Construction of Two Gates ( Main Gate at Front side and 1 gate at back side) in Co.No. 108/R amd 109/R (Phanghai-Thanamandi) of Rajouri Range, Rajouri Forest Diovision Rajouri under Nagar Van

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, pillars, piers, abutments, posts and struts.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm)

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Ordinary cement without any pigment.

Providing & Fixing service line Aluminium 10sq m

Providing and fixing wiring for light point/celling fan point/ heating point 1.5/2.5/4 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium classs PVC conducit with modular switch modular plates suitable GI box as required Make: Anchor / Havells or equvalent

Providing and fixing of halogen lights awith complete fitting

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade on new work Two or more coats.

Writing words on MS Sheet as per desired by site incharge

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Providing and fixing catterpiller Gate (Revolving gate)

Carriage of material from source to site of work by MT. sand av. Distance 25 KM MT and HL 1500 mtr

Carriage of material from source to site of work by MT. Bajri av. Distance 25 KM MT and HL 1500 mtr

Mahesh Kumar (BID ID -2232979)

Javed Iqbal (BID ID -2232118)

WAHEED MURAD WANI (BID ID -2234447)

Zarina Kouser (BID ID -2234727)

Barkat Hussain (BID ID -2231415)

IFTAKHAR ANJUM (BID ID -2235054)

SUMEET SAMBYAL CONTRACTOR (BID ID -2234582)

MOHINDER LAL GANGAL (BID ID -2228131)