Loading
Loading…
Loading…
Tender ID
Tender Value
₹6.7 Cr
EMD Value
₹6.7 L
Closing Date
23 Feb 2026, 6:00 pmClosed
Executive Engineer, Navsari (R&B) Division, Navsari
Construction of New Farmer Training Centre and Office Building at Eru, Dist. Navsari
274652
34 of 2025-26
Open
Civil Works - Buildings
Works
Navsari
10 documents required · 9 mandatory · 1 optional
₹12,000
Yes
Executive Engineer, Navsari (R&B) Division, Navsari
₹6.7 L
Yes
9 Feb 2026
9 Feb 2026
9 Feb 2026
23 Feb 2026
9 Feb 2026
No figures
1 Excavation for foundation upto 1.5 m depth including 2562.00 Cumt 120.01
sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(A)
Loose or soft soil
2 Excavation for foundation upto 1.5 to 3 m depth 1374.00 Cumt 166.35
including sorting out and stacking of useful materials
and disposing off the excavated stuff upto 50 Meter
lead.(C) Dense or Hard soil
3 Filling in foundation and plinth with sand in layers of 20 168.00 Cumt 471.69
cm. Thickness including watering ramming and
consolidating etc. comp.
soil in layer of 20 cm in thickness including ramming
watering and consolidating etc. complete
5 Anti-Termite System:Providing and laying of permanent 809.00 Sqmt 63.63
piping technology anti-termite treatment before flooring
work by installing LLDP (Low linear density
polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with
inbuilt pressure compensation chip every 30 cm interval
in the tube, having working pressure of 2 Kg/cm2 and
release rate of 1.9 Itr/hour fixed by P-clips and nails.
The LLDP pipe shall be installed at the entire periphery
of the building and at internal network of building at a
depth of 20 to 200 mm under floor at every 2 to 3 mtr.
c/c distance (adjusted as per building layout ) & Ends of
loop pass through a PVC elbow of minimum 32 mm ID at
junction box of wall and floor level, entering into a steel
reinforced grooved flexible pipe of minimum 22 mm ID
leading into junction box and the loops shall terminate
in junction boxes & test every junction during injecting
chemicals for termite control treatment. The anti
termite chemical Imidacloprid 30.5% SC mix as per IS-
6313 (part III) shall be injected by the pressure pump
diluted with water @ 10.5 ml/5 ltr of water at the rate of
2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit
approved line plan for piping system and junction boxes
dully approved by Engineer-in-Charge with bond of
year warranty.(II)Anti Termite chemical injected area
(Chemical injecting incl. labour cost)
Item Rate In
Description of Item Quantity Unit Amount
No figures
6 Providing and laying controlled cement concrete M.150 380.00 Cumt 3927.44
and curing complete including the cost of formwork and
excluding reinforcement for reinforced concrete work in
(A) Foundations and plinth pcc
7 Providing and laying controlled cement concrete M.250 778.00 Cumt 4639.94
and curing complete including the cost of formwork and
excluding reinforcement for reinforced concrete work in
(A) Foundations, footings, and Mass concrete. footing
8 Providing and laying controlled cement concrete M-250 53.00 Cumt 7559.85
and curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced
concrete work in (d) columns Up to Plinth level.
9 Providing and laying cement concrete 1:3:6 (1-Cement : 154.25 Cumt 3080.90
3- coarse sand : 6- machine cut stone aggregates 40 mm
nominal size) and curing complete excluding cost of
formwork in (A) Foundation and Plinth
10 Providing and laying controlled cement concrete M-200 157.50 Cumt 7530.56
and curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced
concrete work in Columns, pillars posts and struts
G.FLOOR and F.floor
11 Providing and laying controlled cement concrete M-200 16.00 Cumt 7571.97
and curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced
concrete work in Columns, pillars posts and struts
12 Providing and laying controlled cement concrete M-250 191.00 Cumt 5996.37
and curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced
concrete work in Ground & Plinth BEAMS
13 Providing and laying controlled cement concrete M-150 140.50 Cumt 5232.81
and curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced
concrete work in plinth Slab
14 Providing and laying controlled cement concrete M.200 241.00 Cumt 6216.55
and curing complete including the cost of formwork and
excluding reinforcement for reinforced concrete work in
(C) Ground floor Beams and First floor
15 Providing and laying controlled cement concrete M.200 4.00 Cumt 6256.95
and curing complete including the cost of formwork and
excluding reinforcement for reinforced concrete work in
(C) S.floor Beams,
Item Rate In
Description of Item Quantity Unit Amount
No figures
16 Providing and laying controlled cement concrete M-200 16.50 Cumt 6640.75
and curing etc. complete including the cost of form work
and reinforcement for reinforced concrete work in (c)
Chhajja for Ground floor and first floor
17 Providing and laying controlled cement concrete M-200 1.00 Cumt 6682.16
and curing etc. complete including the cost of form work
and reinforcement for reinforced concrete work in (c)
Chhajja S.floor
18 Providing and laying controlled cement concrete M-200 10.50 Cumt 8653.68
and curing etc. complete including the cost of form work
and reinforcement for reinforced concrete work in (c)
Lintal for Ground floor and first floor
19 Providing and laying controlled cement concrete M-200 1.00 Cumt 8695.09
and curing etc. complete including the cost of form work
and reinforcement for reinforced concrete work in (c)
Lintal for S.floor
20 Providing and laying controlled cement concrete M.200 235.00 Cumt 6619.54
and curing complete including the cost of formwork and
excluding reinforcement for reinforced concrete work in
(C) Ground and first floor Slab
21 Providing and laying controlled cement concrete M.200 4.00 Cumt 6659.94
and curing complete including the cost of formwork and
excluding reinforcement for reinforced concrete work in
(C) Second Floor slab
22 Providing and laying controlled cement concrete M-200 14.50 Cumt 7098.28
and curing etc. complete including the cost of form work
and excluding the cost of reinforcement etc. complete in
(E) Stair case for Ground Floor to first floor and first
floor to second
23 Providing and fixing 90 cm high Stainless steel railing 84.00 Rmt 3719.83
made from anticorrocive 304 grade S S pipe of 50 mm
dia (16Gauge) as hand rail with S S 304 grade Baluster
of 38 mm dia (16Gauge) as a vertical support fixed in
RCC slab at 1.2m c/c including three horizontal S S
pipes of 25 mm dia (16Gauge) at eqal distance fixed by
18.75 mm dia (16Gauge) S S pipe with baluster
including accessories as per detailed drawing as
directed etc. complete.
24 Providing TMT FE 550D bar reinforcement for RCC work 220967.50 Kg 95.04
including bending & placing in position complete up to
All floor Level
Item Rate In
Description of Item Quantity Unit Amount
No figures
25 Providing and fixing eco-friendly light weight calcium 421.00 Sqmt 1674.15
silicate false ceiling tiles having Tegular edge & 15 mm
Thick Densified edges on the Tile Periphery for Extra
Strength The Light weight calcium silicate ceiling tiles
shall have, light reflection 85% non-combustible as per
B.S. 476 part IV, 100% humidity resistance and also
having thermal conductivity0.043° w/m KC.for the best
thermal Insulation. The Light weight calcium Silicate tile
shall be of approved texture Fine fissured/ Spintone/
Cosmos having NRC value of 0.5 & Globe having NRC
value of 0.75 NRC or equivalent of size 595 X 595 mm to
be laid on true horizontal level suspended inter locking
metal grid of hot dipped galvanized steel sections
(galvanizing @120 grams per sqm including both side)
consisting of main ‘T’ runner suitably spaced at joints to
get required length and size of 24 X 38mm made from
0.30 mm thick (minimum) sheet, 1200mm centre to
centre, and cross ‘T’ of size 24 X 28mm made out of
0.33mm (Minimum) sheet spaced 1200mm along
spaced between main 'T' at 600mm centre to centre to
form agrid of 1200x600mm and size 24x48mm made of
0.30mm thick (Minimum) sheet to be interlocked at
middle of the 1200x600mm panel to form grid of size
600x600mm resting on periphery walls/partitions on a
perimeter wall angle pre-coated steel of size
(24x24x3000mm made of 0.40mm thick (minimum)
sheet with the help of rawl plugs at 450mm centre to
centre with 25mm long dry wall screws @ 230mm
26 Brick work and laying
using 15mm
common thick densified
burnt edges light
clay building bricks 83.00 Cumt 4121.55
having crushing strength not less than 35 kg/sq.cm. in
foundation and plinth in cement mortar 1:6 (1 cement :
6 fine sand) Conventional
27 Brick work using common burnt clay building bricks 644.50 Cumt 4403.40
having crushing strength not less than 35 Kg/Sq.cm. in
super structure above plinth level upto floor two level in
cement mortar 1:6 (1cement : 6 fine sand) Conventional
Ground floor & First floor
28 Brick work using common burnt clay building bricks 9.00 Cumt 4444.59
having crushing strength not less than 35 Kg/Sq.cm. in
super structure above plinth level upto floor two level in
cement mortar 1:6 (1cement : 6 fine sand)Conventional
{Second floor}
29 Half brick masonry in common brunt clay building 480.00 Sqmt 669.34
bricks having crushing strength not less than 35Kg/Sm.
In C.M 1:4( 1cement : 4 coarse sand) in super structure.
Conventional for Ground floor & First floor
Item Rate In
Description of Item Quantity Unit Amount
No figures
30 Half brick masonry in common brunt clay building 140.00 Sqmt 675.49
having crushing strength not less than 35Kg/Sm. In C.M
1:4( 1cement : 4 coarse sand) in super
structure.Conventional for Second Floor
31 Providing and fixing 150 mm wide, approved quality 968.00 Sqmt 295.12
chicken wire mesh at junction of brick work and RCC
work or two dissimilar surfaces, at all heights fixed by
nails, rowal plugs or tag by cement mortar 1:3 before
applying the plaster, including curing, s
32 Providing 15mm thick cement plaster in single coat on 4434.00 Sqmt 182.15
Rough (Similar)side of single or half brick walls for
interior plastering upto floor two level and finished even
and smooth in (ii) Cement mortar 1:4 (1-cement :4-
sand) for G.Kloor and F. Kloor
33 Providing 15mm thick cement plaster in single coat on 241.00 Sqmt 209.54
Rough (Similar)side of single or half brick walls for
interior plastering upto floor two level and finished even
and smooth in (ii) Cement mortar 1:4 (1-cement :4-
sand) for S. Kloor
34 Providing 10 mm. Thick smooth cement plaster in 1546.00 Sqmt 204.96
single coat for plastering on ceiling and soffits of stairs
and finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) with floting coat of neat cement
slurry etc. complete.Ground Floor & First Floor
35 Providing 10 mm. Thick smooth cement plaster in 25.00 Sqmt 228.94
single coat for plastering on ceiling and soffits of stairs
and finished even and smooth in : (I) Cement mortar 1:4
(1 cement : 4 sand) with floting coat of neat cement
slurry etc. complete. Second Floor
36 20mm thick double coat sand faced cement gutka 4393.00 Sqmt 339.15
plaster on walls upto height 10 metres above ground
level consisting of 12mm thick backing coat of C.M. 1:3
(1-cement : 3-sand) and 8mm thick finishing coat of C.M.
1:1 (1-cement : 1-sand) including 1cm x 1cm grooves
etc. complete.
37 Providing throating or plaster drip and moulding to 238.00 Rmt 43.22
R.C.C. Chhajja.
38 Applying two coats of putty & two coats of primer of 5752.00 Sqmt 40.59
approved brand and manufacture on new wall surface to
give an even shade including thoroughly brushing the
surface free from mortar dropping and other foreign
matter and sand papered smooth.
Item Rate In
Description of Item Quantity Unit Amount
No figures
39 Wall painting (two coats) with plastic emulsion paint of 4185.00 Sqmt 81.05
approved brand and manufacture on undecorated wall
surface to give an even shade including throughly
brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
40 Wall painting (two coats) with plastic emulsion paint of 1567.00 Sqmt 86.60
approved brand and manufacture on undecorated
ceiling surface to give an even shade including throughly
brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
41 Finishing wall with Weather proof exterior 100% acrylic 4650.00 Sqmt 117.40
emulsion paint With one coat of primer on wall surface
to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, and remains of
loose powdered materials.etc complete for All floor
42 Providing And filling with good quality cinder(steam 61.00 Cumt 581.76
coal) as directed by engineer in charge in sunks in layers
of 15 cm thick,including watering,placing ,ramming well
etc as directed, for all floor.
43 Providing and laying water proofing treatment by 238.00 sqmt 1014.04
conventional method including cleaning the slab surface
by wire brush as directed including provding first layer
of C.M. 1:4 of 40 mm thickness mixed with water
proofing compound at rate prescribed by manufacturer,
including putting of brick bats of average thickness
mm Well immerssed in water laid uniformly on first
layer of mortar including applying cement slurry @ rate
of 0.08 bag/sqm. on fixed layer of brick bats including
maintaining necessary slope, in second layer 40 mm
thick C.M 1:4 mixed with water proofing compound as
directed, including finishing smooth with cement slurry
as directed complete.
44 Providing and laying controlled cement concrete M-200 54.00 Cumt 5368.15
for RCC work and curing complete including the cost of
form work but excluding the cost of reinforced concrete
work in coping on Ground Floor and first floor
45 Providing and laying controlled cement concrete M-200 18.00 Cumt 5409.56
for RCC work and curing complete including the cost of
form work but excluding the cost of reinforced concrete
work in coping on 2nd Floor
Item Rate In
Description of Item Quantity Unit Amount
No figures
46 Providing and fixing window having extruded 146.00 Sqmt 1713.70
aluminumColour anodized section frame main outer size
63.50 x38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,
horizontal two track member size 61.85 mm x 31.75 mm
x 1.20mm @wt.of 0.695 Kg/mt, vertical member of size
with slidingshutters of horizontal member size 40mm x
18mm x1.29mm @ wt.of 0.456Kg/mt, vertical member
of size40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @
Wt.0.457 Kg/mt with 5 mm thick transparent bronze
colour float glass with powder coated aluminum fitting
sand fixtures and transparent silicon sealant glass fixing
to frame as per details etc complete for window.
47 Providing and fixing window having extruded 15.00 Sqmt 1583.95
aluminumColour anodized section frame main outer size
horizontal Three track member size 92mm x 31.75mm x
1.30mm,@Wt.1.07 Kg/mt , vertical member of size
92mm x31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with
slidingshutters of horizontal member size
mmx18mmx1.29mm @ wt.of 0.456 Kg/mt, vertical
member of size40mm x 18mm x 1.29 mm @ wt.of
0.456Kg/mt/ with 5mm thick transparent bronze colour
float glass with powder coated aluminum fittings and
fixtures and transparent silicon sealant glass fixing to
frame as perdetails etc
48 Providing and fixing window having extruded aluminum 10.00 Sqmt 1525.00
Colour anodized section frame of size 63.50 x 38.10 x
1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized
alluminium frame with 5 mm thick transparent bronze
colour tinted float glass as with powder coated
aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as perdetails etc details etc
complete for Fix window
49 Providing & Fixing in position standard extruded 16.00 Sqmt 1975.76
approved colour anodised Aluminum Ventilation with
outer frame 65 x 25 x 1.50 mm Frame @ Wt
kg/Rmt with 3 mm thick fixed Bajari glass a alluminium
strip blade fixed or adjestable ventilation,Fixed glass,
exhuast fan including all required materials, fixtures,
fastenning, labours and equipments as per detailed
drawing as directed. For Ventilation
Item Rate In
Description of Item Quantity Unit Amount
No figures
50 Providing and fixing Double shuttered door with side 18.00 Sqmt 4028.89
fixed ventilation having frame granite stone with flat
edge polished with standard extruded colored anodized
aluminum section main frame outer size 127mm x
38.10mm x 1.35mm (weight - 1.384 kg/rmt.). Openable
shutters and 50mm thick double shutter flush door solid
core finished with 1mm thick lamination on both sides
colored and pattern approved by this office with fixed
glazing on sides. Door shall be provided with floor
spring and 60cm long S.S. handle and Locking system
and S.S. fixtures & fastenings etc. directed by engineer in
51 Providing and fixing single shuttered Door having frame 97.50 Sqmt 4841.94
of granite stone with flat edge polished with standard
extruded colored anodized aluminum section main
frame outer size 127mm x 38.10mm x 1.35mm (weight -
1.384 kg/rmt.). Openable shutters and 35 mm thick
single shutter flush door solid core finished with 1mm
thick lamination on both sides colored and pattern
approved by this office with fixed glazing on sides. Door
shall be provided with floor spring and 60cm long S.S.
handle and Locking system and S.S. fixtures &
fastenings etc. directed by engineer in charge.
52 Providing and fixing FRP frame size 100x50 mm and 40.00 Sqmt 2377.76
28mm thick FRP depress panel shutter having extra
reinforcement on sides & edges in Gel coat finish. The
core of the shutter & frame is to be filed up with injected
fire retardant grade polyurethene foam done in situ
alongwith embedded wooden pieces for stiffening & also
taking hinges & fintures. The whole FRP frame & shutter
is to be water proof weather proof, termite proof &
resistance to mild acid/alkali. Rates are to be inclusive
of S.S hinges with necessary screws & alluminium
fixtures & fastenings & fastener sleeve.
53 P & L 60x60 cm' Anti skid vitrified 8 mm thick tile for 780.00 Sqmt 1399.86
flooring of cement mortar 1:6 (1cement : 6 coarse
sand)and jointed with by adhesive materials including
colour cement slurry including finished with flush
pointing & cleaning the surface etc. complete for
including two colour pattant colour approved by
54 P & L 60x60 cm' Anti skid vitrified 8 mm thick tile for 20.00 Sqmt 1457.43
flooring of cement mortar 1:3 (1cement : 3 coarse
sand)and jointed with by adhesive materials including
colour cement slurry including finished with flush
pointing & cleaning the surface etc. complete for
including two colour pattant colour approved by
Item Rate In
Description of Item Quantity Unit Amount
No figures
55 P & L 60x60 cm machine polished Blue Kota Stone slab 472.50 Sqmt 1079.41
flooring over 20 mm (average)thick base of cement
mortar 1:6 (1-cement 6-coarse sand) or L.M 1:1.5 (1
Lime putty : 1.5 coarse sand laid over and jointed with
grey cement slurry mixed with pigment to match the
shade of slab including rubbing and polishing
etc.complete (A) 30mm thick
56 P & L 60x60 cm machine polished Blue Kota Stone slab 91.50 Sqmt 1089.18
30 mm thick in riser of steps,skirting dedo and pillars
laid on 10 mm thick cement mortar 1:3 (1-cement 3-
coarse sand) and jointed with grey cement slurry mixed
with pigment to match the shade of slab including
rubbing and polishing etc.complete(30 mm thick)
57 P & L Mate Finished antiskid ceramic tiles 30x30 cm 254.00 Sqmt 994.32
size 6 mm thick in flooring treads of steps and landing
laid on a bed of 12 mm thick cement mortar 1:3(1-
cement:3-coarse sand)finishing with flush pointing in
white cement
58 Providing and laying coloured glazed tiles 6mm thick in 583.00 Sqmt 940.18
flooring treads of steps and landing laid on a bed of
12mm thick cement mortar 1:3 (1-cement : 3-coarse
sand ) finishing with flush pointing in white cement.
59 P & L premium printed glazed tiles tiles size 30 x 60 cm 276.00 Sqmt 1477.25
6 mm thick in skirting risers of steps and dedo on
mm thick cement plaster 1:3 (1-cement:3coarse sand)
and jointed with colour cement slurry
60 Providing Plinth Protection to Building including 235.00 Sqmt 2465.92
excavation in ordinary soil and laying cement concrete
1:3:6 using stone aggregates of 40mm nominal size in
foundation layer 125 mm thick+ 125mm thick sand
layer below pre-cast Rubber Dye inter locking concrete
block 60mm thick with grade of concrete M300
pneumatic compressed by mechanically pressed and as
per approved design including 75mm Sand layer for
levelling and filling the joint with sand in proper line and
level etc. complete, Including Providing and fixing pre-
cast concrete kerb stone of grey cement based concrete
block 30cm length, 30cm height and 15cm thick made of
M250 grade concrete as per approved design and
including excavation for fixing in proper line and level,
filling the joint with C:M 1:3 (1cement:3 fine sand) etc.
Item Rate In
Description of Item Quantity Unit Amount
No figures
61 Providing and laying broken chine mosaic flooring for 877.00 Sqmt 765.97
terrace using 12 mm to 20 mm broken pieces of glazed
tiles to be laid over cement mortar 1:3 to plain or slope
and to be tempered to bring mortar creme out upto
surface using white cement including rounding off
junctions and extending them upto 15 cm along the
wall,clearing with water and oxalic acid etc. as directed
62 Providing and laying cement concrete flooring 1:2:4 (1- 877.00 Sqmt 370.13
cement : 2-coarse sand : 4-graded stone aggregate
20mm nominal size) laid in one layer and finished with a
floating coat of neat cement. (A) 50mm thick.
63 Providing and fixing polished 18 mm thick Granite stone 318.00 Sqmt 2477.53
with full round edge and polished of approved quality in
clading on sill and around the doors/ windows/
ventilation with 20 mm thick cement plaster CM (1:4)
and fixing with cement slurry & adhesive including
moulding of exposed edges as directed by engineering in
charge etc. complete.
64 Providing and fixing M.S Safty Grills having 16mm MS 191.00 Sqmt 3431.68
bar Horizontally at every equal 0.10m C/C distance and
2 no of bar Vertically at every equal 0.375m C/C
distance Fixing on around (5x40) mm Solid MS Patti
including cutting, welding and fabrication etc; including
one coat of primer of approved quality and two coats of
oil painting as per detail drawing etc. complete as per
directed Engineer in charge.
65 Providing erecting and fixing double coated Syntex PVC. 15000.00 Litre 3.95
(ISI) water tank of required capacity each with all
necessary fittings and connection etc. complete on
66 Providing laying and jointing in true line and level 90.00 Rmt 195.67
50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings make as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
67 Providing laying and jointing in true line and level 70.00 Rmt 148.12
40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings make as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Item Rate In
Description of Item Quantity Unit Amount
No figures
68 Providing laying and jointing in true line and level 180.00 Rmt 91.84
25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings make as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
69 Providing laying and jointing in true line and level 160.00 Rmt 72.65
15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings make as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
70 Providing, laying and jointing in true line and level 160 120.00 Rmt 834.38
diametre U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber
ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size
mm diametre x 210 mm length x 196 mm heigh at every
2000 mm center to center or shall be concealed in walls
as directed including necessary fittings such as bends,
shoes etc. including testing of pipes and joints and
jointed with adhesive solvent cement including cost of
all materials.
71 Providing laying (to level or slopes) and jointing 527.00 Rmt 678.01
reinforced concrete Light duty non-pressure pipes I.S.
class NP2 of the following internal diameter with collars
and butt ends prepared for collar joints including testing
of joints complete.(D)
72 Providing, laying and jointing in true line and level 110 126.00 Rmt 857.65
diametre U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber
ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size
mm diametre x 149 mm length x 145 mm heigh at every
2000 mm center to center or shall be concealed in walls
as directed including necessary fittings such as bends,
shoes etc. including testing of pipes and joints and
jointed with adhesive solvent cement including cost of
all materials.
Item Rate In
Description of Item Quantity Unit Amount
No figures
73 Providing, laying and jointing in true line and level 75 50.00 Rmt 292.90
mm dia. UPVC SWRType B pipe conforming to IS 13592-
1992 with one end plain and other end socketed with
rubbering and fitting conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp at every
mm c/c or shall be conceled in walss as directed
including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
74 Providing and fixing in PVC SWR cowel went 75mm dia 5.00 No 15.66
to pipes.(B) 75mm dia.
75 Providing and fixing in PVC SWR cowel went 110mm 16.00 No 28.79
dia to pipes.(B) 110mm dia.
76 Providing and fixing PVC SWR Nahni trap IS 14735 for 56.00 No 585.37
drain - 100 mm diameter with jali of the following
nominal diameter of self cleansing design with C.I scread
down or hinged grating including the cost of cutting and
making good the walls.
77 Providing and fixing wash down water closet (European 17.00 No 2983.54
type W C pan) with integral P and S trap including
jointing the trap with soil pipe in cement mortar 1:1 (1
cement five sand) including providing and fixing plastic
seat cover for wash down WC with CP brass hinges and
rubber buffers back plastic seat and including providing
and fixing PVC flushing tank with a pair of C I or MS
bracket with complete fitting such as lead valve siphon
15 mm dia brass ball valve with polythene float CP brass
handle unions and couplings for connection with inlet
out let and over flow pipes 40 mm dia porcelain
enameled flush bend including cutting holes in walls and
making good the same connection the flush bend with
cistern and closet vitreous china.
{Hindustan, Cera, Parryware or equivalent }
78 Providing and fixing Urinal of approved quality 9.00 No 2580.55
including connection with trap and with integral
longitudinal flush pipe.(A) Squating plate pattern white
earthenware 550mm x 300mm.
79 Providing and fixing polished 18 mm thick black granite 16.00 Sqmt 2603.17
with full round edge and double side polished of
approved quality in between urinal and fixing with
cement slurry & adhesive including moulding of both
exposed edges as directed by engineering in charge etc.
80 Providing and fixing brass screw down stop tap.(A) 43.00 No 205.83
Item Rate In
Description of Item Quantity Unit Amount
No figures
81 Providing and fixing ball cock of approved. quality as 3.00 No 189.84
directed.(A) Copper Metal (ii) 50mm dia.
82 Providing and fixing washbasin with single hole for 23.00 No 1619.87
pillar tap with C.I. or M.S. brackets painted white
including Rubber plug, sutting holes and making good
the same but excluding fittings and also including rate of
C.P. brass waste for washbasin or sink (A) 32mm dia.
and M.I. fisher union for washbasin or sink. (A) 32mm
dia.; (A) Vitreous China:(ii) Flat Back washbasin
mm x v 400mm size. (i) In white colour.
83 Providing and fixing 600mm x 450mm bevelled edge 18.00 No 851.13
mirrror of superior glass mounted on 6mm thick A.C.
sheet or plywood sheet and fixing to wooden pluge with
C.P. brass screws and washers.
84 Providing and fixing C.P. brass towel rail comlete with 18.00 No 616.42
C.P. brass brackets fixed to wooden plugs with C.P. brass
scews (B) 600mm x 20mm size.
85 Providing and fixing screw down bib taps of following 50.00 No 214.81
size.(A) Brass screw down bib tap polished bright. (i)
86 Providing and fixing pillar tap, capstan head, screw 23.00 No 308.73
down high pressure with screws, shanks and back nuts.
(i) 15mm dia.
87 Providing and fixing in position 300 mm high, 150 mm 120.00 No 707.00
wide English letters made from 1.0 mm thick stainless
steel sheet as directed by Engineer in charge with all
necessary tools & plants etc. complete.
88 Providing and fixing Rubber plug for sink or wash basin. 23.00 No 17.15
89 Providing and fixing chromium plated brass half trun 18.00 No 263.77
flush cock of approved quality including fixing in pipe
line etc. complete (ii) 25mm dia.
90 Providing and fixing S.W. gully trap with C.I. grating 20.00 No 1246.92
brick masonry chamber and water tight C.I. cover with
frame of 300mm x 300mm size (inside) with standard
weight (i) Square mouth traps (B) 150mm x 100mm size
P or R type
91 Constructing brick masonry chamber for underground 26.00 No 3172.41
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5
precast RCC cover 455mm x 610mm intenal dimensions
with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-
coarse sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm thick
with cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete (i) Inside dimensions 455mmx 610mm and
450mm deep for single pipe line.
Item Rate In
Description of Item Quantity Unit Amount
No figures
92 Constructing brick masonry chamber for underground 22.00 No 3883.45
C.I. Inspection C.I. Inspection chamber and bends with
briocks having croshing strength not less than 35Kg.
Cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm
intenal dimensions with frame (R.C.C. top slabe with
1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3 finished
smooth with a floating coat of neat cement on walls and
bed concrete etc. complete (i) Inside dimensions
500mmx 700mm and 450mm deep for single pipe line.
93 Extra over items for every additional depth of 0.1M. of 18.00 Each 242.39
part thereof beyond 450mm depth for Brick masonry
chamber.(i) for 455mm x 610mm size.
94 Extra over items for every additional depth of 0.1M. of 14.00 Each 264.86
part thereof beyond 450mm depth for Brick masonry
chamber.(i) for 500mm x 700mm size.
95 Providing cement vata (10cm x 10cm size) quarter 140.00 Rmt 24.28
round in cement mortar 1:1 including neat cement
finishing watering etc. Complete
96 Providing and fixing MS Ladder of required pattern with 300.00 Kg 114.13
MS flats(30x3mm) or round or square bars (12mm) at
required spacing & with round headed bolts and nuts or
screws or welding including primer coat of approved
quality and two coats of oil paintas as directed by
engineer in charge
97 Providing and fixing in position 150 mm high, English 100.00 No 404.00
letters made from 1.0 mm thick stainless steel sheet as
directed by Engineer in charge with all necessary tools &
plants etc. complete.
98 Constructing Platform of 18 mm thick Polished Black 3.00 Sqmt 6235.74
Granite at top and 25 mm thick Kota stone slab one side
polished at bottom with cementing Materials / adhsives
including makeing necessary grooves in walls with
Vertical sandwich two Kotastone 25 mm support every
60 cm centre to centre or as required including all
labour material of approved quality incl. full moulded
round front edge granite strip of one side polished and
jointed with grey cement slurry including rubbing and
polishing etc. complete for all floors
Item Rate In
Description of Item Quantity Unit Amount
No figures
99 Providing and fixing pre-cast Rubber Dye / steel Dye 1017.00 Sqmt 704.07
inter locking concrete block 60mm thick with grade of
concrete M300 pnumatic compressed / vibrated
mechanically and as per approved design Confirming to
IS 15658 : 2006 including 35 mm Sand layer for levelling
and filling the joint with sand in proper line and level as
per guidlines of IRC : SP 63-2018 etc. Complete.
100 Providing and fixing 0.60 meter wide Drinking platform 9.00 Sqmt 2831.03
including supplying and fixing granite stone of black or
equivalant quality 18 mm thick mirror polished on top
and side posiition and vertical strip at front with
cement slurry & adhesive including moulding of both
exposed edges over 25 mm thick kotah stone platform
fixing in top and sides and itermediates supports fixing
with cement mortar and adhesive and finishing all
material and labour and assessories with necessary
fitting complete etc.
101 Constructing Kitchen Platform of 18 mm thick Polished 17.00 Sqmt 4193.52
Black Granite at top and 25 mm thick Kota stone slab
one side polished at bottom with cementing Materials /
adhsives including makeing necessary grooves in walls
with Vertical sandwich two Kotastone 25 mm support
every 60 cm centre to centre or as required including all
labour material of approved quality incl. full moulded
round front edge granite strip of one side polished and
jointed with grey cement slurry including rubbing and
polishing etc. complete for all floors
102 Providing and fixing 25 mm thick polished kota stone 27.00 Sqmt 667.61
Shalve with full round edge and double side polished of
any required and fixing with cement slurry & adhesive
including both exposed edges cut and Smooth Finished
as directed by engineering in charge etc. complete.
103 Providing and fixing Kitchen sink with C.I. or M.S. 1.00 Nos 3640.04
brackets, painted white including cutting holes in walls
and making good the same but excluding fittings. (C)
Vitreous China Sink.(i) 600mm x 450mm x 150mm size
104 Providing and fixing Kitchen platform trolley having 7.00 Sqmt 12364.42
three drawers of SS (IS 304) of required size like thali,
katleri, perforated, partition, cupsosar type in kitchen
platform having drawer front side and backside by using
19mm thick all proof plywood of ISI quality all side
laminated etc. as directed. The size of SS (IS 304) basket
of size 4" to 18" for thali, dish, katleri, perforated,
partition, cupsosar type as directed including necessary
S.S. fittings, handles, nobs, telescopic channels, etc. as
Item Rate In
Description of Item Quantity Unit Amount
No figures
105 Providing and fixing coloured self adhesive PU-Tactile 33.00 Sqmt 4791.44
tile, ground surface indicators of Polyurethane) of size
300mm x 300mm for guiding/warning to the visually
visitors in the centre/side of the pedestrian/approach
pathway as per specification and guidelines complete in
all respect to the entire satisfaction of in charge.
106 Providing and fixing acrylic multilingual Braille (raised 20.00 Nos 1765.48
dots) DIRECTIONAL SIGNBOARDS of size 225 x 150mm
designed as per accessibility standards and having
3.5mm thick acrylic base plate with Upper Case San Serif
words made of white acrylic non glare cut out letters of
height 15mm raised not less than 0.8mm above base
plate and the equivalent word written in Hindi with
Devanagari non glare acrylic letters of height 15mm
raised not less than 0.8mm above base plate and having
a non-glare acrylic cut arrow pointing in the required
direction. Each signboard to be fixed as per
manufacturers specifications on the wall at the
approved location and at a height of 1200mm from FFL
complete as per design / specifications and guidelines as
per the entire satisfaction of the Engineer-in-charge
107 Providing & Fixing Braile Indicator Of Size 170 Mm X 45.00 Rmt 946.37
35mm For Handrails Of The Approved Design And
Make Have Braile Dots Raised 0.5 Mm Above Base Plate
To Be Installed At Specific Locations As Per Direction Of
Engineer In Charge
108 Providing and fixing of conspectus tape 50mm width on 34.00 Rmt 304.01
of treads in staircase including cutting pasting etc. As
per harmonised guidelines complete in all respect to the
entire satisfaction of engineer in charge.
109 Providing and Fixing a set of wall mounted 38 mm dia U 2.00 Set 2730.03
shaped horizontal stainless steel collapsible grab bar
38mm vertical stainless steel fixed grab rail of grade SS
304 from round pipe supported and 75 mm dia 8 mm
thick SS 304 base flange on wall including anchor
fasteners, nuts, accessories as per detailed drawing etc.
complete as directed by Architect or Engineer in charge.
110 Providing and fixing EURONICS 304 Stainless Steel 6.00 Nos 3368.35
Handicap Grab Bar, Size 600 millimeter, including all
necessary fittings and fixtures, complete as per the
direction of the Engineer-in-charge.
111 Providing and laying controlled cement concrete M.200 39.00 Cumt 8881.94
and curing complete excluding the cost of formwork and
reinforcement for reinforced concrete work in (B) Walls,
from top of foundation level upto floor two level
Item Rate In
Description of Item Quantity Unit Amount
No figures
112 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 4.00 Nos 958.17
size having weight not less than 35Kg.
113 Providing & erecting open well horizontal mono block 2.00 Nos 36107.50
pump set with cast iron body, complete for three phase
submersible motor having [H]For 15 H.P,3 phase open
well horizontal mono block pump set suitable for
LPM to 1025 LPM @ 33 to 42 MTR head suitable for
65/80 mm dia delivery pipe
114 Supplying & erecting approvedmake 3 phase motor 2.00 Nos 19695.00
control cubicalpanel (Star-Delta) made from 16G.CRCA
sheet duty painted with epoxy powder painted inside
and outside with hinged doors and locking arrangement,
consisting suitable size of ON-OFF isolator (AC-
3/23duty) main fuses,single phasing preventer cum
water level, Guard(Compe unit), Toggle switch to by
pass Single phase preventercum WLG,indicating lamps
forR-Y-Bphases, over load relay.Automatic water level
controller, Ammeter &Voltmeter each with two way
Crimped,Panel to be erected on angle iron frame grouted
on wall as overload relay,thermal/Electronics star delta
cutoff timer,start-stop push buttons.The isolator
overload relay &cntractors ofL&T,Siemens or Cuttler
Hamer make only.Panel to be erected on angle iron
frame ground on wall (e)S/D upto 2.5 H.P.
115 Providing and fixing rolling shutters of approved make 10.00 Sqmt 3554.40
made of 80 mm wide M.S laths inter-locked together
through heir entire length and jointed together at the
ends by end locks mounted on specially designed pipe
shaft with bracket plates,guide channels and
arrangement for inside and outside locking with push-
pull operation including the cost of hood cover and sprig
etc.complete(A) Shutters having width below 3.5M
116 Excavation for foundation for depth from 3.0 m to 5.0 m 17.00 Cumt 178.58
including sorting out and stacking of useful materials
and disposing off the excavated stuff upto 50 Meter
lead.(B) Dense or Hard soil
Item Rate In
Description of Item Quantity Unit Amount
No figures
117 Constructing brick masonry chamber for underground 4.00 No. 7180.44
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.
cover with frame (Light duty) 455mm x 610mm intenal
dimensions, total weight of cover with frame to be not
less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame
15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-
coarse sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm thick
with cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete.(iii) Inside dimensions 600mm x 850 mm
and 450mm deep for pipe lines with three or more
118 Box cutting the road surface to proper slope and camber 603.00 Cum. 106.80
for making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead.
119 Filling in plinth with sand under floors including 165.00 Cum. 354.51
watering ramming, consolidating and dressing complete
120 Construction of granular sub-base 150 mm thick by 224.00 Cum. 602.97
providing coarse graded machine crushed B.T. material
satisfying MOST specification of grading I (B.T. stone
aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm -
% and 2.36 mm below - 20 % )including spreading in
uniform layer with motor grader on prepared surface,
mixing by mix in place method with rotavator at OMC
and compacting with vibratory roller to achieve the
desired density etc. complete.
121 Providing and laying wet mix macadam base course 250 275.00 Cum. 659.53
mm thick using machine crushed B.T. chips as per
required gradation mixing with required optimum
quantity of water, conveying the mix to site of work,
spreading in to grade and camber with mechanical
paver and consolidation each layer with vibratory roller
including cost of material labour plant and equipment
etc. complete.
122 Compaction and finishing of cement concrete road by 1044.00 Sqm. 63.63
trimix M.250 process providing extra Labour charges for
the trimix vacume dewatering service process on
cement concrete road sutface by using vacuum
dewatering pump floater surface vibrator including
making groves and rough finish to surface including
leveling etc complete.
Item Rate In
Description of Item Quantity Unit Amount
No figures
123 Providing and fixing pre-cast concrete kerb stone of gray 374.00 Rmt. 370.68
cement based concrete block 30cm length,30cm height
and 15cm thick of M250 grade concret as per approved
design and including excavation for fixing in proper line
and level,filling the joint with C:M 1:3 (1cement:3fine
sand) etc complete.
124 Drilling of min. 250 mm dia. bore hole in all strata 100.00 Rmt 1270.58
including dualover burden strata by combination
DR/DTH rig including lowering 200 mm dia MS ERW
pipes in bore hole and testing etc.all work as per
directed engineer incharge.
125 Manufacture, supply and delivery of cage 70.00 Rmt 1682.66
typeTrapezoidal shape ( ' V ') wire wound low carbon,
Galvanized screen pipe and Stainless Steel Screen pipes,
confirming IS: 8110 For (B) 200mm dia 1) 1.00mm Slot
126 Bore plug having 100 mm height made from M.S. plate 1.00 No 1161.62
with 3 holes at equal distance on circumference for nut-
bolts type, locking arrangement with nuts-bolts & lock
nuts of std. Make complete. For 250mm dia
127 Providing PVC insulated flat submersible cable as per 120.00 Rmt 180.79
detailed technical specifications of R/C of GWSSB
conforming to IS 694, IEC 60227 / 60228.d)1 R x 3 C x
128 Suppling and installing 3 Phase Borewell 15.00 HP 1.00 No 37160.93
Submersible Pump Sets Electric motor driven
conforming to I.S. 8034 and motor conforms to IS-9283
working at 3 phase 400/440 volt 50 C/S A.C. supply &
2900 R.P.M. cat
129 Providing and fixing check or non return pully wheel 1.00 No 1111.00
valve of 50 mm diameter.
130 Providing and fixing to wall,ceiliing and floor galvanised 120.00 Rmt 794.18
mild steel tubes ( Medium grade ) of the following
nominal bore, tube, fittings and clamps included making
good the wall, ceilling and floor (F) 50 mm
131 Providing and fixing to wall ceiling and floor 10.0 Kg. 150.00 Rmt 339.05
F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall clipsetc.
including making good the wall ceiling and floor.(G)110
132 Providing and fixing to wall ceiling and floor 10.0 Kg. 130.00 Rmt 696.90
F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall clipsetc.
including making good the wall ceiling and floor.(G)160
Item Rate In
Description of Item Quantity Unit Amount
No figures
133 Providing junction for rain water juncton chamber of 12.00 Nos. 8973.85
size 0.60x0.60x0.75m with excavation of size 1.96x1.96
m & 0.15m thick c.c.1:2:4 bed concrete including brick
masonary wall in CM 1:6 of 0.75m height & 0.23m thick
with 15mm thick cement plaster inside & outside &
1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS
steel and 0.60mx0.45m cast iron manhole cover with
frame weight not less than 35 kg as per directed by
Engineer-in-charge
134 Providing Filter chamber of Brick work in C:M 1:6 of size 2.00 Nos. 15206.56
2.06mx1.20m x1.20m & excavation dimension of
2.66mx 1.81x1.35m including C.C 1:2:4 bed concrete of
0.15m thick including brick work in c.m 1:6 for 23cm
thick wall including 15mm thick cement plaster inside &
outside with cement slurry & 10cm thick RCC 1:2:4 top
cover with frame of minimum weight of 35 kg & filling
filter material kapchi in layers (25-40mm & 10-20mm)
& BT metal 40mm & sand as per directed by Engineer-
in-charge.
135 Providing Recharging pit of size 2.0m Dia.& 2.0m depth 2.00 Nos. 8270.89
of water logging with excavation filling the pit with
gravel & sand in layers including making 300mm dia
bore depth of 4.5mt & above concrete with kapchi in
layers (25-40mm & 10-20mm) & BT metal 40mm &
filling brick as directed by Engineer-in-charge.
136 Constructing providing and fabricating cattle guard 15.00 Sqmt 5071.21
using channel section frame of size ISMC series 100 mm
x 50 mm (Weight 9.20 kg/Rmt) and ISMC section
mm x 75mm (weight 11.50 kg/Rmt) intermediate
support for welding G.I.pipe at 12 Cm C/C of size 50 mm
in a frame made of Channel section size 100 mm x
mm all round including fixing the unit on prepared
chamber of masonary wall using MS hold fast embeded
in masonary wall top as directed by Engineer in charge
and as per drawing and necessary required arrangement
etc complete.
Item Rate In
Description of Item Quantity Unit Amount
No figures
137 Providing and fixing decorative entrance gate made out 1260.00 kg 166.65
of cast iron and various mild steel tabular section
combination , the Ornamental entrance gate should be
fixed at compound wall including pattern and die
making , cutting , welding , grinding, fabrication , fixing
in position at compound wall with necessary pedestal,
bearing block and other locking arrangement. The
entrance gate should be painted with two coats of
priming coat of paint, and two coat of oil paint etc
complete. As per detail design and instruction of
architect.
138 Providing and fixing concertina coil fencing with 470.00 Rmt 669.63
punched tape concertina coil 600 mm dia 10 mt
openable length having 50 no rounds per 6 mt length,
upto 3mt height of wall with existing angle iron (50mm
x50mm x5mm )requird shaped As per Directed
Engeenier in charge. placed 2.4mt or 3.00mt apart and
with 4 horizontal R.B.T. reinforced barbed wire(3 mm)
stud tied with G.I. staples and G.I. clips to retain
horizontal, including necessary bolts or G.I.barbed wire
tied to angle iron, all complete as per direction of
Engineer-in-charge, with reinforced barbed tape
(R.B.T.)/Spring core (2.5 mm thick) and weight
gm/meter at compound wall for ESR M4/ intakewell.
139 Steel work, welded in built up sections framed work 9076.00 kg 91.08
including cutting, hoisting, fixing in position and
applying a priming coat of read lead paint & two coat oil
paint. (A)In beams and joists, channels angles Tees, flats,
with connecting plates or angle cleats as in main and
cross beams. Hip and jack rafters, purlins conneted to
common rafters and the like..
140 Providing and fixing of Ridge flashing for roof panel 303.00 Sqm 867.39
shall be made out of 0.5 mm thick pre coated GI sheet .
The Precoated sheet shall be of minimum 240 mpa steel
grade confirming to IS 14246:1995 and shall have zinc
coating of minimum 120 gsm as per IS:277:1992 , 5-7
microns epoxy primer on both side of the sheet and
polyester top coat 15-18 micron. The PPGI Sheet shall
have plastic protective guard film of minimum
microns to avoid scratches during transportation. The
ridge shall be fixed to the steel members by pop rivet or
self drilling/self stitching fastners @ maximum 450 mm
c/c along length of capping/flashing etc complete .
141 Earthwork for embankment including breaking clods, 7965.72 Cum 236.07
dressing with all lead and lift (excluding watering and
consolidation)(E) From Borrow area within 3.0 Km. lead
Item Rate In
Description of Item Quantity Unit Amount
No figures
142 Rolling and watering of Earth work in layers with power 7965.72 Cum 22.89
roller including filling in depressions which occure
during the process.
143 Supply, installation, testing & commissioning of ISI 1.00 No 65650.00
approved electrical motor driven jockey pump set
having 10.8 m3/hr. @ 70m head. The pump unit shall be
a horizontally direct mounted motor. Unit shall
comprise the following minimum requirements: a)
Pump, b) Electric motor IE2, c) Foundation bolts, d)
Mating flanges with gasket and fasteners, e) Discharge
gauges, etc. complete in all respect, with labour, with
144 Supply, installation, testing & commissioning of Priming 1.00 No 25250.00
tank, HDPE type, 1000 litres, with necessary piping
mm size, G.I pipe for priming the pumps, pipe of with
butterfly valves for isolation, Water Filling to priming
tank by piping min. 50 mm size, with all complete.
145 Supply, fabrication & erection of aboveground G.I. 'C'- 5.00 Mtr 343.40
Class, ERW piping, conforming to IS:1239, part-I, Heavy
class up to 150 mm dia. and IS:3589, for size 200 mm
dia. & above, thickness. G.I. pipe fitting's as per IS:
part-II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts bolts &
washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system
pressure, hook-up etc. Painting for piping, fittings &
structural pipe support, shall be two coat of zinc primer
and two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved drawings,
specicification and direction of the Engineer-in-Charge,
with all complete. (A) 25 mm dia.
146 Supply, fabrication & erection of aboveground G.I. 'C'- 13.00 Mtr 555.50
Class, ERW piping, conforming to IS:1239, part-I, Heavy
class up to 150 mm dia. and IS:3589, for size 200 mm
dia. & above, thickness. G.I. pipe fitting's as per IS:
part-II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts bolts &
washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system
pressure, hook-up etc. Painting for piping, fittings &
structural pipe support, shall be two coat of zinc primer
and two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved drawings,
specicification and direction of the Engineer-in-Charge,
with all complete. (B) 50 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
147 Supply, fabrication & erection of aboveground G.I. 'C'- 31.00 Mtr 1111.00
Class, ERW piping, conforming to IS:1239, part-I, Heavy
class up to 150 mm dia. and IS:3589, for size 200 mm
dia. & above, thickness. G.I. pipe fitting's as per IS:
part-II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts bolts &
washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system
pressure, hook-up etc. Painting for piping, fittings &
structural pipe support, shall be two coat of zinc primer
and two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved drawings,
specicification and direction of the Engineer-in-Charge,
with all complete. (C) 80 mm dia.
148 Supply, fabrication & erection of aboveground G.I. 'C'- 182.00 Mtr 1414.00
Class, ERW piping, conforming to IS:1239, part-I, Heavy
class up to 150 mm dia. and IS:3589, for size 200 mm
dia. & above, thickness. G.I. pipe fitting's as per IS:
part-II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts bolts &
washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system
pressure, hook-up etc. Painting for piping, fittings &
structural pipe support, shall be two coat of zinc primer
and two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved drawings,
specicification and direction of the Engineer-in-Charge,
with all complete. (D) 100 mm dia.
149 Supply, fabrication & erection of aboveground G.I. 'C'- 7.00 Mtr 1969.50
Class, ERW piping, conforming to IS:1239, part-I, Heavy
class up to 150 mm dia. and IS:3589, for size 200 mm
dia. & above, thickness. G.I. pipe fitting's as per IS:
part-II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts bolts &
washers, 3 mm thick gasket, pipe hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the system
pressure, hook-up etc. Painting for piping, fittings &
structural pipe support, shall be two coat of zinc primer
and two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved drawings,
specicification and direction of the Engineer-in-Charge,
with all complete. (E) 150 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
150 Supply, installtion, testing & commissioing of 25.00 Mtr 2585.60
Underground GI (ERW) piping conforming to IS:1239,
part-I, Heavy class ('C' class) up to 150 mm dia. and
IS:3589 Heavy class ('C' class), for 200 mm dia. & above,
min. 6.35mm thickness including Heavy class fittings,
anti-corrosive tape of size 150 mm wide x 4 mm thick,
wrapping & coating with 13KV holiday testing . Rates
shall include sand bedding of 75mm dia all around,
backfilling of the excavated including installation of
heavy pipe fitting's, flanges, etc. 10 % of all the welded
joints shall be done radiographically tested and 50% of
the joints radiographed shall be the "Field Joints".
Hydrostatic testing for 2 hours at 150% of the system
pressure, hook-up etc., complete with all accessories as
per approved drawings, specicification and direction of
the Engineer-in-Charge, with all complete. (Road
Crossing) (B) 100 mm dia.
151 Design, Supply and installation of Safety Signage made 4800.00 Sq. 9.09
of Zinc Sulphilde based glow in dark, Rigid sheet with Inch
High Luminous property enclosed in a transperent
weather proof UV stabilized plastic pasted on 3 mm
thick clear acrylic sheet such as EXITS, EMERGENCY
EXIT, DO NOT USE LIFT DURING FIRE, FLOOR
MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM
CALL POINT, FIRE HOSE REEL, FIRE HYDRANT POINT
152 Supply, installation, testing & commissioning of 2.00 No 1262.50
Pressure switch. (Range 0 to 16 kg/cm2)
153 Supply, installation, testing & commissioning of 150 mm 4.00 No 1767.50
dia. dial Burdon Type Glycerine Filled pressure gauge
with isolation ball valve arrangements with necessary
isolation valves with all complete. (Range 0 to
154 Supply, Installation, Testing & Commissioning of Cast 4.00 No 1262.50
iron body Butterfly valve according to IS: 13095, PN-1.6,
Iron Disc for size 150 mm dia. & below Lever operated
and above 150 mm dia. Gear operated complete with
mating flanges/ ANSI class # 150 with bolts & nuts
washers, rubber gaskets 3 mm thick, etc. with all
complete. (A) 50 mm dia.
155 Supply, Installation, Testing & Commissioning of Cast 2.00 No 1565.50
iron body Butterfly valve according to IS: 13095, PN-1.6,
Iron Disc for size 150 mm dia. & below Lever operated
and above 150 mm dia. Gear operated complete with
mating flanges/ ANSI class # 150 with bolts & nuts
washers, rubber gaskets 3 mm thick, etc. with all
complete. (B) 80 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
156 Supply, Installation, Testing & Commissioning of Cast 8.00 No 3019.90
iron body Butterfly valve according to IS: 13095, PN-1.6,
Iron Disc for size 150 mm dia. & below Lever operated
and above 150 mm dia. Gear operated complete with
mating flanges/ ANSI class # 150 with bolts & nuts
washers, rubber gaskets 3 mm thick, etc. with all
complete. (C) 100 mm dia.
157 Supply, Installation, Testing & Commissioning of Cast 1.00 No 3585.50
iron body Butterfly valve according to IS: 13095, PN-1.6,
Iron Disc for size 150 mm dia. & below Lever operated
and above 150 mm dia. Gear operated complete with
mating flanges/ ANSI class # 150 with bolts & nuts
washers, rubber gaskets 3 mm thick, etc. with all
complete. (D) 150 mm dia.
158 Supply, installation, testing & commissioning of Cast 1.00 No 1272.60
iron body Dual Plate Wafer Type NRV conf. to IS:
PN-1.6 complete with mating Flanges class # 150 with
bolts & nuts, washers, gaskets 3 mm thick, etc. with all
complete Accessories (A) 50 mm dia.
159 Supply, installation, testing & commissioning of Cast 1.00 No 1414.00
iron body Dual Plate Wafer Type NRV conf. to IS:
PN-1.6 complete with mating Flanges class # 150 with
bolts & nuts, washers, gaskets 3 mm thick, etc. with all
complete Accessories (B) 80 mm dia.
160 Supply, installation, testing & commissioning of Cast 3.00 No 1767.50
iron body Dual Plate Wafer Type NRV conf. to IS:
PN-1.6 complete with mating Flanges class # 150 with
bolts & nuts, washers, gaskets 3 mm thick, etc. with all
complete Accessories (C) 100 mm dia.
161 Supply, installation, testing & commissioning of SG iron 1.00 No 959.50
body SinglePlate Wafer Type NRV conf. to ASTMA
PN-1.6 complete with mating Flanges class # 150 with
bolts & nuts, washers, gaskets 3 mm thick, etc. with all
complete. accessories (A) 50 mm dia.
162 Supply, installation, testing & commissioning of SG iron 1.00 No 1060.50
body SinglePlate Wafer Type NRV conf. to ASTMA
PN-1.6 complete with mating Flanges class # 150 with
bolts & nuts, washers, gaskets 3 mm thick, etc. with all
complete. accessories (B) 80 mm dia.
163 Supply, installation, testing & commissioning of SG iron 1.00 No 969.60
body SinglePlate Wafer Type NRV conf. to ASTMA
PN-1.6 complete with mating Flanges class # 150 with
bolts & nuts, washers, gaskets 3 mm thick, etc. with all
complete. accessories (C) 100 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
164 Supply, installation, testing & commissioning of Y Type 1.00 No 3716.80
Strainer complete with mating flanges with bolts & nuts,
washers, gaskets 3 mm thick, etc. with all complete
accessories. (A) 80 mm dia.
165 Supply, installation, testing & commissioning of Y Type 1.00 No 6514.50
Strainer complete with mating flanges with bolts & nuts,
washers, gaskets 3 mm thick, etc. with all complete
accessories. (B) 100 mm Dia
166 Supply, installing, testing and commissioning of Normax 1.00 No 3535.00
make CI heavy duty ball type foot valve with flanges, nut
bolts, gaskets etc. with necessary complete accessories.
(A) 80 mm dia.
167 Supply, installing, testing and commissioning of Normax 1.00 No 4949.00
make CI heavy duty ball type foot valve with flanges, nut
bolts, gaskets etc. with necessary complete accessories.
(B) 100 mm dia
168 Supply, installation, testing & commissioning of Four 1.00 No 6565.00
way fire brigade Inlet connection with 63 mm dia.
stainless steel (SS304) instantaneous male inlets with
built in non return valve in each inlet with 150 mm dia.
header pipe, suitable rubber cap and GI chain including
nuts, bolts, washers, gasket 3 mm thick, etc. with all
169 Supply, installation, testing & commissioning of Two 1.00 No 4969.20
way fire brigade Inlet connection with 63 mm dia.
stainless steel (SS304) instantaneous male inlets with
built in non return valve in each inlet with 100 mm dia.
header pipe, suitable rubber cap and GI chain including
nuts, bolts, washers, gasket 3 mm thick, etc. with all
170 Supplying FIRE bucket round bottom of 9 liters capacity 4.00 No 994.85
made out of 24 gauge G.I Sheet with extra handle at
bottom duly painted white inside and Red out side with
FIRE mark. Filled with dry-sand and kept on existing
stand provided or hung on wall hook.
171 Supplying and erecting floor mounting Stand for keeping 1.00 No 5383.30
four nos. of FIRE buckets comprising 1500 mm in length,
900 mm height frame made out of 30mm x 30 mm x
mm angle iron with cross supports legs, welded with
hooks and duly painted with one coat of primer and two
coats of approved enamel P O red paint.
172 Supply, installation, testing & commissioning of Oblique 8.00 No 3282.50
pattern type stainless steel (SS 304) single headed
External Fire Hydrant Valve with 63 mm dia. female
instantaneous outlet conf. to IS: 5290, type - A, including
mating flanges, galvanised nuts, galvanised bolts/studs,
washers & gaskets 3 mm thick with all complete.
Item Rate In
Description of Item Quantity Unit Amount
No figures
173 Supply, installation, testing & commissioning of 63 mm 8.00 No 1161.50
dia. stainless steel (SS 304) Universal Branch Pipe conf.
174 Supply & installation, testing & commissioing of Fire 8.00 No 3999.60
Fighting Hose - conf. to IS : 636, type A (type-1), The fire
hose shall be 15 m long with 63 mm dia. stainless steel
(SS 304) couplings conf. to IS: 903, at both the ends for
connection with the hydrant valve and the branch pipe.
175 Supply, installation, testing & commissioning of 8.00 No 1136.25
fabricated from 3 mm MS sheet, hose box of size-450
mm x 600 mm x 250 mm - painted with Fire Red as per
IS: 5, shade no. 536 front 3 mm thick transparent glass
with lock & key, handle and brass hinges - to
accommodate one number of 15 mtr long hose and one
number of universal branch pipe, including supporting
arrangement with civil work.
176 Supply, Installation, testing & commissioing of Swinging 8.00 No 4848.00
type mild steel hose reel drum with 20 mm dia. x 30 mtr.
rubber hose as per IS: 884. The mounting stand shall be
of mild steel and the hose shall be fitted with a SS shut-
off nozzle & SS ball valve of 25 mm dia. including
supporting arrangement with all complete. accessories
177 Excavation of foundation, Lead And Liftting of soil work 4.00 Cum 1070.60
and RCC work
178 Filling Of Gaps Between pipe and Core Cutting Hole With 20.00 No 303.00
Chemical and Cement
179 Supply, fabrication and erection of Structure MS 150.00 Kg 80.80
Material as like Angle, C channel, I Beam Etc.
180 Supply, installation and commissioning of Flexible cable 40.00 Mtr 70.70
for 1.5 sq mm x 3 core for pressure switch
181 Supply, installation and commissioning of Copper 15.00 Mtr 181.80
Armour cable for 10 HP Motor - 4 sq mm x 3 Core (Only
Panel To Pump)
182 Supply, installation and commissioning of Copper 22.00 Mtr 429.25
Armour cable for 40 HP Motor - 10 sq mm x 3 Core (Only
Panel To Pump)
183 Supply, Filling and Fixing of approved make ABC type 12.00 No 1111.00
fire extinguisher - 6 Kg. Capacity as per IS:15683 & IS :
184 Supply, Filling and Fixing of approved make CO2 type 12.00 No 3939.00
fire extinguisher. Capacity 4.5 Kg. (conforming to IS-
185 Submitting the application to obtain Fire NOC for three 1.00 No 50500.00
year to Fire Department
186 Supply, Installation and commissioning of Air Release 2.00 No 1363.50
Valve, 25 mm Dia. connection.
187 Supply, Installation and commissioning of Fire Alarm 2.00 No 24846.00
Panel Conventional type, 4 loops with complete
accessories.
Item Rate In
Description of Item Quantity Unit Amount
No figures
188 Supply, Installation and commissioning of Audio hooters 6.00 No 1035.25
with complete accessories.
189 Supply, Installation and commissioning of Manual Call 6.00 No 974.65
Points with complete accessories.
190 Cable (Armour) for Fire Alarm system 250.00 Mtr 90.90
191 Core cutting in wall and in RCC slab with size as below: 8.00 No 404.00
(A) 50 mm dia. hole
192 Core cutting in wall and in RCC slab with size as below: 3.00 No 454.50
(B) 80 mm dia. hole
193 Core cutting in wall and in RCC slab with size as below: 6.00 No 494.90
(C) 100 mm dia. hole
194 Core cutting in wall and in RCC slab with size as below: 3.00 No 580.75
(D) 150 mm dia. hole
195 Core cutting in wall and in RCC slab with size as below: 2.00 No 868.60
(E) 200 mm dia. hole
196 Supply, installation, testing & commissioning of ISI 1.00 Set 134381.51
approved electrical motor operated Kirloskar make fire
hydrant main pump set horizontal end suction back pull
out top discharge centrifugal fire pump set with all the
standard acessories, base frame, coupling, and
foundation bolts with following specifications Model -
DB 50/26, Flow-54 m3/hr, Head-70 meter, Motor Rating
-22KW/30HP/3 ph Suc x Del - 65 x
197 Fire Hydrant Panel suitable for 10 hp Jockey pump, 30 1.00 No 82597.80
hp (54 m3/hr @ 70 m head) main electrical pump and
40 hp (97 m3/hr @ 70 m head) Diesel engine operated
pump A) Incomer MCCB - 1 Nos R Y B Indication - 1 Set
VAF Digital Meter - 1 Set B) Outgoing F1 60 HP Star
Delta Starter - 1 For Main pump F2 10 HP DOL Starter -
1 For Jockey Pump F3 Auto - On / Off Diesel Pump With
Battery Charger Control Circuit With Auto - Manual
On/Off On/Off Trip Indication On/Off Push Button C)
Fabrication Dully Powder Coated PO Red Colour,
Fabricated From 14/16 SWG,GI Sheet , IP-42 Protection,-
Fixed Type Floor Mounted Cable Entry : Bottom
198 Fire Plan Approval 1.00 No 39390.00
199 Legal Fees 3650.00 Sqm 9.09
200 Supplying of well rotted FYM manure with all lead and 9.00 Cum. 378.75
Lift including spreading mixing dressing and rolling with
hand roller etc. complete.
201 Scarifying the surface of Soil including spreading of DAP 330.00 Sqm 26.26
fertilizer mixing with Soil properly levelling gand
dressing of the plot
202 Supplying and planting Dibbing semi carpet lawn at 330.00 Sqm 20.20
distance of abour 15 cm x 15 cm after proper anti
termite teratment amd rolling the seme by hand roller
amd wetering etc complete.
Item Rate In
Description of Item Quantity Unit Amount
No figures
203 Bowing and developing flowering plants grown in 20.00 No. 30.30
nusery having approximate height 4 to 5 ft or Height ad
per Landscaps Plan with natural growith of soil packed
in polithyline bag or Earthern pot. Including organic &
chemical fertilizer Pesticides, fungicides, hormones &
maintaining the plants up to three months as deserted.
Bottol palm.
204 Bowing and developing flowering plants grown in 10.00 No. 60.60
nusery having approximate height 4 to 5 ft or Height ad
per Landscaps Plan with natural growith and nature
colour planted in alump of soil packed in polithyline bag
or Earthern pot. Including organic & chemical fertilizer
pesticides, fungicides hormones & maintaining the
plants uo to three months as deserted Trinagle Plan.
205 Bowing and developing flowering plants grown in 20.00 No. 60.60
nusery having approximate height 4 to 5 ft or Height ad
per Landscaps Plan with natural growith and nature
colour planted in alump of soil packed in polithyline bag
or Earthern pot. Including organic & chemical fertilizer
pesticides, fungicides hormones & maintaining the
plants uo to three months as Jasud
206 Bowing and developing flowering plants grown in 20.00 No. 75.75
nusery having approximate height 4 to 5 ft or Height ad
per Landscaps Plan with natural growith and nature
colour planted in alump of soil packed in polithyline bag
or Earthern pot. Including organic & chemical fertilizer
pesticides, fungicides hormones & maintaining the
plants uo to three months as Croton
207 Bowing and developing flowering plants grown in 20.00 No. 10.10
nusery having approximate height 4 to 5 ft or Height ad
per Landscaps Plan with natural growith and nature
colour planted in alump of soil packed in polithyline bag
or Earthern pot. Including organic & chemical fertilizer
pesticides, fungicides hormones & maintaining the
plants uo to three months as deserted green mahindi
208 Bowing and developing flowering plants grown in 10.00 No. 15.15
nusery having approximate height 4 to 5 ft or Height ad
per Landscaps Plan with natural growith and nature
colour planted in alump of soil packed in polithyline bag
or Earthern pot. Including organic & chemical fertilizer
pesticides, fungicides hormones & maintaining the
plants uo to three months as deserted New block ficus.
209 Labour charges for planting various plantsafter proper 100.00 No. 40.40
anti termite treatment in pits including placing property
and filling the pit with requred prepared mix soil and
wetering and dispporting etc complete.
Item Rate In
Description of Item Quantity Unit Amount
No figures
210 Maintance of the garder for 60 days after Complition of 1.00 Job. 10100.00
3 month stipulated period is completed for plantation o
lawn and plants including applying second round of
proper antitermite tretment.
211 Providnig and fixing to wall ceiling and floor 80 120.00 Rmt 447.72
Schedule Syntex / Astra (CPCV) or equivalent of the
following nominal bore tube fittings and clamps the wall
ceiling and floor (C) 40 mm
212 Providing and fixing consealed to wall, ceiling and floor 120.00 Rmt 208.80
80 Schedule Syntex / Astral (CPVC) or equivalent brand
of the following nominal bore tube fittings and clamps
including Making goods the wall ceilling and floor (A)
213 Providing and fixing brass screw doen stop cock (A) 15 2.00 Rmt 287.85
214 Rubber Hose pope 15 mm dia of approved brand and 100.00 Rmt 25.25
215 Providnig and fixing G I Nipple as directed. 2.00 No. 20.20
216 Filling available excavated Earth (Excluding Rock) in 75.00 Cumt 130.39
trench plinthside of foundation etc. in layer not
exceeding 20 cm in depth consolidation each deposited
layer by ramming and watering etc. complete.
217 Demolition and Credit of all types of Dismantling 1.00 Job 706800.00
materials from the site. Given to credit of dismantling
material if necessity of applicable. (RCC
work,Tiles,Brick,Wall Paneling,False ceiling,Doors
,window etc.as per directed engineer incharge
218 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 313.00 Pt. 485.81
wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV
grade FRLS PVC insulated multi strand copper wires up
to 10 mtr length , in below type of pipe erected with 6A
Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe
erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.(f) with medium class Rigid
PVC pipe and accessories erected concealed in
wall/ceiling complete Cat.III
Item Rate In
Description of Item Quantity Unit Amount
No figures
219 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 74.00 Pt. 674.68
1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade
FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type
electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe
erected. with necessary ceiling rose / H.D.Connector as
directed. (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling complete
220 Point wiring for on board Looped Plug with 6A Modular 57.00 Pt. 257.55
type switch & 5 pin socket erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate
modules erected on / in wall / ceiling with following
type accessories Cat.III
221 Providing following type of Modular Type Accessories 32.00 Ea. 151.50
mounted with PVC / metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (1)One No. SP 6 Amp. Cat.III
222 Providing following type of Modular Type Accessories 32.00 Ea. 151.50
mounted with PVC / metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (2) One No 5 pin plug Cat.III
223 Providing following type of Modular Type Accessories 69.00 Ea. 25.25
mounted with PVC / metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (7) Blank Plate Single Cat.III
224 Providing following type of Modular Type Accessories 35.00 Ea. 160.59
mounted with PVC / metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (8) Computer RJ-45 socket Cat.III
Item Rate In
Description of Item Quantity Unit Amount
No figures
225 Providing following type of Modular Type Accessories 40.00 Ea. 180.79
mounted with PVC / metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (9) 16 Amp. SP one way switch
226 Providing following type of Modular Type Accessories 77.00 Ea. 199.98
mounted with PVC / metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (10) 6/16Amp. Universal socket
227 Providing following type of Modular Type Accessories 37.00 Ea. 410.06
mounted with PVC / metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A
Double Pole Modular MCB Switch Cat.III
228 Providing and erecting ISI mark Medium class RIGID 840.00 Mtr. 33.33
PVC PIPES of following size complete to be erected on/in
wall or ceiling erected with necessary PVC fittings &
Junction boxes fixed with adhesive solution & Clamps
with following dia of pipes, in approved manner as
directed (b) 25 mm
229 Providing and erecting Mains with 1.1 KV grade FRLS 2880.00 Mtr. 82.82
PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected concealed in
/flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green
colour for earth continuity of following size (A) With
medium class Rigid PVC pipe and accessories (b) 2 wire
230 Providing and erecting Mains with 1.1 KV grade FRLS 888.00 Mtr. 112.11
PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected in / on wall /
ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth
continuity of following size (A) with medium class Rigid
PVC pipe and accessories (a) 2 wire 4 sq. mm
231 Providing and erecting Mains with 1.1 KV grade FRLS 250.00 Mtr. 260.58
PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected in / on wall /
ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth
continuity of following size (A) with medium class Rigid
PVC pipe and accessories (h) 4 wire 6 sq. mm
Item Rate In
Description of Item Quantity Unit Amount
No figures
232 Providing and erecting Mains with ISI marked, 1.5KV 110.00 Mtr. 56.56
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms to
IS 694, IEC - 227 erected in existing pipe of following
size (Specifically for control panel, relays, power
switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required.
(e) One wire 6.00 sq. mm
233 Providing and erecting Mains with ISI marked, 1.5KV 32.00 Mtr. 91.91
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms to
IS 694, IEC - 227 erected in existing pipe of following
size (Specifically for control panel, relays, power
switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required.
(f) One wire 10.00 sq. mm
234 Providing and erecting Mains with ISI marked, 1.5KV 30.00 Mtr. 142.41
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms to
IS 694, IEC - 227 erected in existing pipe of following
size (Specifically for control panel, relays, power
switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required.
(g) One wire 16.00 sq. mm
235 Providing and erecting Mains with ISI marked, 1.5KV 10.00 Mtr. 236.34
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms to
IS 694, IEC - 227 erected in existing pipe of following
size (Specifically for control panel, relays, power
switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required.
(h) One wire 25.00 sq. mm
236 Supplying and erecting Flexible PVC insulated multi 130.00 Mtr. 46.46
strand multi core 1.1 kv grade ISI marked copper wires
of following size to be erected as directed. (e)
Sq.mm 3 core round PVC sheathed
237 Supplying & erecting approved make LAN cable of 910.00 Mtr. 47.47
following size in existing pipe as per direction [C] CAT -
Item Rate In
Description of Item Quantity Unit Amount
No figures
238 Providing & erecting Switch board for Computer or 35.00 Ea. 1133.22
electric apparatus consisting of following modular type
accessories mounted with PVC / Metallic
concealed/open box with single mounting base frame
covered with textured/metallic /white front
plate,modules erected with necessary connections as
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories
239 Decorative call bell Ting-tong box type 250 volts 2.00 Ea. 71.71
complete erected
240 Supplying and erecting LED indoor fittings with LEDs of 113.00 Ea. 535.30
wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be made
of thick sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. &
corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
(A) Tube Light with integral driver (v) 36-40 Watts,
Surge-2 KV, IP-20, conventional 4 feet Cat.III
241 Supplying and erecting led lamps with following wattage 34.00 Ea. 112.11
capacity of 220 to 240 voltage, minimum 15000 burning
hours life, 500 V in built-surge protection,Polycarbonate
diffuser, mounting suitable for E14 / E27 / B22 lamp
holders, pf >= 0.5 (A) LED Lamps integral type, with PC
diffuser suitable LAMP holder (ii) 5 to 8 watts Cat.III
Item Rate In
Description of Item Quantity Unit Amount
No figures
242 Supplying and erecting LED indoor fittings with LEDs of 127.00 Ea. 1794.77
wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be made
of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser
housed in aluminium casted body with company
160V to 270V,Power Factor more than 0.95, THD <
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
(B) LED Panel Light with provision for Plane front frame
with translucent cover fixed to housing complete.IP20
(vi) 36 watts, 24" x 24", Surge- 2KV Cat.III
243 Supplying and erecting LED street light / Flood light 22.00 Ea. 5976.17
fittings with High power White LEDs wattage of 3 Watt
and above assembled on single MCPCB, efficiency more
than 130 lm/w and corrosion free High pressure die cast
aluminum housing with smooth finish powder coated
and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass
with company mark/name engraved or embossed
to 270 V,Power Factor more than 0.95, THD < 10 %, CCT
3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency >
%.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer
ranges shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have 440VAC
line supply with over-voltage protection. (iii) Above
to 90 watts Cat.III
Item Rate In
Description of Item Quantity Unit Amount
No figures
244 Supplying and erecting LED street light / Flood light 2.00 Ea. 4092.52
fittings with High power White LEDs wattage of 3 Watt
and above assembled on single MCPCB, efficiency more
than 130 lm/w and corrosion free High pressure die cast
aluminum housing with smooth finish powder coated
and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass
with company mark/name engraved or embossed
to 270 V,Power Factor more than 0.95, THD < 10 %, CCT
3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency >
%.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer
ranges shown.) (C) Post Top Lantern LED fitting
comprises of finish cast aluminum spigot and spun
aluminum canopy fixed with opal polycarbonate, pipe
arrangement for vertical mounting driver and
accessories wired upto terminal block.IP 65 (i)20- 30W
245 Providing and erecting Approved make Four pole 4.00 Ea. 6173.12
moulded case circuit breaker having breaking capacity
ICU of 25 KA. at 415 V,having normal current rating up
to 25 A to 100A. with Fixed thermal & magnetic release
suitable to work on A.C. supply 50 c/s. with all internal
connections, spreader tinned copper & complete erected
in existing 16 G.M.S. housing. ICS=100% of ICU only Cat
246 Providing and erecting Approved make Four pole 3.00 Ea. 8055.76
moulded case circuit breaker having breaking capacity
ICU of 35 KA. at 415 V. having normal current rating
125A. with Fixed thermal & magnetic release suitable to
work on A.C.supply 50 c/s. with all internal connections,
spreader tinned copper & complete erected in existing
16 G.M.S. housing. ICS=100% of ICU only Cat III
247 Providing and erecting Approved make Four pole 1.00 Ea. 16221.61
moulded case circuit breaker having breaking capacity
ICU of 35 KA. at 415 V. having Normal current rating
200A.with variable Thermal & magnetic release suitable
to work on A.C.supply 50 c/s. with all internal
connections, spreader tinned copper & complete erected
in existing 16 G.M.S.housing ICS=100% of ICU only Cat
Item Rate In
Description of Item Quantity Unit Amount
No figures
248 Providing and erecting Approved make Earth fault Relay 1.00 Ea. 4983.34
suitable to mount with inter connection suitable to
following size of moulded case circuit breaker having CT
ratio & MCCB rating as following along with shunt trip
220V AC. with all internal connections & complete
erected in existing M.S.housing. (2) 125 A -200 A , CT
Ratio 1/200
249 Supplying and erecting triple pole & neutral 440V / 1.45 Rn.Mtr 1961.42
500V panel mounting Copper Busbars with four equal
Nos. of electrolyte bus having current density not more
than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for
phase sequence of following current carrying capacity,
erected with necessary bus bar supports /insulators,
main cable socket to each bar, erected in existing cubical
panel with necessary connections. (A) Suitable for
Amp. Capacity
250 Supplying and erecting triple pole & neutral 440V / 1.00 Rn.Mtr 3202.71
500V panel mounting Copper Busbars with four equal
Nos. of electrolyte bus having current density not more
than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for
phase sequence of following current carrying capacity,
erected with necessary bus bar supports /insulators,
main cable socket to each bar, erected in existing cubical
panel with necessary connections. (B) Suitable for
Amp. capacity
251 providing and erecting Miniature circuit breaker single 24.00 Ea. 270.68
pole 0.5A to 2A system and having breaking capacity
KA to be erected in existing box. confirming to IS
8828/1996 with ISI Mark Cat.III
252 providing and erecting Miniature circuit breaker single 120.00 Ea. 112.11
pole 6A to 25A suitable to operate on 240 V A.C. system
and having breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with ISI Mark
253 Providing & erecting 240 V MCB double pole switch for 6.00 Ea. 330.27
motor & inductive load (C Curve) having 10 KA
breaking capacity & confirms to IS : 8828 in existing box
having following capacity (B) 40 Amp. Cat.III
254 Providing & erecting 240 V MCB double pole switch for 4.00 Ea. 278.76
lighting Load (B Curve) having 10 KA breaking capacity
& confirms to IS : 8828 in existing box having following
capacity (A) 6 to 32 Amp. Cat.III
255 Providing & erecting 415V MCB Four Pole Switch for 16.00 Ea. 578.73
Lighting Load (B curve) having 10KA breaking capacity
& confirms to IS :8828 in existing box having following
capacity (a) 6 to 32 Amp. Cat.III
Item Rate In
Description of Item Quantity Unit Amount
No figures
256 Providing & erecting 415 V MCB Four Pole for Motor & 8.00 Ea. 595.90
Inductive Load (C Curve) having 10KA breaking
capacity & confirms to IS :8828 in existing box having
following capacity (a) 6 to 32 Amp. Cat.III
257 Providing & erecting 415 V MCB Four Pole for Motor & 1.00 Ea. 737.30
Inductive Load (C Curve) having 10KA breaking
capacity & confirms to IS :8828 in existing box having
following capacity (c)63 Amp. Cat.III
258 Sheets steel powder coated enclosure suitable for 4.00 Ea. 176.75
incorporating One/Two nos. MCB.
259 Providing and erecting Sheet Steel powder coated MCB 10.00 Ea. 2339.16
distribution board - flush / surface mounted fitted with
busbar, neutral link, earth bar and DIN rail, Conforms to
IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for (B) three
phase incoming and single phase horizontal type
outgoing Per phase isolation type (PPI) (b) sheet steel
double door (i)4 way
260 providing and erecting Approved make RCCBs 30.00 Ea. 1969.50
conforming to IS: 12640 and having sensitivity of 30 mA
and Short Circuit withstand capacity of 10 KA and
suitable for operation on single phase 240 V,50Hz.
having characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic
component. for following Max. rating erected as
directed (i) 25 Amps.DP Cat.III
261 providing and erecting Approved make RCCBs 4.00 Ea. 2235.13
conforming to IS: 12640 and having sensitivity of 30 mA
and Short Circuit withstand capacity of 10 KA and
suitable for operation on single phase 240 V,50Hz.
having characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic
component. for following Max. rating erected as
directed (ii) 40Amps. DP Cat.III
262 Providing and erecting HOT deep Galvanised iron strip 36.00 Kg 77.77
wire 8 to 16 SWG.
263 Providing and erecting Pipe type earthing having 150 8.00 Ea. 368.65
cms.long and 2.5 cms. dia. galvanised iron pipe with
coupling and buch buried in specially prepared earth pit
complete with necessary 8 SWG earth wire.
264 For using salt and charcoal / coke as required for pipe 11.00 Ea. 171.70
type earthing.
Item Rate In
Description of Item Quantity Unit Amount
No figures
265 Supplying & erecting in earthpit of minimum bore dia. 4.00 Ea. 5842.85
225mm size approved make Safe Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-1987
made of corrosion free hot dipped G.I.Pipes having
Outer pipe dia of 80 mm having 80-200 Micron
galvanising, Inner pipe dia of 40 mm having 200-250
Micron galvanising, connection terminal dia of 14 mm
with constant ohmic value surrounded by highly
conductive compound with high charge dissipation
suitable for following type of applications with chamber
and heavy duty cover (A)(approved make OEM has to
submit test certificate including value of earth resistance
of installation duly stamped and signed by agency and
officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having back
filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as per
IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry
form, Sulphar content:- <2%(C) Back fill Compound :-
Earthing compound should be capable to retain
moisture for long time Necessary test report must be
submitted by Agency. [A] For electrical installation up to
Length of Pipe - 1 Mtr
Back filling compound - 1 Nos. of Bag of 15 Kgs.
Item Rate In
Description of Item Quantity Unit Amount
No figures
266 Providing & erecting weather proof, dust & vermin 3.00 Sq.Mtr 14902.55
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type cubical
panel board necessary IP-42 and above protection as
per approval from engineer incharge made from 14 SWG
thick CRC M.S. sheet for outer body & doors, 16 SWG
thick CRC M.S.sheet for internal partitions with
necessary accesories , supporting angles/ flats channel
including cutting, bending, drilling, welding, riveting
with internal partitions & cable alley as per
requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable
size of inter connecting PVC copper wire / copper-
aluminium strips, rubber grommets, rib, bakelite control
fuses/MCB for measuring instruments, earth bus &
earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking
arrangement and rubber gasket,heavy duty end terminal
connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel shall be
painted with epoxy powder coating. (The rates excludes
the cost of switchgears, bus bars, inter connecting mains
& Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base beams)
The panel shall be supplied with following approved
manufacturers with following size. (B) The standard
companies switch gear shall be used and only
manufacturers at CPRI approved factory (i) with
mm depth, erecting , fabricating the M.S. structure as per
267 Providing 47.00 Kg. 77.77
requirement on site incorporating proper size of M.S.
angles,square,round, flats, bars, channels, sections
complete with cutting, welding, grinding & finishing duly
painted with one coat of red oxide with erection on site
as per direction of engineer in charge with necessary
grouting, cementing, plastering & finishing complete.
268 Providing and erecting XLPE(IS:7098)(I)-88 ISI 125.00 Mtr. 284.82
armoured cable multistrand Aluminium conductor for
1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables (C)
1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)
269 Providing and erecting XLPE(IS:7098)(I)-88 ISI 20.00 Mtr. 378.75
armoured cable multistrand Aluminium conductor for
1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables (D)
1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)
Item Rate In
Description of Item Quantity Unit Amount
No figures
270 Providing and erecting XLPE(IS:7098)(I)-88 ISI 155.00 Mtr. 540.35
armoured cable multistrand Aluminium conductor for
1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables (F)
1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)
271 Providing and erecting XLPE (IS:7098)(I)-88 ISI 529.00 Mtr. 126.25
armoured cable multistrand / Solid Aluminium
conductor for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe of following size of
cables (B) 4 core 6 Sq. mm
272 Making trench in soft soil of suitable width of 90 cm 319.00 Mtr. 55.55
deep for laying cable or locating the fault all over the
run and back filling the same and making the surface as
normal ground.
273 Supplying following size of Light duty “A” Class G.I . 55.00 Mtr. 300.98
Pipe & erecting as directed by Engineer-in-charge. (B)
274 Supplying following size of Light duty “A” Class G.I . 35.00 Mtr. 471.67
Pipe & erecting as directed by Engineer-in-charge. (C)
80 mm dia.
275 Providing & laying approved make Double walled 264.00 Mtr. 62.62
corrugated pipes (DWC) of polyethylene(conforming to
IS 14930 II )with necessary connecting accessories of
same material at required depth in existing trench for
laying of cable. below ground / road surface for
enclosing cable (A)50 mm outer dia
276 Providing & laying approved make Double walled 105.00 Mtr. 95.95
corrugated pipes (DWC) of polyethylene(conforming to
IS 14930 II )with necessary connecting accessories of
same material at required depth in existing trench for
laying of cable. below ground / road surface for
enclosing cable (C))90 mm outer dia
277 Providing and, fixing heavy duty flange type brass cable 48.00 Ea. 38.38
gland with rubber ring for PVC insulated armoured
cable complete with out going tails, insulating tape etc
for following size of cables.(B) 2 to 4 core 6 Sq. mm
278 Providing and, fixing heavy duty flange type brass 4.00 Ea. 75.75
double compression type cable gland with rubber ring
for PVC insulated armoured cable complete with out
going tails, insulating tape etc for following size of
cables. (B) 3 & 1/2 core 35/50 Sq. mm
279 Providing and, fixing heavy duty flange type brass 4.00 Ea. 103.02
double compression type cable gland with rubber ring
for PVC insulated armoured cable complete with out
going tails, insulating tape etc for following size of
cables. (C) 3 & 1/2 core 70 Sq. mm
Item Rate In
Description of Item Quantity Unit Amount
No figures
280 Providing and, fixing heavy duty flange type brass 2.00 Ea. 140.39
double compression type cable gland with rubber ring
for PVC insulated armoured cable complete with out
going tails, insulating tape etc for following size of
cables. (E) 3 & 1/2 core 120 Sq. mm
281 Solder less crimping type Aluminium lugs conforming to 192.00 Ea. 6.06
IS suitable for cable of following size evenly crimped
with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an
approved manner. (A) 1.5/ 2.5/4/6 Sq.mm
282 Solder less crimping type Aluminium lugs conforming to 8.00 Ea. 20.20
IS suitable for cable of following size evenly crimped
with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an
approved manner. (D) 35/50 Sq.mm.
283 Solder less crimping type Aluminium lugs conforming to 16.00 Ea. 25.25
IS suitable for cable of following size evenly crimped
with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an
approved manner. (E) 70 Sq.mm.
284 Solder less crimping type Aluminium lugs conforming to 8.00 Ea. 45.45
IS suitable for cable of following size evenly crimped
with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an
approved manner. (G) 120 Sq.mm
285 Supply, Installation, Testing and Commissioning of 74.00 Ea. 2629.03
suitable sweep, BEE 5 Star rated, Ceiling fan with Brush
Less Direct Current (BLDC) permanent ferrite magnet
Motor, class of insulation: B, Rust free 3 nos.Aluminium
blades, 2 nos. canopies, shackle kit with earthing
provision, copper winding, Power factor not < 0.9,
Service Value (CMM/W) minimum 6.85, Air delivery
minimum 215 CMM, 350 RPM,230v (tolerance as per IS :
374-2019), THD < 10%, compitible with electronic
regulator unit for Speed Control and all remaining
accessories including safety pin, nut bolts, washers,
temperature rise = 75 degree C (Max.), suitable for
to 285 Voltage and rectifier circuit with surge, over
current and overload protection , 50 Hz, Single phase AC
Supply, earthing etc. Complete as required.[ Make shall
be approved by Engineer in Charge] (A) 1200 mm
Sweep (48")
286 Supplying and erecting 19 / 20 mm. nominal bore 74.00 Mtr. 108.07
Medium Class M.S. Pipe down rod erected duly painted
for fan complete with proper insulation without leakage
and earthing.
Item Rate In
Description of Item Quantity Unit Amount
No figures
287 Supplying & erecting fan hook box of 10 mm M.S. round 74.00 Ea. 108.07
bar bounded to the RCC bars up to 50mm length each
side and pierced through a 16 Gauge M.S. box / Heavy
Duty PVC box complete erected concealed in Ceiling
with necessary finishing.
288 Supplying & erecting approved make low noise 35.00 Ea. 1366.53
decorative exhaust fan having square frame ABS body
with inbuilt lowers & square frame. 250mm with
RPM Cat.II
289 Supplying and erecting approved make Octagonal pole 13.00 Ea. 8192.11
made from HR sheet steel. The pole should be made as
per IS. and shall be coated with hot dip galvanizing as
per IS 2629/2633/4759, suitable suspend local wind
speed with integral Junction box consist of terminal
plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be
erected With Suitable foundation (Included) as per
details given by manufacturer considering site
requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm
bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4-M20 Bolts and
600mm long with necessary G.I. J Bolts .Approx Pole
weight 59 kg
290 Supplying & erecting approved make SMC press 11.00 Ea. 515.10
moulded composite FRP. loop-in, loop-out approx. 2mm
thick box complete with Bakelite connector strip
5way(3P+N+E),DIN rail for mounting mob & hinged
doors as per requirement having locking arrangements
with mounting clamp with nuts, bolts & washers
suitable for erection on pole with cable clamps& earth
bolt of following size of box. (B) 250mm x 200mm x
100mm [deep]
291 Supplying and erecting Street light pole bracket 13.00 Ea. 491.87
comprising main B Class GI pipe of 4.2 cm/require
outside dia. complete with suitable B Class G.I. sleeve
tubing of approx. 45cms.length and suitable for
76.5mm/80mm/require size of pole top having nuts and
bolts for fixing the brackets and having spread of
mtr. Length with 110 deg.with vertical plane and
suitable welded stiffener reducer and nipple with check
nut complete painted with one coat.of Red oxide / PU
base primer and two coats of Aluminium / PU paint.
paint with following nos of arms. [A] Single Arm bracket
292 Supplying and erecting B class Galvanized iron pipe 9.00 Ea. 215.13
having smooth finished bore of the pipe on both ends
erected nuts and bolts along the pole / wall shaping the
pipe as per site requirement. Pipe dia as following. (B)
Item Rate In
Description of Item Quantity Unit Amount
No figures
293 Providing & erecting water cooler having storage 4.00 Ea. 55893.40
capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @
an ambient temp of 45˚ C. The outlet temp. of the water
should drop by 15˚C within a hour, The water cooler
should be comprising of hermetically sealed
compressor, fan motor, condensing unit, water tank
surrounded by evaporating, coil, thermostats, relay
etc.complete with necessary inlet & outlet connection.
The body of water cooler will be made from Stainless
294 Supplying & erecting 5 stage single reverse osmosis 4.00 Ea. 29187.99
water purification system with M.S. powder coated
frame, prefilter housing with 'O' ring presediment filter
GAC filter, carbon filter suitable buster DC pump
capacity 80 psi, mention with 40 psi inline type post
carbon filter auto low & high pressure switches with
following size of storage tank & LPH capacity & erected
as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster
295 Supplying and erecting horizontal / vertical mounting 4.00 Ea. 15195.45
type storage water heater with copper container housed
in M.S./S.S./ABS body insulated with glass wool/puff
complete with heating elements,adjustable thermostats
300C to 850C, indicating lamp, safety valve, fusible plug,
etc.complete erected with coach bolts, nuts. washers &
cementation (E)50 Ltr. with 2 KW. heating element
Premium Category
296 Supplying, installing, testing & commissioning of SOLAR 1.00 Ea. 102530.15
WATER heating system as per prevailing IS code
comprising of Solar flat locket collector, stainless steel
hot water storage isolated tank with S.S. heat exchanger,
absorber made of copper sheet & copper tube of
following capacity in liter / day (LPD) with "B" size
aluminium box collector with appropriate capacity
electrical backup arrangement (Excluding inlet & outlet
pipe lines) (D) Capacity of 500 LPD
297 Supplying and erecting approved make panel mounting 1.00 Ea. 1275.63
type Digital Voltmeter having 3 digits LED display, 0 to
750 AC Volts range erected on existing panel board
with all connection, wiring etc .with manufacturers
calibration certificate.
298 Supplying and erecting approved make panel mounting 1.00 Ea. 1558.43
type Digital Ammeter having 3 digits LED display,
external CT operated, calibrated for 0 to 1000 Amps
suitable to operate on 500 Volt AC , erected on existing
panel board with all connection, wiring etc .with
manufacturers calibration certificate.
Item Rate In
Description of Item Quantity Unit Amount
No figures
switch for 3 phase AC Supply 500 V on existing panel
board with necessary connections.
300 Providing & erecting L.T. Current Transformer with bar 3.00 Ea. 274.72
primary 50/5 to 1000/5 ratio 15 VA burden erected in
existing CRCA box duly secured with insulating
materials connected to the meter
301 Supplying and erecting approved make suitable panel 6.00 Ea. 43.43
indicator LED type lamp, lens cover, complete erected
with necessary connections.
302 SITC of Vertical Air Termination Solid aluminium with 8.00 Ea. 9416.23
Base- 10 mm dia and 1000 mm long. Air Termination
Base tested for conditioning, Ageing Test & Lightning
impulse current withstand test: 100 kA of 10/350µs
waveform in an accredited Third party laboratory as per
6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST
34mm dia 3000 mm long- Cold Galvanized
303 SITC of 8 mm dia solid Aluminium Conductor for roof 267.05 Mtr. 299.97
top mesh grid and tested as per IEC 62561-
conducted in the Govt. accredited thirty party
laboratory to meet the requirement of IS/IEC
with Required Accessories - Aluminium Holding clamp
at every 1 mtr distance, Aluminium/SS cross splicer at
every crossing of Alu. conductor, Expansion piece with
connectors at every 20 mtr distance, Aluminium straight
Splicer to connect conductors. All Accessories should be
tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning
& Ageing Test & 6.4 for Lightning impulse current
withstand test: 100 kA of 10/350µs waveform(Ageing &
Electrical test ) conducted in a sequence manner &
tested in the Govt. accredited Third party laboratory to
meet the requirements of IS/IEC
304 SITC of Galvanized Steel Flat 25x6 mm thickness from 144.00 Mtr. 154.53
earth electrode directly in ground as required. Zinc
coating: 500 g/m square (Approx:70 micron coating)
tested and used exclusively for lightning protection
earthing system and ring equipotential bonding.
305 SITC of 14.2 mm dia 3 mtr long Earth electrode of High 8.00 Per Set 5992.33
tensile steel electrode with 250 micron copper bonding
& 1 bag of Carbon fill Based environment friendly
backfill tested as per IEC 62561-7 in NABL accredited
Laboratory and suitable stainless Steel double sided
clamp. Eco Friendly rust proof heavy duty weather proof
Polyethylene Earth Pit Chamber with following
dimensions :254 mm dia (top), 330 mm dia (bottom) &
260 mm (height).
Item Rate In
Description of Item Quantity Unit Amount
No figures
306 Supply, Installation, Testing & Commissioning of 60.00 Per KW 40658.56
following size of Grid Tied Solar Power Plant with
Solar Panels (ALMM approved): Frame Material :
Anodized Aluminum alloy Frame With Twin Wall
Profile, Front Cover : High Transmission Low-Iron
Tempered Glass (AR Coated), High efficency and
positive power tolerance Pmax: 0/+5, Module Efficiency
should be approx. 19.5%-22%, Normal operating
temperature 45'C, Junction Box with Waterproof IP67 &
MC4 Compatible and Enclosed with Bypass diodes,
100% Electroluminescence test to ensure error free
Modules, Thep. temp. co-efficient of the PV module shall
equal or better than -0.45%/degree C. Solar PV modules
of minimum fill factor 75% to be used. Unit Production:-
More than 4.5 Unit /kw /day (Actual)(1Year Avg) With
10 year Product warranty and 25 year Linear Power
Warranty includes all mechanical and electrical
parameters of the Solar panel. Modules must be
complied to the DCR(Domestic content requirements).
The Ration of AC to DC is 5:6 for the Installation capacity
which are given in AC KW.
Solar Inverter: MPPT Range: MPPT Range: 80-1000 V
Max efficiency: 97.5% - 98.9%, O/p Frequency:
50/60Hz, Operating Altitude (m) ≤4000, O/p Power
Factor: ~1, O/P THDi: <3%, Operating Tempreture
Range: -25~60°C, Integrated protection of Inverter are
Anti-islanding Protection, Input Reverse Polarity
Protection, Insulation Resistor Detection, Ground fault
protection, Residual Current Monitoring Unit, Output
Item Rate In
Description of Item Quantity Unit Amount
No figures
Integrated, Input Reverse Polarity Protection Integrated,
Insulation Resistor Detection Integrated, Residual
Current Monitoring Unit Integrated, Output Over
Current Protection Integrated, Output Short Circuit
Protection Integrated, Output Over Voltage Protection
Integrated, Protection Degree: IP65, User Interface LCD
& APP,Datalogger & Communication: GPRS / Wi-Fi,
Module Mounting Structure: The mounting (Rectangular
pipe / square pipe / circular pipe) with requisite cross
bars, nuts and bolts, etc. shall be Hot deep galvanized
with minimum 80micron coating. The Rectangular /
square /circular hollow pipe section used for the
structure should have a minimum thickness of 2.0 mm.
other than above, the material thickness should be
minimum 2.5 mm. A certificate of a structural engineer
certifying the strength and stability of the mounting
structure to withstand the weight and wind speed of
km/hour throughout the life span of 25 years of the
system, shall be submitted by the vendors. Hot Dipped
Galvanized steel coils. suitable arrangement for base
plate for foundation , solar panel mounting, the
structure should be suitable for carry the load of solar
panel,wiring, sprinkler system etc. with necessary
foundation work/wall mount, j bolt, anchor fastner etc.
the nut bolt used for installtion of stucture should be (SS
304) quality.The ground clearance of the bottom most
edge of solar panel shall not be less than 300 mm to
1200 mm or as per site’s technical/feasibility
requirement.
(Excluding All charges namely GEDA Application fees,
Solar connectivity Charges, Meter connectivity Charges,
Meter testing Charges and system stability/strenthning
charges.) (E) Grid Tied Solar Power System: 51 - 100 kW
(3 - phase)
307 Providing & erecting Automatic solar panel cleaning 60.00 Per KW 3553.18
system for solar power projects which includes
necessary plumbing work (UPVC pipes and accessories)
from source of water to project site (upto
meters),Suitable size of sub mercible/ open well motor,
necessary wiring for motor and sprinkler system with
safety, timer circuit for automatically on/off the
sprinkler system, necessary size oand number of
nozzles/JET (minimum 1 Nozzle/Jet per module). (E)
51KW-100KW Cleaning System
Total Rs.
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and
words) of the estimated rate mentioned above. Amount of my /our
Tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Item Rate In
Description of Item Quantity Unit Amount
No figures
Deduct………% below Add………% Above
In words In words
The Credit Value of Dismentalled Materials of Amount Rs. 2144892.96 shall be recovered from the 1st Running Bill
of the Contractor.
The Contractor shall exhibit a board with detailed specification and details of work as directed by the
2 Engineer-In-Charge for which no extra payment shall be made.
3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
4 Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
5 there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate i.e. 6176/- per mt. mentioned in all the tender.
Deputy Executive Engineer Executive Engineer
Navsari ( R & B ) Sub Division Navsari ( R & B ) Division
Navsari Navsari
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. SBD - Farmer Traning Centre Eru.pdf
Document
2. BOQ - Farmer Traning Centre Eru.pdf
3. Specification - Farmer Traning Centre Eru.pdf
4. Building-Specification Booklet.pdf
5. Special Condition Electric.pdf
6. Nominated Electrical Sub Contractors.pdf
7. Specification (Electrical Work).pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .