Widening and Strengthening of Amroha-Kailsa-Pakbara Road (SH-78) in Km 05(500) to 14 in Rajya Yojana (SH)

Amount

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As par morth Spe. 305(3.16) all labour, material T&P labour and all taxes complete but excluding GST

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.As par morth Spe. 305(3.16) Carted Earth upto 2 Km all labour, material T&P labour and all taxes complete but excluding GST

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. As par morth Spe. 301(3.06) all labour, material T&P labour and all taxes complete but excluding GST

Construction of granular sub-base by providing coarse graded materials, spreading with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with Vibratory roller to achieve the desired density, complete as per clause 401. As par morth Spe. B(4.01) all labour, material T&P labour and all taxes complete but excluding GST

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As par morth Spe. 305(3.16) all labour, material T&P labour and all taxes complete but excluding GST

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means. As par morth Spe. 502 (5.01) all labour, material T&P labour and all taxes complete but excluding GST

Providing and applying Tack coat with VG-10 Bitumen over Bituminous surface at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic ar per Technical Specification Clause 503. As par morth Spe. 503(5.02) all labour, material T&P labour and all taxes complete but excluding GST

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. As par morth Spe. 505(5.04) all labour, material T&P labour and all taxes complete but excluding GST

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. As par morth Spe. 505(5.07) all labour, material T&P labour and all taxes complete but excluding GST

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. As par morth Spe. 2100(12.04) all labour, material T&P labour and all taxes complete but excluding GST

Reinforced Cement Concrete grade M-25, complete in foundation all respects as per Drawings and MORTH Technical Specifications Section 1700, 1000, 2100, 2200, 2300 etc. using Batching Plant. As par morth Spe. 1500, 1700 & 2100 (12.08) all labour, material T&P labour and all taxes complete but excluding GST

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement (Sail/Tata/JSPL) in Foundation complete as per Drawing and Technical Specifications section 1600 complete in all respects. As par morth Spe. 1600 (12.43) all labour, material T&P labour and all taxes complete but excluding GST

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications complete in all respects. AS PER SI No.307 all labour, material T&P labour and all taxes complete but excluding GST

Pointing with cement mortar (1:3) on brick work in substructure as per Technical Specifications Section 1300 & 2200 etc. As par morth Spe. 1300 & 2200 (13.02) all labour, material T&P labour and all taxes complete but excluding GST

Sand Filling in Foundation Trenches as per Drawing & Technical Specification section 300 complete in all respects. As par morth Spe. 304 (12.03) all labour, material T&P labour and all taxes complete but excluding GST

Supply and Laying of 1000 mm dia NP-4 Hume pipe of Approved quality complete as per E/I all labour, material T&P labour and all taxes complete but excluding GST

Supply and Laying of 600 mm dia NP-4 Hume pipe of Approved quality complete as per E/I all labour, material T&P labour and all taxes complete but excluding GST