of wall, ceiling etc complete all as specified.

Taking down carefully existing sub-main wiring of any description complete all as specified.

Taking down distribution board of any type including cutout, MCBs etc. complete all as specified and as directed.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 60 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 60 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

All as per item No. 60 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

All as per item No. 60 herein before but point wiring with 1100 volt grade 4sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make :- Philips Cat Part No : BN100C LED20S-6500 PSU L120 GR S4/ Havells Cat Part No : STOUT PLUS 600BS 20W LED 857SPCWH/ Wipro Cat Part No : Wipro Garnet 20W LED Batten (White) D532065

S&F recess mounted direct lighting LED Luminaire 34-36W of size 2'x2', with powder coated CRCA housing, seamless front frame, flat white high transmission acrylic cover fixed to Modular/ Gypsum/ POP ceiling complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting all as directed including taking down existing unserviceable light fitting. [Cat No. PLUTONEO2X2PLR34WLED857S of make: Havells or Cat No. RC380B LED36S-6500 G5 L60W60 PSU OD of make: Philips or Cat No. LCTLRNE-36-FO-CDL of make: CG/ Cat No. CRCO10S038HP57GL of make Wipro with frame of Cat No. 9180P01089 LP]

M&L for Angle Holder, insulated body with back plate with & including LED Lamp 12 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

S&F Ceiling fan complete with blades, white colour, with down rod, including all accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) complete including taking down old un serviceable fan and handing over to AGE E/M Store all as specified and as directed. [Make :- Usha Model No: Usha Energia 32 1200mm, Havells Model No: Havells Efficiencia Neo 1200mm, Orient Model No: Orient Electric I Tome Plus 1200mm]

S&F Exhaust fan 300mm sweep, single phase 230V, AC metal body with louvers including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sq.mm complete including taking down existing exhaust fan and handing over to AGE E/M Store all as directed. [Make: Model No. 'Ventil Air - DB' of make: Havells or equivalent in Almonard/ Bajaj/ Crompton]

S&F Air Circulator fans 230 volts single phase oscillating type, 600 mm sweep suitable for wall mounting complete, with regulator, 180W, 1440 RPM, heavy duty including taking down old unserviceable Air Circulator fan and handing over to AGE E/M Store complete all as specified and as directed. [Make :- Orient Model No 600 mm Thunderstorm Wall-Parrot Green, or equivalent make of Almonard Model No 600mm (24") Wall, with Regulator, Havells Model No FHACWSTSCL24 600MM Turbo force Wall Fan]

S&F desert cooler with powder coated GI body, electric driven, single phase 220 Volts, 50 Hz with tank capacity 55 Litres, 1350 RPM, 3 speed controls including taking down old unserviceable cooler and handing over to AGE E/M Store complete all as specified and as directed. [Model No. Metal Ultracool 300S of make: Ram coolers or equivalent in Symphony/ Kenstar]

S&F LED flood light luminaire, with high power LEDs 70 watt with pressure die cast aluminium housing & heat resistant toughed glass (IP 66 protection) with system lumen efficacy ≥ 110 Lum / Watt, with operating voltage range 140 - 270 V AC, 50Hz ± 3Hz, Surge protection >3KV including driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.0 Sq.mm from MCB to flood light for controlling the flood light complete all as specified and directed by Engineer in-Charge. [Cat No. LFL-80-CDL/60-M of make: CG/ Cat No. JETAALBAFLOODLIGHT70W of make: Havells/ Cat No. BVP120 LED 70 CW FG S1 PSU GR of make: Philips]

S&F suspended/ surface type High bay luminaire not less than 140 Watt, environmental friendly, energy saving long life corrosion resistant vertical surface mounting pressure die-cast aluminium housing and control gear with high power LED with all mounting accessories for fixing to truss of hangar/ MT garage etc complete prewired with flexible 3 core 1.50sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and as directed including taking down existing unserviceable light fitting. [Model: SAUSERPLUSHBP150WLED85790DTOLTG of make: Havells or BY415P LED160S CW HE WB FG PSU GR XTFCL S5 of make Philips or BGHBM NXT B 195L WH NB SD of make: Bajaj]

S&F LED type street light fitting not less than 65W, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-66 with high power LEDs and unique peanut lens to ensure uniform light distribution complete with all accessories pre-wired as per Cat. Part No. BRP062 LED 65 CW SLA S1 PSU (SmartBright Street) of Philips or ENDURA CITYLINER NEOSL70W LED757 PASYBOTG (ENDURA CITYLINER NEO) of Havells or LR02-671-XXX-57-G2 (Skyline) of Wipro complete all as specified and directed.

S&F in repairs single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts complete all as directed.

S&F switch piano, flush type SP, one way 5/6 Amps, 230V AC

S&F switch piano, flush type, SP, one way, 15/ 16 Amps, 250 V, ISI marked.

S&F socket outlet 6 Amp, 2 in 1, 5 pin, 230V AC

S&F socket outlet 6/16 Amp, 2 in 1, 6 pin, 230 V AC

S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.

S&F electronic fan speed regulator, suitable for single phase AC 240 volts, 50 Hz, 100 watts complete all as specified and as directed by Engineer-in-Charge.

M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

S&F sheet steel powder coated distribution board Vertical type TPN 8 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door (Metal), suitable for mounting MCCB as incomer and MCBs as out going all as specified and as directed. [Cat No. 5077 47 of Make: Legrand or DBVTH008DD of L&T or equivalent in Havells]

S&F MCCB 4 Pole, 125 Amps, 16 kA, 415 volts with thermal magnetic release, connecting up with necessary spreader links complete all as directed.

S&F sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.

S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.

S&F MCB SPN, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.

S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.

S&F MCB TPN, 415 volts, 100 Amps, C curve 10 KA all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to 4mm dia GI earth continuity wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion.

Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.

Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.

Supply and spread river sand as in cushioning for UG cable all as specified in clause 19.75 of SSR Part I. [Note: Punned down thickness shall be considered for payment]

M&L for well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, complete all as specified and directed.

Making horizontal bore hole under the road suitable for drawing up to 80mm bore pipe at a depth not less than 1 Mtr below ground level for passing of LT underground cable complete all as specified and as directed.

Supply and laying GI pipe of 50mm bore dia light grade for cable protection, laid in trenches for drawing cables complete all as specified and as directed.

Supply and laying GI pipe of 80mm bore dia light grade for cable protection, laid in trenches for drawing cables complete all as specified and as directed.

Supply, lay, connect, test and commissioning of LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 4 Core 25 Sq.mm complete including taking up existing unserviceable cable all as specified and directed. Note: (i) Contractor shall bring the entire cable in one length. (ii) Necessary test results like continuity test, megger tests shall be submitted to Engineer-in-Charge before the cable is laid. (iii) Excavation & earth work will be measured and paid separately.

All as per Item No. 100 herein before but cable of size 3.5 core 35sq.mm

All as per Item No. 100 herein before but cable of size 3.5 core 50sq.mm

All as per Item No. 100 herein before but cable of size 2 core 16sq.mm

S&F MCCB 4 Pole, 200 Amps, 16 kA, 415 volts with thermal magnetic release, connecting up with necessary spreader links complete all as directed.

S&F sheet steel powder coated distribution board Vertical type TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door (Metal), suitable for mounting MCCB as incomer and MCBs as out going all as specified and as directed. [Cat No. 5077 45 of Make: Legrand or DBVTH004DD of L&T or equivalent in Havells]

M&L for street light bracket made of GI pipe medium grade 32mm dia, appx 1.20 m long bent to shape suitable for fixing street light fixed to pole with 2 Nos of MS FI brackets with nuts and bolts complete including painting with two coats of aluminium paint over a coat of zinc chrome primer all as specified and as directed

S&F copper wire PVC insulated 3 core multi-stranded of size 1.5 sq.mm with FRLS PVC insulated copper conductor cable in surface/ recessed as required from DB to street light fittings complete all as directed

M/S Quality Constructions

M/s Agarwal Builders

MOHINDER SINGH AND SONS

M/S BABA ENTERPRISES