CMC FOR FIRE FIGHTING SYSTEM AND OTHER CONNECTED ITEMS INSTALLED AT MH JODHPUR AND HQ CEJZ UNDER GE (A) NO. 2 JODHPUR

Amount

Material and labour for repairing/servicing the Electric induction motor and Centrifugal pump coupled type by carefully disconnecting the connection cables and earthings, disconnection of electric, water supply connections both side (suction and discharge side) and fixing of dummy plates as per site requirement. Removing side covers, servicing, greasing, changing of gland packing, gaskets, defective minor parts and re-assembling, testing, preparing the surfaces of the motor and pump for painting with two coats of synthetic enamel paint and commissioning the motor and pump of capacity 60 to 75 HP to the satisfaction of Engr-in-Charge. Note: (i) The rent of T&P for handling the pump motor assembly during dismantling and refixing is deemed to be included in the rate quoted by contatcor. (iii) Major spare parts of motor will be measured and paid separately under following respective items.

Supply only Gland bush suitable for 60 to 75 HP existing pumpset complete all as specified and directed by Engineer-in-charge.

Supply only Ball bearing suitable for 60 to 75 HP exisiting pumpset complete all as specified and directed by Engineer-in-charge.

Supply only CI Impeller suitable for 60 to 75 HP pumpset complete all as specified and directed by Engineer-in-charge.

Material & Labour for rewinding the armature housing of exisitng upto 75 HP Electric induction motor dismantled with super enameled copper winding wire of appropriate gauge of thermal class “E” insulation including testing after rewinding complete all as specified and directed by Eng-In-Chrage.

Supply only MS coupling with rubber seal suitable for exisiting upto 75 HP induction electic motor complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in replacement Star Delta starter complete unit suitable for 60 to 75 HP motor including single phase preventer and connected accessaries complete all as specified and directed by Engineer-in-charge.

Material and labour for repairing/servicing the Electric induction motor and centrifugal pump coupled type by carefully disconnecting the connection cables and earthings, disconnection of electric, water supply connections both side (suction and discharge side) and fixing of dummy plates as per site requirement. Removing side covers, servicing, greasing, changing of gland packing, gaskets, defective minor parts and re-assembling, testing, preparing the surfaces of the motor and pump for painting with two coats of synthetic enamel paint and commissioning the motor and pump of capacity upto 10 to 15 HP to the satisfaction of Engr-in-Charge. Note: (i) The rent of T&P for handling the pump motor assembly during dismantling and refixing is deemed to be included in the rate quoted by contatcor. (iii) Major spare parts of motor will be measured and paid separately under following respective items.

Supply only Gland bush suitable for upto existing 10/15 HP pumpset complete all as specified and directed by Engineer-in-charge.

Supply only Ball bearing suitable for upto existing 10/15 HP pumpset complete all as specified and directed by Engineer-in-charge.

Supply only CI Impeller suitable for upto existing 10/15 HP pumpset complete all as specified and directed by Engineer-in-charge.

Material & Labour for rewinding the armature housing of exisitng upto 15 HP Electric induction motor dismantled with super enameled copper winding wire of appropriate gauge of thermal class “E” insulation including testing after rewinding complete all as specified and directed by Eng-In-Chrage.

Supply only MS coupling with rubber seal suitable for exisiting upto 10/15 HP induction electic motor complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in replacement Star Delta starter complete unit suitable for upto 15 HP motor including single phase preventer and connected accessaries complete all as specified and directed by Engineer-in-charge.

M&L required for inspection, maintenance and servicing to existing upto 80 HP Diesel driven engine fire pump Make:Kirlosker for 'B' check as per the recommendations of manufacturer including replacement of necessary recommended filters, engine oil, 'O' rings etc. making it serviceable complete all as directed by Engineer-in-charge. Note:-Major spare parts will be measured and paid separately under following respective items.

Supply only Diesel filter (Primery&Secondary) suitable for existing upto 80 HP Diesel driven engine fire pump Make:Kirlosker

Supply only Engine oil filter suitable for existing upto 80 HP Diesel driven engine fire pump Make:Kirlosker

Supply only Air cleaner element suitable for existing upto 80 HP Diesel driven engine fire pump Make:Kirlosker

Supply & fixing 1.50 M battery lead with negative & positive brass terminals of suitable size, complete all as specified and directed by Engineer in charge.

M& L required for servicing and repair self starter 12 V for Diesel driven engine fire pump including replacement of parts such as corban brushes, solonaid, rotor,washer, nut, bolts etc assembling the same and testing complete all as specified and directed by Engineer in charge. .

Taking down existing earthing and M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm bore light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed by Engineer-in-charge. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth strip. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of earth wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply only four Pole contactor suitable for existing upto 80 HP Diesel driven engine fire pump complete all as specified & directed by Engineer-in-Charge.

Supply only four Pole contactor suitable for existing upto 75 HP pumpset complete all as specified & directed by Engineer-in-Charge.

Supply only contactor suitable for existing upto 10/15 HP pumpset complete all as specified & directed by Engineer-in-Charge.

Supply only indicator lamp set RYB for phase indications suitable for panel to match with the existing one complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in replacement of MCCB 100 A, 4 Pole,25 kA with adjustable thermal and magnetic release in existing panel the make should be of the same of existing MCCB to mach with existing holes/surface complete all as specified and directed by engineer- in- charge.

Supply & Fixing in replacement of MCCB 200 A, 4 Pole, 25kA with adjustable thermal and magnetic release in existing panel the make should be of the same of existing MCCB to mach with existing holes/surface complete all as specified and directed by engineer- in- charge.

Supply & Fixing in replacement Single Phase preventer for 3 phase motor for star delta starter suitable for existing motor complete all as specified and directed by engineer-in-charge.

Supply & Fixing Voltmeter 0-500 volts square /round digital type including taking down old unsv complete all as specified and directed by engineer-in-charge.

Supply & Fixing Amp meter 0-200 amps square /round digital type including taking down old unsv complete all as specified and directed by engineer-in-charge.

Supply and laying in repairs Synthetic insulating mat of size 2mx1mx10mm complete all as specified and directed by Engineer-in-charge.

Supply only Coolent complete all as specified and directed by Engineer in charge. Make: K-cool/Indian oil/Volvoline

Supply only Engine oil 20 W 40 turbo synthetic superior quality engine oil suitable for Kirloskar/Cumins complete all as specified and directed by Engineer in charge. (Note:-The make of engine oil used in Diesel driven engine fire pump should be as per recommendation of Manufacturer of DG Set)

S & F in replacement of inlet and outlet fuel pipe from fuel tank to engine as per existing size and make complete all as directed by Engineer-In-charge.

Supply, laying, testing and commissioning of LT cable XLPE insulated galvanized steel strip heavy duty armoured electric power cable with stranded aluminium conductor 1100 volts grade 16 sq mm 2 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it.

Supply, laying, testing and commissioning of LT cable XLPE insulated galvanized steel strip heavy duty armoured electric power cable with stranded aluminium conductor 1100 volts grade 25 sq mm 4 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it.

M& L for Cleaning of U/G sump of capacity 20000 Gln, first with plain water and then with the bleaching powder 20 Kg after cleaning making white wash of the inner surface with the lime complete all as directed by the Engineer-in-Charge. Note:- The job shall be completed within 8 hrs to avoid any interruption in the system

Supply & fix in replacement of unserviceable battery 12 V, 150 with maintenance free battery 12 volt initially charged including taking down old unserviceable complete all as specified and directed by Engineer-in-charge. Make :- EXIDE / AMRON / LUMINOUS

Material & Labour for preparing of old steel surfaces and applying two coat of synthetic enamel paint of existing existing colour for following fire fighting equipment (i) DD Pump - 02 Nos, (ii) Pipe lines with all Valves - 02 KM (approx) (iii) Hose cabinet box-10 Nos, (iv) Hose drum - 10 Nos etc with two coats of synthetic enamel paint of existing colour in MH & HQ CE office Fire Fighting Pump System. Note: Prior Approval of colour sample of paint should be taken from Engr-in-Charge before applying also numbering & lettering of equipmets will be done as specified and directed by engineer-in-charge.

Supply &Fixing in repair of rotational moulded polyethylene water storage tanks of capacity 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified including dismantling the unsv tank and necessary connections inlet and outlet should be done all as directed by Engr-in-Charge.

M&L Servicing Single /Double head fire hydrant of any type any size taking out, checking out for any obstructions to the functioning of hydrant, servicing, replacement of damaged parts/accessories, like bolts & nuts, rubber gaskets and springs etc complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement oblique type gun metal landing valve single headed of size 63mm, inlet 3' NB flanded, outlet- female instantaneous with grey cast iron handle wheel with fixing arrangement viz- GI flange 100 mm/GI flange 80mm, GI bend 80/100 mm, GI nipple 100 mm/GI nipple 80 mm complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable sluice valves and Supply & Fixing 100 mm bore sluice valve long body, PN 1.6 with brass spindle both end flanged ISI marked complete with CI wheel nut bolt washer and rubber packing conforming to IS 14846-2000, complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable sluice valves and Supply & Fixing 150 mm bore sluice valve long body, PN 1.6 with brass spindle both end flanged ISI marked complete with CI wheel nut bolt washer and rubber packing conforming to IS 14846-2000, complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in replacement oblique type gun metal landing valve double headed of size 63mm, inlet 3' NB flanded, outlet- female instantaneous with grey cast iron handle wheel with fixing arrangement viz- GI flange 100 mm/GI flange 80mm, GI bend 80/100 mm, GI nipple 100 mm/GI nipple 80 mm complete all as specified and directed by Engineer-in-charge.

M&L Servicing of Sluice/ Non return valve of any size upto 200 mm dia taking out, checking out for any obstructions to the functioning of sluice/ NRV, servicing, replacement of damaged parts/accessories, like bolts & nuts, rubber gaskets, gland packing etc and refixing the same as before complete all as specified and directed by engineer-in-charge.

Supply & Fixing in repair gun metal threaded foot valve of size 100 mm dia with suitable strainer complete all as specified and directed by engineer-in-charge.

Supply & fixing branch pipe gun metal 63 mm instantaneous inlet,made threaded outlet,15 mm bore nozzle short complete all as specified and directed by engineer-in-charge.

Supply and fixing in repairs cast iron butter fly valves lever operated SS disc type nitrile/EPDM rubber lining PN 1.6 of bore 65 mm complete all as specified and directed by the Engr-in-Charge. (Make: LEADER/CASTLE/ ZOLOTO).

Supply and fixing in repairs cast iron butter fly valves lever operated SS disc type nitrile/EPDM rubber lining PN 1.6 of bore 80 mm complete all as specified and directed by the Engr-in-Charge. (Make: LEADER/CASTLE/ ZOLOTO).

Supply and fixing in repairs cast iron butter fly valves lever operated SS disc type nitrile/EPDM rubber lining PN 1.6 of bore 100 mm complete all as specified and directed by the Engr-in-Charge. (Make: LEADER/CASTLE/ ZOLOTO).

Supply and fixing in repairs cast iron butter fly valves lever operated SS disc type nitrile/EPDM rubber lining PN 1.6 of bore 150 mm complete all as specified and directed by the Engr-in-Charge. (Make: LEADER/CASTLE/ ZOLOTO).

Supply and fixing in repairs cast iron butter fly valves lever operated SS disc type nitrile/EPDM rubber lining PN 1.6 of bore 200 mm complete all as specified and directed by the Engr-in-Charge. (Make: LEADER/CASTLE/ ZOLOTO).

S&F in replacement Hose box made of 18 gauge MS Sheet 900mm X 1000mm X 715mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet with lock and keys suitable to accommodate two canvas fire hose of dia 63mm dia, length 15 meter painted fire red out side and brilliant white inside yard suitable for outdoor application complete all as specified and directed by engineer-in-charge.

S& F in repair pressure guage with 4'' dial 0-21 Kgs complete all as specified and directed by engineer-in-charge.

S&F in repair pressure switch universal type complete all as specified and directed by engineer-in-charge.

S&F in repair canvas hose of dia 63mm dia and length 15 meter of PIL dura type conforming to IS 636/1988 Type-A with proper exterior and interior coatings complete all as specified and directed by engineer-in-charge.

S&F in repair canvas hose of dia 63mm dia and length 30 meter of PIL dura type conforming to IS 636/1988 Type-A with proper exterior and interior coatings complete all as specified and directed by engineer-in-charge.

Material and labour required for rectification of leakage of fire fighting water pipe lines of size 80 to 150 mm Bore of any description such as CI/DI/GI/MS pipe line at any location including necessary excavation, earth work, dewatering, cutting existing pipe lines upto 60 cm including repairs with suitable Clips,flanges, Joints or any other material complete all as specified and as directed by engineer-in-charge

M & L for repairing of stone masonary valve pit type B of size 120cm x120 cm x 120cm(Internal Dimension) of chamber for sluice valve by providing M.S sheet 3.15mm thick with handle, locking arrangement and one no pad lock of 65mm size for double/single door, PCC work 1:2:4 with 20mm graded stone aggregate necessary excavation, plastering with cement mortar 1:4, 15mm thick finished with floating coat of neat cement, PCC copping type B1 ( 1:2:4 with 20 mm graded stone aggregate M.S angle iron of size 40x40x6 mm complete as per latest TD Drawing complete all as specified and directed by Engineer-in-charge.

Supply,Connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-65/66 protection of street light luminaries 35 watt , impact resistance, fixed on pole including taking down unserviceable light fitting complete all as specified and as directed by Engineer-in-charge. Make:-Crompton/Bajaj/Havells/Wipro

Supply and fix in repair Sprinkler glass bulb type (Standard response) as per IS:15106/TAC guidelines 68 degree temperature rating pendent type complete all as specified and directed by engineer-in-charge.

M&L for Servicing / Maintenance / Repair/ testing and commissioning of complete Fire Alarm system installed at HQ CEJZ, Jodhpur which is consist following items :- (a) Multi sensor analog smoke Detector - 220 Nos. (b) Analog Heat detector - 17 Nos. (c) Fire Alarm sounder - 20 Nos. (d) Response Indicator - 23 Nos. (e) Microprocessor based main control panel - 02 Nos. (f) Repeater panel - 02 Nos and other connected items for their connection i.e. cable and servicing complete all as specified and directed by engineer-in-charge. Note:- (i) Replacement cost of minor part included in above mentioned cost (ii) Replacement of unsv items/ parts suitable for fire alarm system shall be paid seperately under respective items.

Supply, Installation, Testing, Commissioning and replacement Multi Sensor analog smoke detector complete all as specified and directed by engineer-in-charge.Make:Honeywell,SIMPLEX and Autronica.

Supply, Installation, Testing, Commissioning and replacement Analog heat detector complete all as specified and directed by engineer-in-charge Make:Honeywell,SIMPLEX and Autronica.

Supply, Installation, Testing, Commissioning and replacement Fire alarm sounder complete all as specified and directed by engineer-in-charge. Make:Honeywell,SIMPLEX and Autronica.

Supply, Installation, Testing, Commissioning and replacement Response indicator complete all as specified and directed by engineer-in-charge. Make:Honeywell,SIMPLEX and Autronica.

Supply, Installation, Testing, Commissioning and replacement Control module complete all as specified and direceted by engineer-in-charge. Make:Honeywell,SIMPLEX and Autronica.

Supply, Installation, Testing, Commissioning and replacement Monitor module complete all as specified and direceted by engineer-in-charge. Make:Honeywell,SIMPLEX and Autronica.

Supply, Installation, Testing, Commissioning and replacement of Manual Call Point, alarm status indicated by LED, 24 V DC operation, NC & NO output complete all as specified and directed by engineer-in-charge. Make:Honeywell,SIMPLEX and Autronica.

Supply, Laying & Terminations of 2 Core 1.5 sq. mm. PVC cable complete all as specified and directed by engineer-in-charge. Make:- Finolex, havells, Polycab, RR cable

Supply and fixing Maintenance free batteries 12 V, upto 20 AH capapcity Make : Amaron / Exide / Okaya or existing equivalent make.

Anil Builders