Loading
Loading…
Loading…
Tender ID
Tender Value
₹22.9 L
EMD Value
₹22,900
Closing Date
11 Feb 2026, 6:00 pmClosed
Executive Engineer, Public Health Mechanical Division, Ahmedabad
Tender for Drilling 200 and 250 mm dia. (Total 8 numbers) DR bores by DR drilling rig & Installation ,testing & Commissioning of three phase sub. Pump set with required Accessories in 200/250 mm Dia Bores at various villages in Kapadwanj, Kathlal, Thasara & Galteshwar Talukas of Kheda district on as and when required basis for the period of one year
268564
18 of 2023-24. (3rd Re-invit)
Open
Drilling Works
Works
Ahmedabad
7 documents required · 7 mandatory
₹900
Yes
Engineer, Public Health Works Division, Nadiad
₹22,900
Yes
22 Jan 2026
22 Jan 2026
22 Jan 2026
11 Feb 2026
22 Jan 2026
Name of Work: Drilling 200 and 250 mm dia. (Total 8 numbers) DR bores by DR drilling rig &
Installation ,testing & Commissioning of three phase sub. Pump set with required Accessories in
200/250 mm Dia Bores at various villages in Kapadwanj, Kathlal, Thasara & Galteshwar Talukas
of Kheda district on as and when required basis for the period of one year
Sr. Particulars Qty Rate Unit Place of
1 200 and 250 mm dia. As per Pipe Free of Cost RMT Departmental
M S ERW / UPVC Assembly stores of P. H.
blank pipe Mechanical Sub
2 200 and 250 mm dia. ----- do ---- ----- do ---- RMT Division,
M S ERW / UPVC Kapadwanj
slotted / “V” screen
3 Single phase & Three As Per ----- do ---- Set
Phase submersible Requirement
pump set with control
4 Flat PVC submersible As Per ----- do ---- Rmt.
cable etc. of various Requirement
sizes & capacities.
5 HDPE/G.I. Column As Per ----- do ---- Rmt.
Pipes Requirement
2 ) S i ze o f t h e ab o ve i t ems w i l l b e as p er si ze o f p ar t i c ul ar t ub e w el l .
D R Kheda (Up to 300 Meter Depth) Page
3 ) T h e ma t e r i a l s s ho w n i n a bo ve s c h ed u l e w i l l be i s s ue d f r ee of co s t . H o w e ver
Signature of Contractor Executive Engineer
D R Kheda (Up to 300 Meter Depth) Page
Gujarat Water Supply & Sewerage Board
Public Health Mechanical Division, Ahmedabad
ABSTRACT OF PRICE BID (SCHEDULE B)
No Name of work details Amount in Rs
1 Schedule B 1: Drilling 200 mm dia. (Total 5 numbers) DR bores
by DR drilling rig & Installation ,testing & Commissioning of
three phase sub. Pump set with required Accessories in 200 mm
Dia Bores at various villages in Kapadwanj, Kathlal, Thasara &
Galteshwar Talukas of Kheda district on as and when required
basis for the period of one year.
2 Schedule B II:Drilling 250 mm dia. (Total 3 numbers) DR bores
by DR drilling rig & Installation ,testing & Commissioning of
three phase sub. Pump set with required Accessories in 250 mm
Dia Bores at various villages in Kapadwanj, Kathlal, Thasara &
Galteshwar Talukas of Kheda district on as and when required
basis for the period of one year
3 Schedule B III:Installation, Testing & Commissioning of Three Phase
Submersible Pump Set Including Providing & Fitting Required
Accessories in 250 / 200 mm dia DR Bores In Various Villages of
Kapadvanj, Kathalal, Thasara and Galteshvar Taluka of Kheda District
TOTAL For SCHEDULE B-1 & B-2 Rs.
Say Net Total Rs.
Signature of Contractor Executive Engineer
D R Kheda (Up to 300 Meter Depth) Page
Name of Work: Drilling 200 mm dia. (Total 5 numbers) DR bores by DR drilling rig &
Installation ,testing & Commissioning of three phase sub. Pump set with required Accessories in
200 mm Dia Bores at various villages in Kapadwanj, Kathlal, Thasara & Galteshwar Talukas of
Kheda district on as and when required basis for the period of one year.
Est. Qty. Description of Item Rate Unit Amount
Item No.1: MS Clamp
5 Supply of Bore clamps made from MS plate with 03 1627.71 Pair
holes on either side with nuts & bolts of standard
make & suitable size. 750 mm x 75 mm x 16 mm
flat suitable to 200 mm dia. Pipe
Item No.2: MS Bore plug
5 Supply of Bore plug having 100 mm height made 774.82 No.
from MS plate of 5 mm thickness with 03 holes at
equal distance on circumference for nut bolts type
locking arrangement with nuts & bolts & lock nuts
of standard make suitable to 200 mm dia. Pipe
Item No.3: MS Bail plug
5 Supply of Bail plug having length of 0.45 meter 842.61 No.
from medium class pipe as per IS suitable to
Item No.4: Steel Bent plates
762.75 Supply of Steel bent plates of size 150 mm x 150 66.59 No.
mm x 6 mm suitable to 200 mm dia. Pipe
(A-2) BORE MATERIALS (u.P.V.C.)
Item No.1: uPVC Bore plug
5 Supply of Bore plug having 100 mm height made 550.85 No.
from UPVC of standard make suitable for 200 mm
Item No.2: uPVC Bail plug ( Bottom cap)
5 Supply of Bail plug UPVC of standard make 822.05 No.
suitable for 200 mm dia pipe
(B) LABOUR OF DRILLING
462 (A) Drilling pilot bore hole of size 250 / 300 mm at 749.00 RMT
above village site in all starata by mud flush direct
462 (B) Reaming of 250 / 300 mm dia pilot bore hole to 347.00 RMT
size 450 mm dia. including assembling, jointing,
lowering of housing casing screen pipes & other
assembly items with gravel packing and clay balls
28.544 Supply of clay balls of size 25 mm to 50 mm made 751.00 Cu
D R Kheda (Up to 300 Meter Depth) Page
from sticky clay at site of work. Mtr
D R Kheda (Up to 300 Meter Depth) Page
30.592 Providing well sorted screened gravels at site of 2029.00 Cu
work of size ranging from 4 mm to 6 mm. Mtr
4 Supply of cement 6302.00 MT
4 (A.) Cement sealing 13273.00 Job
2 (B) Bottom sealing 6661.00 Job
372 Lowering of 100 mm dia drop line and 32 mm dia 148.00 RMT
Air line in the Drop line to develop each water
bearing zone came across upto the depth of tube
well (depth up to 186 mt) for development of
tubewell by Air Compressor.
Item No: 7: Air Compressor
8.5 (A) 600 CFM / 150 PSI capacity for 200 mm dia. 22205.00 LS
Bore upto 120 Mtr. direct by compressor delivery
hose.The air compressor run for minimum
hours or up to the availability of sand free
3 (B) 900 CFM / 200 PSI capacity for 200 mm dia. 27330.00 LS
Bore above 120 Mtr. but upto 200 Mtr. direct by
compressor delivery hose.The air compressor run
for minimum 06 hours or up to the availability of
sand free discharge.
Item No: 8: Sealing of existing tubewell
270 Sealing of existing tubewell by sticky clay as per 99.00 RMT
Item No: 9: Slotting of ERW pipes
2268 (A) Slotting of ERW pipes with minimum size of 0.2200 Per
slot 6.75 cm x 6.35 xcm x 3.12 mm for 200 mm dia. slot
Pipe. i.e.72 No. of slots/round & 12 No. of rounds
per 01 Meter length blank pipe (including
unloading of blank pipes from truck & reloading of
slotted pipes into the truck)
3024 (B) Slotting of ERW pipes with minimum size of 0.2300 Per
slot 6.75 cm x 6.35 xcm x 1.59 mm for 200 mm dia. slot
Pipe. i.e.96 No. of slots/round & 12 No. of rounds
per 01 Meter length blank pipe(including unloading
of blank pipes from truck & reloading of slotted
pipes into the truck)
Total Schedule BI:
D R Kheda (Up to 300 Meter Depth) Page
Name of Work: Drilling 250 mm dia. (Total 3 numbers) DR bores by DR drilling rig &
Installation ,testing & Commissioning of three phase sub. Pump set with required Accessories in
250 mm Dia Bores at various villages in Kapadwanj, Kathlal, Thasara & Galteshwar Talukas of
Kheda district on as and when required basis for the period of one year
(A-1) BORE MATERIALS (M.S.)(250 mm Bores
Item No.1: MS Clamp
6 Supply of Bore clamps made from MS plate with 03 2017.73 Pair
holes on either side with nuts & bolts of standard
make & suitable size. 900 mm x 100 mm x 16 mm
flat suitable to 250 mm dia. pipe
Item No.2: MS Bore plug
3 Supply of Bore plug having 100 mm height made 1150.12 No.
from MS plate of 5 mm thickness with 03 holes at
equal distance on circumference for nut bolts type
locking arrangement with nuts & bolts & lock nuts
of standard make suitable to 250 mm dia. Pipe
Item No.3: MS Bail plug
3 Supply of Bail plug having length of 0.45 meter 1054.48 No.
from medium class pipe as per IS suitable to
Item No.4: Steel Bent plates
378 Supply of Steel bent plates of size 200 mm x 150 90.80 No.
mm x 6 mm suitable to 250 mm dia. Pipe
(A-2) BORE MATERIALS (u.P.V.C.)
Item No.1: uPVC Bail plug ( Bottom cap)
0 Supply of Bail plug UPVC of standard make 850.00 No.
suitable for 250 mm dia pipe
(B) LABOUR OF DRILLING
330 (A) Drilling pilot bore hole of size 250 / 300 mm at 749.00 RMT
above village site in all starata by mud flush direct
330 (B) Reaming of 250 / 300 mm dia pilot bore hole to 461.00 RMT
size 550 mm dia. including assembling, jointing,
lowering of housing casing screen pipes & other
assembly items with gravel packing and clay balls
26.84 Supply of clay balls of size 25 mm to 50 mm made 751.00 Cu
from sticky clay at site of work. Mtr
D R Kheda (Up to 300 Meter Depth) Page
33.28 Providing well sorted screened gravels at site of 2029.00 Cu
work of size ranging from 4 mm to 6 mm. Mtr
4 Supply of cement 6302.00 MT
4 (A.) Cement sealing 13273.00 Job
3 (B) Bottom sealing 6661.00 Job
Item No: 6: Lowering of Drop line & Air line
654 Lowering of 100 mm dia drop line and 32 mm dia 148.00 RMT
Air line in the Drop line to develop each water
bearing zone came across upto the depth of tube
well (depth up to 186 mt) for development of
tubewell by Air Compressor.
Item No: 7: Air Compressor
4 (A) 600 CFM / 150 PSI capacity for 200 mm dia. 22205.00 LS
Bore upto 120 Mtr. direct by compressor delivery
hose.The air compressor run for minimum
hours or up to the availability of sand free
3 (B) 900 CFM / 200 PSI capacity for 200 mm dia. 27330.00 LS
Bore above 120 Mtr. but upto 200 Mtr. direct by
compressor delivery hose.The air compressor run
for minimum 06 hours or up to the availability of
sand free discharge.
Item No: 8: Sealing of existing tubewell
150 Sealing of existing tubewell by sticky clay as per 99.00 RMT
Item No: 9: Slotting of ERW pipes
11340 (A) Slotting of ERW pipes with minimum size of 0.2400 Per
slot 6.75 cm x 6.35 xcm x 3.12 mm for 200 mm dia. slot
Pipe. i.e. 90 No. of slots/round & 12 No. of rounds
per 01 Meter length blank pipe (including
unloading of blank pipes from truck & reloading of
slotted pipes into the truck)
15120 (B) Slotting of ERW pipes with minimum size of 0.2600 Per
slot 6.75 cm x 6.35 xcm x 1.59 mm for 200 mm dia. slot
Pipe. i.e. 120 No. of slots/round & 12 No. of rounds
per 01 Meter length blank pipe(including unloading
of blank pipes from truck & reloading of slotted
pipes into the truck)
Total Schedule BII:
D R Kheda (Up to 300 Meter Depth) Page
Name of Work: Installation, Testing & Commissioning of Three Phase Submersible Pump Set Including
Providing & Fitting Required Accessories in 250 / 200 mm dia DR Bores In Various Villages of
Kapadvanj, Kathalal, Thasara and Galteshvar Taluka of Kheda District
Lowering of three phase submersible motor pump
set complete with required no.s & size & length of
column / HDPE pipes erected by means of proper
chain pulley block and pipe wrenches after
checking of threads of each pipe and coupling to
take the load of the pump set & pipe assembly filled
up with water in 250 / 200 / 175 mm dia. DR / DTH
bore of following depth.
8 A) Up to 150 meters depth. 2500.00 Job
Lifting of three phase submersible motorpump set
complete including erected size & length of column
/ HDPE pipes, cable by means of proper chain
pulley block and pipe wrenches from 250 / 200 /
mm dia. DR / DTH bore of following depth &
stacking them chronologically after checking of
threads of pipes.
2 A) Up to 150 meters depth. 2500.00 Job
Job work of fitting three phase control panel board
inclusive of carting from store to site of work and
making GEB power / motor connection etc.
complete & necessary wiring, inspection fees,
Including cost of GEB Registration charges for
connection & Charge for GEB Test report in
required format of UGVCL / MGVCL.
5 DOL (Up to 7.5 HP) / Star - Delta (From 8 to 20 640.00 Job
3 ATS (Above 21 HP & Up to 40 HP) 689.00 Job
8 Providing & fitting pipe type earthing having 150 645.00 Job
cm long and 25 mm dia G I pipe with coupling &
buch burried in specially prepared earth pit
complete with necessary 8 SWG G I earth wire
inclduing using charcoal / coke and salt in required
Earth Leakage Circuit Breaker: Supply,
installation & testing of approved make ELCB /
RCCB conforming to IS 12640 and having
sensitivity of 30 mA and short circuit withstand
capacity of 6 kA and suitable for operation on three
phase and neutral 415 V having characteristic of
D R Kheda (Up to 300 Meter Depth) Page
quick action & tripping with all advance feature &
do not incorporate any electronic component for
following max. rating.
3 25 Amps FP Cat I 1789.00 No.
2 40 Amps FP Cat I 1908.00 No.
3 63 Amps FP Cat I 2086.00 No.
Providing & fitting M S clamps fabricated from M
S plate with 03 holes on either side with nuts &
bolts of standard make and suitable size of
following size.
6 450 mm x 65 mm x 10 mm flat suitable to 50 mm M 560.70 Pair
10 450 mm x 65 mm x 10 mm flat suitable to 65/80 mm 569.10 Pair
dia. M S/ G Ipipe.
Providing & fitting bore plate made from 6 mm
thick M S plate suitable for following size of pipe.
5 Up to 200 mm dia 270.00 No.
3 Above 200 mm & up to 300 mm dia 394.00 No.
1) Sluice Valve: Supply of ISI mark C I double
flanged hand wheel / cap operated sluice valve (PD
type short body) confirming to IS 14846 of PN
of following size as per detailed specifications.
2) Reflux Valve: Supply of ISI mark C I double
flanged reflux valve confirming to IS 5312 of PN
of following size as per detailed specifications.
3) Installation, testing & commissioning of valves:
Installation of C I double flanged sluice / reflux
valve of following size in required position
including providing jointing material with required
nut bolts & giving satisfactory hydraulic testing etc.
G I Top & Bottom Set: Supply & installation of G I
top & bottom set made from M S pipe 15" long,
threaded at both ends (11 TPI on one end & 8 TPI
on other) with coupling duly welded of following
D R Kheda (Up to 300 Meter Depth) Page
M S Flange: Supply & installation of M S heavy
duty flange of following size including providing
jointing material with required nut bolts & nuts
M S Bend: Supply & installation of M S heavy
duty 900 bend of following size.
M S Coupling: Supply & installation of M S heavy
duty coupling of required thickness & length
suitable for following size.
12 1) 6 mm thick & 100 mm long for 50 mm dia. 98.70 No.
20 2) 8 mm thick & 125 mm long for 80 mm dia. 247.80 No.
300 Job work of circumferential welding of G I / M S 38.00 Job
coupling with column pipe as per detailed
specifications.
4 Job work of excavating, laying, jointing of G I / M S 737.00 Job
column pipe to rising main pipe with all required
jointing material etc complete as per detailed
specifications.
8 Providing and fitting ready made pre fabricated 12187.50 Set
portable chemicalised ferro concrete mini panel
cabin having outer size 110 cm X 50 cm X 190 cm
with necessary fitting for electrical panel & energy
meter mountig complete as per detailed
specifications & drawing.
Facing of both ends of following size M S / GI
column Pipe & threading (8 TPI)with taper ratio
1.25 & 55° thread angle including of coupling one
side with required circumferential
welding.(including unloading of pipes from truck &
reloading pipes into truck.)
30 1) 80 mm dia., Thread length 55+5 mm. 51.95 Per
D R Kheda (Up to 300 Meter Depth) Page
TOTAL FOR SCHEDULE – B III Rs.
TOTAL FOR SCHEDULE – B I +B II + B III) Rs.
In Words Rs. Twenty Two Lacs Eighty Eight Thousand Seven Hundred Thirty only.
I / We am / are willing to carry out the work at % (in Figures) (in
Words) Above / Below the tendered estimated rates mentioned above. (Strike out below whichever is not
OFFER FOR BELOW: OFFER FOR ABOVE:
Estimated Cost Rs: 22,88,730.00 Estimated Cost Rs:
Less % Deduct Rs. . Above % Add Rs. .
Net Amount (Figures) Rs. . Net Amount (Figures) Rs. .
Net Amount (In Words) Rs. Net Amount (In Words) Rs.
Signature of Contractor Executive Engineer
D R Kheda (Up to 300 Meter Depth) Page
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SD EMD GR 25-26.pdf
Price Bid Kapdwanj.pdf
DR DTPS Kheda District upto 300 Meters with Bore Materials Slotting 11.11.2025.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .