REPAIR TO JOINERIES AT NORTH OF RAILWAY LINE UNDER GE MISAMARI

Amount

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames), complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and as directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position, complete all as specified and as directed.

Dismantling fillets, rails, posts, rafters, purlins etc. under 40 Sq. Cm in section, complete all as specified and as directed.

S&F second class hard wood plain fillets in rectangular or triangular in section, clean swan secured with screws or beads sectional area exc.13sq cm but n.exc.25 sq cm complete all as specified and as directed.

M&L for 2nd class hard wood in scantling wrought timber unframed and fixed, complete all as specified and as directed.

Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and directed.

S&F 50 mm thick second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting) complete all as specified and directed.

All as per item No 10 above but 20 mm thick planed both sides.

S & F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and as directed.

S&F for 2nd class hard wood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square with rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc (size of members of shutters as specified in SSR Par –I section 8 Clause 8:24 (b) complete all as specified and directed.

S & F Solid pvc Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc, complete all as specified and as directed.

Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.

S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron), complete all as specified and as directed.

S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws etc complete all as specifid power coating of any colour(thickness of power coating not less than 50 micron, complete all as specified and as directed.

S&F for anodised window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron), complete all as specified and as directed.

M&L for taking down and refixing the same existing aluminium door shutters for carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling as required complete all as specified and as directed. each shutter area n. Exc 2 Sqm.

Taking down wooden shutters exc 1 sqm but not exc 2 sqm and resecuring or easing & adjusting and refixing in same opening, complete all as specified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

S & F in repair Cast iron body door cioser hydraucally regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg, complete all as specified and as directed.

S&F for anodised Alum sliding window and ventiletor frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section & shutter made up 38 mm / 20 mm/1.5 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc complete all as specified and as directed.

S&F for power coated aluminium (minimum thickness of powder coating 50 micron) work in doors, windows,venteleters, partitions ( fixed portion with extruded built up standared tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size inclu necessary fillings up the gaps at junctions i;e top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechinically wherever required inclu cleat angle, Aluminium snap beadingfor glazing/ panelling, CP brass/ staineless steel screws, complete all as specified and as directed.

M&L in repairs PVC board 18/19 mm thick 100% LEAD Free density not less then 600 Kg/Cbm (prelaminated single side) as in kitchen cabinets, cup boards, and similar work with and incl piano hinges, magnetic catcher one peace each shutter and 100mm long SS handles complete all as specified and as directed.

M&L for fixed in repairs for 18/19 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work, complete all as specified and as directed.

M&L for fixed in repairs for 12 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work, complete all as specified and as directed.

S&F anodised aluminium grill ( anodised trasparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC15 of approved design/pattern with approved standared section and fixed to the exising windows frame with CP brass/ stainless steel screws @ 200 mm centre to centre all complete as per requirments, complete all as specified and as directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, complete all as specified and as directed.

Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and as directed.

Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and as directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and as directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast, complete all as specified and as directed.

S&F mild steel flat iron of size 50x3mm as in hold fast, complete all as specified and as directed.

Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provoding and fixing new ones, complete all as specified and as directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

Supply and fixed in repair GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

Supply and fixed GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed, complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

S & F 300 mm long MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises, complete all as specified and as directed.

Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4, complete all as specified and as directed. .

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, complete all as specified and as directed.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 32x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed in ceiling, complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick colour wood grained PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per spcifications and drawing, complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frames as per specifications, complete all as specified and as directed.

M&L for preparation of new surfaces of walls by brooming down or by steel wire brushing and applying three coat white wash, complete all as specified and as directed.

M&L for preparation of old surfaces of walls by brooming down or by steel wire brushing and applying one coat cement base paint, complete all as specified and as directed.

Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint, complete all as specified and as directed.

M/S L N ENTERPRISE

shree kamakhya traders

Saraswati Auto Works

Sunrise Enterprise

R D ENTERPRISE